User Guide
23
En
You can switch inputs to select the desired source
component. Choose an input from the following:
D1 (Default value), D2, D3, D4, LINE1, LINE2, LINE3,
LINE4, PHONO, MAIN IN
The LED corresponding to the selected input will light up.
Tip
• The LED will blink when D1, D2, D3 or D4 is selected and a
signal is not input.
∫Operating with the remote controller
∫Operating on the integrated amplifier
By bypassing the tone control circuit, the Direct function
uses the shortest path for enhanced sound quality (Default
value is "On"). Also, since the left/right balance setting
uses a system that doesn’t affect the sound quality, the
balance can be adjusted even if the Direct function is
enabled (
Ä page 24
).
From the warm low notes produced by a cello to the deep
frequencies of electronic music, a good compact audio
system should be able to deliver plenty of bass resonance.
While traditional enhancement systems effectively boost
low-frequency sound, they are often prone to the effects of
phase shifting, which can overwhelm mid-range
frequencies and muddy the sound.
Our Phase-Matching Bass Boost technology effectively
preserves mid-range clarity-allowing vocals and strings to
shine-while maintaining a smooth, powerful bass response
at all volume levels (Default value is "Off").
Selecting the Input Source
1
Press INPUT
D
/
C
repeatedly.
1
Use the INPUT selector.
INPUTD/C
INPUT selector
Using the Direct Function
1
Press the DIRECT button.
The DIRECT LED lights.
Using the PHASE MATCHING BASS
Function
1
Press the PHASE MATCHING BASS button.
The PHASE MATCHING BASS LED lights up.
DIRECT LED DIRECT button
PHASE MATCHING
BASS LED
PHASE MATCHING
BASS button
SN29402928A_A-9150_En_1704XX.book 23 ページ 2017年5月18日 木曜日 午後5時5分