User Guide

12
En
Connections
Connections
The power cord must be connected only after all other cable connections are completed.
∫Screw-type speaker terminals
Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the
ends of the speaker cables, and twist the bare wires
tightly, as shown.
∫Banana Plugs (North American models)
• If you are using banana plugs, tighten the speaker terminal before inserting the banana plug.
• Do not insert the speaker code directly into the center hole of the speaker terminal.
Connecting Your Speakers
Speakers A
Speakers B
Right Left
Right Left
Integrated Amplifier
1/2" to 5/8" (12 to 15 mm)
SN29402928A_A-9150_En_1704XX.book 12 ページ ２０１７年５月１８日 木曜日 午後５時５分