User manual

C-701A
SPECIFICATIONS
Signal readout system : Optical non-contact
Reading rotation : About 500 - 200 r.p.m.
(constant linear velocity)
Linear velocity : 1.2 - 1.4 m/s
Error correction system :
Cross Interleave Reed Solomon code
D/A converter : 1 bit D/A converter
Sampling frequency : 352.8 kHz
(Eight-times oversampling)
Number of channels : 2 (stereo)
Frequency response : 5 Hz - 20 kHz
Total harmonic distortion : 0.009% (at 1 kHz)
Dynamic range : 92 dB
Signal to noise ratio : 80 dB
Channel separation : 80 dB (at 1 kHz)
Wow and Flutter :
Below threshold of measurability
Output level : 2 volts r.m.s.
Power consumption :
AC 230-240 V, 50 Hz model : 8 watts
AC 220-230V, 50Hz/60Hz : 8 watts
AC 120 V, 60 Hz model : 9 watts
Power supply rating :
AC 230-240 V, 50 Hz
AC 220-230V, 50Hz/60Hz
AC 120 V, 60 Hz
Dimensions (W x H x D) :
155 x 76 x 283.5 mm <MGR> model
6-1/8" x 3" x 11-3/16"
155 x 76 x 281.5 mm <MPP/MGT> model
6-1/8" x 3" x 11-1/16"
Weight : 2.0 kg, 4.4 lbs.
Specifications and external appearance are subject to
change without notice because of product improvements.
<MPP>: European model only
<MDT>: Taiwanese model only
<MGT>: Asian model only
<MGR>: Chinese model only
CONFIRM THE FL DISPLAY
1) Press the STANDBY key ON.
2) Press and hold down the STOP button, then
press the UP button.
After " 010702A" (Microprocessor version) is
displayed. All the segments of FL tube light up
after 1 seconds.
3) Press the STOP key . ("NO KEY" is displayed)
4) Confirm the each key.
5) Press the STANDBY key to release the test mode.
155 x 76 x 277.5 mm <MDT> model