English Compact Disc Player Before using C-705TX Connections Instruction Manual COMPACT DISC PLAYER TR-1 STANDBY/ ON STANDBY DISPLAY C-705TX Operations DUAL OPTICAL OUTPUT Other Information
Before using Thank you for purchasing ... Thank you for purchasing Onkyo C-705TX CD player. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new C-705TX. Please retain this manual for future reference.
Important Safeguards 1. Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions – All operating and use instructions should be followed. 5.
Precautions 1. Warranty Claim You can find the serial number on the rear panel of this unit. In case of warranty claim, please report this number. 2. Power WARNING BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY. The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz) written on the rear panel.
FCC INFORMATION FOR USER CAUTION: The user changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Operations Other Information NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Precautions For Canadian model CAUTION: THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSION FROM DIGITAL APPARATUS SET OUT IN THE RADIO INTERFERENCE REGULATIONS OF THE CANADIAN DEPARTMENT OF COMMUNICATIONS. For models having a power cord with a polarized plug: CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Table of contents Connections Connecting to Onkyo Separate Collection series components ......................... 8 Connecting to the other components ........................................................... 10 Operations Other Information Handling CDs ................................................................................................ 19 Troubleshooting ............................................................................................ 20 Indexed to parts and controls ............
Connections Connecting to Onkyo Separate Collection series components This section introduces you to the other Separate Collection Series system components and their convenient system functions, followed by instruction on how to connect the system. The following Separate Collection Series components are available: • A-905TX ........... Integrated Stereo Amplifier • T-405TX ............ Stereo tuner • K-505TX ........... Stereo Cassette Tape Deck • MD-105TX ........
Using the remote controller The unit is not shipped with a remote controller. However, you can use a remote controller (RC456S) that is shipped with the A-905TX/R-805TX amplifier. A-905TX / R-805TX 30° 30° 5m C-705TX RC-456S Connections Remote control sensor Before Using Remote controller RC-456S When the remote controller RC-456S supplied with the amplifier A-905TX/R-805TX is used, operate the remote controller pointing towards the amplifier’s remote sensor.
Connecting to the other components Before connecting • Do not connect the unit’s AC power cord to a wall outlet until you have completed all the other connections. • On each pair of connectors, a red connector (marked R) corresponds to the right channel, and a white connector (marked L) to the left channel. Connect white plugs of audio connection cables to L connectors and connect red plugs of audio connection cables to R connectors.
Connections ANALOG OUTPUT AC OUTLET L Audio connection cable 1 cable L To wall outlet 50Hz DIGITAL OUTPUT OPTICAL 2 "CLASS 1 LASER PRODUCT" Before Using 1 AC 230-240V UNSWITCHED 100W MAX. REMOTE CONTROL R 3 2 R CD connector Optional Optical fiber cable MD recorder, CD recorder, DAT deck, etc. 1 Connection with the Amplifier Connect the ANALOG OUTPUT connectors on the rear panel of C-705TX and the amplifier’s CD input connectors using the audio connection cable.
Connecting to the other components Connecting the connector If you are using other ONKYO components equipped with connectors, you can control these components using the amplifier‘s remote controller. Before connecting • The amplifier must be connected in the system hookups for control operations. • Each component has two connectors. There is no difference between those connectors. • The components may be connected in any order.
Operations Playing CDs RC-456S Disc tray STANDBY/ON STANDBY/ ON STANDBY/ ON CLOCK SLEEP GRAPHIC EQ EFFECT MODE (Supplied with A-905TX/R-805TX) TUNER INPUT PRESET FM AM TAPE PAUSE / STEP DVD COMPACT DISC PLAYER REPEAT TR-1 MD SCROLL PLAY MODE CLEAR REC DUAL OPTICAL OUTPUT REPEAT MEMORY CD RANDOM CLEAR STANDBY/ ON DISC CDR REPEAT PLAY MODE STANDBY TONE CLEAR TIMER 1 2 3 4 5 6 7 8 9 REC DISPLAY MUTING C-705TX UP/DOWN VOLUME --/- - - 10 / 0 REMOTE CONTROLLER Nor
Playing CDs RC-456S COMPACT DISC PLAYER STANDBY/ ON CLOCK TR-1 SLEEP GRAPHIC EQ EFFECT MODE (Supplied with A-905TX/R-805TX) TUNER INPUT PRESET FM AM DUAL OPTICAL OUTPUT TAPE PAUSE / STEP DVD STANDBY/ ON REPEAT PLAY MODE CLEAR STANDBY DISPLAY REPEAT MEMORY MD SCROLL REC CD RANDOM CLEAR DISC C-705TX , CDR REPEAT PLAY MODE TONE CLEAR TIMER 1 2 3 4 5 6 REC MUTING UP/DOWN 7 8 9 ENTER --/- - - 10 / 0 REMOTE CONTROLLER Starting playback from a given track VOLUME ACO
Checking the elapsed or remaining time Display information Before starting playback after you have inserted a disc a b a b 1 6 2 7 3 8 5 4 9 • When the number of tracks exceeds 15, the >15 indicator lights. After you have started playback a c c DISPLAY SINGLE ELAPSED 1 6 2 7 3 8 4 9 REMAIN 1 6 2 7 3 8 4 9 TOTAL REMAIN 1 6 2 7 3 8 4 9 5 b d DISPLAY SINGLE SINGLE ELAPSED 1 6 2 7 3 8 5 5 4 9 Connections Shows how long the current track has been playing.
