Specifications

iPod / iPhone Playback—Continued
39
Playing iPod/iPhone
Notes
• During playback on the iPod nano or iPod (5th
generation), “ONKYO” is displayed on the iPod
display and the quick wheel cannot work.
When the playback stops, the “ONKYO” disappears
and the quick wheel can work.
• The volume level is adjusted by using the VOLUME
[ ]/[ ] buttons on the remote controller.
Adjusting the volume on your iPod/iPhone has no
effect.
• In case you inadvertently move your iPod/iPhone
volume control, make sure the volume level is not
set too high before you reconnect your headphones.
• During playback, press the [DISPLAY] button
repeatedly to display the following Track
information.
1
Connect your iPod/iPhone to the
USB connector on the front panel of
the stereo receiver using the USB
cable.
Notes
• Once you have connected the iPod /
iPhone to the stereo receiver, no sound
heard through headphones if you connect
it to the [PHONES] jack on the receiver.
Connect the headphones directly to the
iPod/iPhone.
2
Select “USB” using the [USB] button
on the remote controller or the
[INPUT] knob on the stereo receiver.
When no iPod/iPhone is connected, “No
USB” will be displayed.
3
To start playback, press the [ ]
button.
Playback will start with the top file in the
folder organization (see page 29, File #1).
To stop playback:
Press the [ ] button.
To pause playback:
Press the [ ] button. The Pause indicator
appears. To resume playback, press the
[ ] button again.
iPod
Artist name
Title name
Album name