Instruction manual

EN
36
9.15 Adjusting the Picture
You can adjust the picture quality and store the setting you have adjusted on “Memory1” to “Memory (Source Direct)”.
1. During playback, press [MODE] to display the play menu.
2. Use [Î / ï] to select “Picture Control”, then press [ENTER].
3. Use [Î / ï] to select a memory from “Memory1” to “Memory (Source Direct)” to store your setting, then press
[ENTER].
• When “Video Resolution” is set to “Source Direct”, “Picture Control” will be set to “Memory (Source Direct)”
automatically.
Picture Control
Memory1
4. Use [Î / ï] to select an item to be adjusted, then press [ENTER] and use [Î / ï] to adjust the setting.
Brightness
Contrast
Progressive Mode Auto
Item Description Adjustment range Default setting
Contrast
Adjusts the difference between the bright and dark parts
of the picture.
-7 to +7 0
Brightness Adjusts the brightness of the picture. 0 to +15 0
Sharpness
*
Adjusts the sharpness of the picture. -2 to +2 0
Gamma Correction
*
Adjusts the dark positions of the picture. -2 to +2 0
ICR Red Adjusts the red colour of the picture. 0 to +7 0
ICR Blue Adjusts the blue colour of the picture. 0 to +7 0
ICR Green Adjusts the green colour of the picture. 0 to +7 0
Colour Adjusts the colour density of the picture. -7 to +7 0
Hue Adjusts the balance between the green and red. -7 to +7 0
Noise Reduction Reduces noise in the luminance signal and chroma signal. Off, 1to 3 Off
MPEG NR Reduces block noise and mosquito noise. Off, 1to 3 Off
Edge Enhancer Emphasizes the edge of the picture. Off, Soft, Middle, Strong Off
Qdeo True Color
Adjusts the smoothness of the picture. It is available for
10 or 12 bit display.
Off, Low, Middle, High Off
Progressive Mode Selects the setting of the progressive scan. Auto, Video Auto
*
) It may take several seconds to reflect the adjusted setting.
D Note
• The setting remains even you turn the unit into the standby mode except unplug the AC cord.
• ICR is the abbreviation of Intelligent Color Remapping.
• Qdeo True Color Processing (QTC) dynamically expands 8-bit video to use the full dynamic range offered by 10 and
12 bit displays, eliminating contours while preserving detail.
• Qdeo True Color is adjustable and effective when this unit is connected with the display device which is compatible
with Deep Colour.
• Picture control setting is available only video output from HDMI OUT MAIN jack.
E5XB0_2ED_EN_Book.indb 36E5XB0_2ED_EN_Book.indb 36 2011/04/30 14:18:052011/04/30 14:18:05