Specifications

Basic Operations—Continued

Using Headphones

Turn down the volume, then connect your stereo

headphones to the [PHONES] minijack.

You can adjust the volume and mute the sound, by

using the [VOLUME] control.

The speakers output no sound while the headphones

are connected.

Notes

When you select iPod as the input source, the

headphones output no sound. If use headphones,

connect it directly to iPod/iPhone.

Muting the Sound

To mute the output of the stereo receiver,

press the remote controller’s [MUTING]

button. The MUTING indicator flash on

the display.

To unmute the stereo receiver, press the

[MUTING] button again.

Notes

While the stereo receiver is muted:

• Turning the [VOLUME] control on the stereo receiver

or pressing the VOLUME [ ]/[ ] buttons on the

remote controller will unmute the stereo receiver.

• If you turn the stereo receiver off, the next time you

turn it on, the stereo receiver will be unmuted.

Adjusting the Bass, Treble and

Balance

You can adjust the bass, treble and balance using the

selector on the front panel.

The Default setting is “0”. You can adjust the bass and

treble from -6 to +6, and the balance from L6 to R6.

Using the Direct Function

To turn the Direct function on or off, press

the [DIRECT] button on the stereo

receiver. When the Direct function is off,

the tone controls can be used to adjust the

sound. When the Direct function is on, the

tone controls are bypassed, so you can

enjoy a pure sound, and the DIRECT LED

lights up.

PHONES jack

MUTING

VOLUME

BASS/TREBLE/BALANCE

DIRECT

indicator