Playing CDs RC-456S STANDBY/ ON CLOCK SLEEP GRAPHIC EQ EFFECT MODE (Supplied with A-905TX/R-805TX) TUNER INPUT PRESET FM AM TAPE COMPACT DISC PLAYER PAUSE / STEP TR-1 DUAL OPTICAL OUTPUT REPEAT TR-1 PLAY MODE CLEAR REPEAT DVD MD SCROLL REC CD RANDOM STANDBY/ ON MEMORY RANDOM CLEAR DISC CDR REPEAT PLAY MODE STANDBY DISPLAY TONE CLEAR TIMER 1 2 3 4 5 6 7 8 9 REC MUTING C-705TX UP/DOWN VOLUME ACOUSTIC PRESENCE ENTER --/- - - 10 / 0 REMOTE CONTROLLER Playing the fir
RC-456S STANDBY/ ON CLOCK SLEEP GRAPHIC EQ EFFECT MODE (Supplied with A-905TX/R-805TX) TUNER INPUT PRESET FM AM TAPE CLEAR PAUSE / STEP REPEAT PLAY MODE CLEAR REPEAT MEMORY MEMORY DVD MD SCROLL REC CD RANDOM CLEAR DISC CDR REPEAT PLAY MODE TONE CLEAR TIMER 1 2 3 4 5 6 7 8 9 --/- - - 10 / 0 REC MUTING UP/DOWN VOLUME REMOTE CONTROLLER Number buttons Before Using ACOUSTIC PRESENCE ENTER RC-456S How to enter track numbers Memory play To enter track #5 : 5 To ent
Playing CDs RC-456S STANDBY/ ON CLOCK SLEEP GRAPHIC EQ EFFECT MODE (Supplied with A-905TX/R-805TX) TUNER INPUT PRESET FM AM TAPE PAUSE / STEP REPEAT REPEAT MEMORY PLAY MODE CLEAR REPEAT MEMORY DVD MD SCROLL REC CD RANDOM CLEAR DISC CDR REPEAT PLAY MODE TONE CLEAR TIMER 1 2 4 5 7 8 REC MUTING 3 6 UP/DOWN 9 VOLUME ACOUSTIC PRESENCE ENTER --/- - - 10 / 0 REMOTE CONTROLLER To quit Memory play Press the MEMORY or (OPEN/CLOSE) button.
Other Information Handling CDs Playable discs Taking the CD out of the disc case This unit can play back the following discs. Disc mark Audio Disc size Maximum playback time 12 cm 74 minutes 8 cm (CD single) 20 minutes You cannot play back discs other than those listed above. Do not play CD-ROMs intened for computer use or non-audio compact discs. Doing so may cause high-pitched noises or other unpredictable results that may damage speakers, amplifiers, and other connected components.
Troubleshooting If you have any problems with the unit, please check the troubleshooting table below first. For any problems not covered in the table, please consult your nearest Onkyo authorized service center. Symptom Cause Remedy STANDBY/ON button is pressed, but power does not come on. • Power cord plug is not properly connected to AC outlet. • Insert the plug firmly. • The R-805TX’s energy save function is enabled (when the R-805TX is connected). • Press the R-805TX’s STANDBY/ON button.
Indexed to parts and controls For operational instructions, refer to the page indicated in parentheses.
Indexed to parts and controls Remote controller Remote controller supplied with the A-905TX/R-805TX (RC-456S) To operate the supplied remote controller, make the appropriate connection to the nectors.
Specifications Signal readout system : Optical non-contact Reading rotation : About 500 – 200 r.p.m. (constant linear velocity) Linear velocity : 1.2 –1.4 m/s Error correction system : Cross Interleave Reed Solomon code Sampling frequency : 352.8 kHz (Eight-times oversampling) Output level : 2 volts r.m.s.
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8111 Fax: 072-833-5222 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 E-mail: onkyo@onkyousa.com ONKYO EUROPE ELECTRONICS GmbH Industriestrasse 20, 82110 Germering, GERMANY Tel: 089-849-320 Fax: 089-849-3265 E-mail: info@onkyo.de ONKYO CHINA LIMITED Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung, N.T.
