Operation Manual

En-37
Listening to the Radio—Continued
With the Auto Preset function, you can automatically preset all of the FM radio stations available in your area in one
go. Presets make it easy to select your favorite stations and eliminate the need to tune the radio manually each time you
want to change stations. The Auto Preset function does not preset AM radio stations (see page 38).
1
Press the [TUNER] button, or the [INPUT]
button on the top panel, repeatedly until
“FM” appears.
Make sure the FM antenna is positioned to achieve
the best possible reception.
2
Press the [MENU] button, and then use the
Up/Down []/[] buttons to select
“AutoPreset?”.
3
Press [ENTER].
The confirmation message “AutoPreset??” appears.
To cancel the Auto Preset function at this point,
press the [MENU] button.
4
To start the Auto Preset function, press
[ENTER].
Up to 30 stations can be preset and presets are
stored in frequency order.
Note:
• Depending on your location, a preset may be stored
with no station, and you’ll hear only noise when you
select it. In this case, delete the preset (see page 44).
After Storing Presets You Can:
• Select them (see page 40)
• Name them for easy identification (see page 42)
• Copy them (see page 43)
• Erase them (see page 44)
Presetting FM Stations Automatically (Auto Preset)
TUNER
MENU
ENTER
,
SNOOZE
INPUT
C
D
USB
iPod
INPUT
Any existing presets will be deleted when the
Auto Preset function is run.
Auto Preset Caution!