Operation Manual

31
Listening to the Radio —Continued
With the Auto Preset function, you can automatically preset all of the FM radio stations available in your area in one go.
Presets make it easy to select your favorite stations and eliminate the need to tune the radio manually each time you want
to change stations. The Auto Preset function does not preset AM radio stations (see page 32).
Note:
Depending on your location, a preset may be stored with
no station, and you’ll hear only noise when you select it.
In this case, delete the preset (see page 37).
After Storing Presets You Can:
• Select them (see page 33)
• Name them for easy identification (see page 35)
• Copy them (see page 36)
• Erase them (see page 37)
Presetting FM Stations Automatically (Auto Preset)
1
Press the [TUNER] or INPUT
[ ]/[ ] buttons repeatedly until
“FM” appears.
Make sure the FM antenna is positioned
to achieve the best possible reception.
2
Press the [EDIT/NO] button, and
then use the Previous and Next
[ ]/[ ] buttons to select
AutoPreset?.
3
Press [ENTER].
The confirmation message “AutoPre-
set??” appears.
To cancel the Auto Preset function at this
point, press the [EDIT/NO] button.
ENTER
EDIT/NO
TUNER
/
INPUT
/
or
4
To start the Auto Preset function,
press [ENTER].
Up to 20 stations can be preset and pre-
sets are stored in frequency order.
Any existing presets will be deleted when the
Auto Preset function is run.
Auto Preset Caution!
CBX-100_En.book Page 31 Friday, September 15, 2006 9:34 AM