Operation Manual

16
En
This is an example of connection using the Tuner.
Digital Connection (A-9050 only)
Tip
• The Tuner can be connected to the COAXIAL D1 or D2 jack or
the OPTICAL D3 jack. However, when using the u interlock
function, be sure to connect the Tuner to the COAXIAL D2 jack.
Analog Connection
Tip
• A Tuner can be connected to the LINE IN 1/2/3/4 jack.
However, when using the u interlock function, be sure to
connect the Tuner to the LINE IN 2 jack.
Connecting a Tuner
1
Connect coaxial digital cable to the COAXIAL D2
jack.
2
Set the RI MODE switch to TUNER D2.
Integrated Amplifier
Tuner
1
Connect an audio pin cable to the LINE IN 2 jack.
2
Set the RI MODE switch to TUNER LINE 2.
(A-9050 only)
Integrated Amplifier
Tuner