Owner's Manual

25
En
Advanced Operations
Custom Setup
When the Auto Standby (ASb) function is activated, the
integrated amplifier will automatically enter Standby
mode if there is no operation for 30 minutes with no audio
signal input.
You can set the impedance of the speakers that you
connect to the unit. (A-9050 only)
Caution
• Settings will not be enabled even when the selector is changed in
the Standby mode.
To change a setting, be sure to turn on the unit prior to making
any changes.
Setting the Auto Standby Function
1
Switch the AUTO STANDBY selector on the unit’s
rear panel.
` [ON]
Enables auto standby.
` [OFF]
Disables auto standby.
AUTO STANDBY selector
Setting the speaker impedance
1
Switch the SPEAKER IMPEDANCE selector on
the unit’s rear panel.
` [4 Ω or more and less than 8 Ω]
Sets the impedance to 4 Ω.
` [8 Ω or more and 16 Ω or less]
Sets the impedance to 8 Ω.
SPEAKER IMPEDANCE selector