User Guide

9
En
1 DIGITAL IN OPTICAL D3/D4 jack
Connects components such as CD players with optical
digital audio output.
2
REMOTE CONTROL jack
Connect Onkyo components such as Network Audio
Player, Onkyo Docks, CD Players, or Tuner with
(Remote Interactive) jacks.
3 PHONO (MM/MC) L/R jacks
Connect a turntable with analog audio output.
4 GND screw
Connects the turntable’s ground wire.
5 MAIN IN L/R jacks
Connect a pre-amplifier when the integrated amplifier
is used as a power amplifier.
6 PRE OUT L/R jacks
Connect a power amplifier when the integrated
amplifier is used as a preamplifier (Pre mode).
7 DIGITAL IN COAXIAL D1/D2 jacks
Connect components such as CD players with coaxial
digital audio output.
8 AUTO STANDBY selector
Switch the auto standby function (
Ä page 25 ) on or
off.
9 LINE IN 1/2/3/4 L/R jacks
Connect playback devices with analog audio output.
: LINE OUT L/R jacks
Connect components such as analog line-level
sources. The input signals are output with no level
adjustment.
; SPEAKERS A terminals
Connect Speakers A.
< SPEAKERS B terminals
Connect Speakers B.
= AC INLET
Connects the supplied power cord. The other end of
the power cord should be connected to a suitable wall
outlet.
Rear Panel



 
  
See "Connections" for connection information
(
Ä page 12 ).
SN29402928A_A-9150_En_1704XX.book 9 ページ ２０１７年５月１８日 木曜日 午後５時５分