User Guide

14
En
Note
• Push plugs in all the way to make good connections (loose connections can cause noise or
malfunctions).
• To prevent interference, keep audio cables away from power cords and speaker cables.
• The integrated amplifier’s optical digital jack have shutter-type covers that open when an
optical plug is inserted and close when it’s removed. Push plugs in all the way.
• To prevent shutter damage, hold the optical plug straight when inserting and removing.
• Do not use digital audio signals other than PCM.
*
An analog audio cable can be used instead of a coaxial cable. However, we recommend that you use a coaxial or a composite video
cable.
Cable and Jacks
Optical digital audio
Optical digital connections allow you to enjoy digital sound such as
PCM. The maximum sampling rate for PCM input is 192 kHz/24 bit,
2ch.
Coaxial digital audio
*
Coaxial digital connections allow you to enjoy digital sound such as
PCM. The maximum sampling rate for PCM input is 192 kHz/24 bit,
2ch.
The integrated amplifier provides 75-ohm impedance matching.
Analog audio (RCA) Analog audio connections (RCA) carry analog audio.
To use (Remote Interactive), you need to connect your Onkyo
CD Player, Tuner, Network Audio Player, or Dock to the
integrated amplifier with an cable.
OPTICAL
Orange
L
R
White
Red
Right!
Wrong!
SN29402928A_A-9150_En_1704XX.book 14 ページ ２０１７年５月１８日 木曜日 午後５時５分