User's Manual
En-14
Basic Operation
To turn on the ABX-N300, press the [M ON/
STANDBY] button on the ABX-N300 or remote
controller.
Press the [M ON/STANDBY] button again to set the
ABX-N300 to Standby.
If an iPod/iPhone is connected to the ABX-N300, the
iPod/iPhone will be charged.
Press the [INPUT] button of the ABX-N300 or the
remote controller to switch the input.
You can choose from iRadio, Media Server, iPod/
iPhone, or LINE (the connected external device). Each
time you press the INPUT button, the input will cycle
through the following choices.
Press the VOLUME Up [F] button to increase the
volume or the VOLUME Down [H] button to decrease it.
You can also use the remote controller’s VOLUME [F]/
[H] buttons.
You can adjust the volume in the range of Min, 1–49,
Max.
To mute the ABX-N300, press the remote controller’s
[MUTING] button.
“Muting” appears on the display for a few seconds.
To unmute the ABX-N300, press the [MUTING] button again.
Tips:
While the ABX-N300 is muted:
•Press the VOLUME [F]/[H] buttons on the
ABX-N300 or pressing the VOLUME [F]/[H] buttons
on the remote controller will unmute the ABX-N300.
• If you turn the ABX-N300 off, the next time you turn
it on, the ABX-N300 will be unmuted.
You can adjust the brightness of the downlight.
Press the remote controller’s [DIMMER] button.
Each time you press the button, the brightness will cycle
through the following settings.
1
Press the [TONE] button to make the
display indicate “Tone Control.”
2
Use the [
F
]/[
H
] buttons to adjust the value.
You can adjust the value in the range of –3 to +3.
3
Press the [ENTER] button.
The value of the Treble setting will blink.
4
Use the [
F
]/[
H
] buttons to adjust the value.
5
Press the [ENTER] button.
The original display will reappear.
Note:
• If you press no buttons for eight seconds, the previous
display will appear automatically.
MON/STANDBY
INPUT
O
ENTER
VOLUME F/H
MENU
F/H
M
DIMMER
MENU
ENTER
O
INPUT
C/U
VOLUME
F/H
MUTING
TONE
F
/
H
Downlight (below the speakers)
Turning On the ABX-N300
Selecting the Input Source
Adjusting the Volume
Muting the ABX-N300
(remote controller only)
Changing the Downlight Brightness
(remote controller only)
Adjusting the Bass and Treble
Bright
Normal
Dim
Off
#$:0A'PDQQM2CIG6WGUFC[5GRVGODGT2/