Owner's Manual

En-24
Using the Timers (remote controller only)
The ABX-N300 provides three different timers: two program timers that can automatically play your iPod/iPhone at the
specified time, and a sleep timer that can put the unit in standby mode after the specified duration has elapsed.
Selecting the timer number
You can set up to two timers.
Setting the time
You can set the timer-on time and timer-off time.
Specifying the day of the week
You can choose “Everyday” to make the timer operate
each day, or choose “Every” and specify the days of the
week on which the timer will operate.
Setting the playback volume
You can specify the volume for timer playback.
Caution
• If the operating time of the two timers overlaps, the
timer that would have turned on later will not operate.
Please leave at least one minute between the off-time
of the first timer and the on-time of the second timer.
• If you’ve set the sleep timer within the time that a
timer had turned the power on, the power will operate
according to the sleep timer.
• Insert your iPod/iPhone into the iPod dock, and
prepare it for playback.
1
While the ABX-N300 is in standby mode,
press the [TIMER] button.
If the ABX-N300 is powered-on, press the []
button to enter standby mode.
2
Use the []/[] buttons to select “Timer1
Setup” or “Timer2 Setup,” and press the
[ENTER] button.
3
Use the []/[] buttons to select “Timer1
On” or “Timer2 On,” and press the [ENTER]
button.
4
Use the []/[] buttons to set the timer-on
time, and press the [ENTER] button.
5
Use the []/[] buttons to set the timer-off
time and press the [ENTER] button.
ENTER
TIMER
F/H
SLEEP
SNOOZE
M
O
Q/R
About the Timers
Setting a Timer
Timer1 Setup
Timer2 Setup
Clock Setup
Timer1 Setup
Off 7:00
Timer1 On
On 6:30