Specifications

Listening to the Radio—Continued
48
Presetting FM/AM Stations Automatically (Auto Preset)
With the Auto Preset function, you can automatically preset all of the FM or AM radio stations available in your area in
one go. Presets make it easy to select your favorite stations and eliminate the need to tune the radio manually each time
you want to change stations.
Notes
Depending on your location, a preset may be stored
with no station and you will hear only noise when you
select it. In this case, delete the preset (see page 54).
You can also use the front panel controls.
1 Press the [INPUT] knob repeatedly until “FM” or
“AM” appears.
2 Push the [MULTI JOG] control, and then turn it to
select “AutoPreset?”
3 Push the [MULTI JOG] control. The confirmation
message “AutoPreset??” appears.
4 To start the Auto Preset function, push the [MULTI
JOG] control.
After Storing Presets You Can:
• Select them (see page 50)
• Name them for easy identification (see page 51)
• Copy them (see page 52)
• Erase them (see page 54)
TUNER
/
MENU/NO
!
Caution
Any existing presets will be deleted when the Auto
Preset function is run.
1
Press the [TUNER] buttons
repeatedly until “FM” or “AM”
appears.
Make sure the FM antenna is positioned to
achieve the best possible reception.
2
Press the [MENU/NO] button, and
then use the Previous and Next
[ ]/[ ] buttons to select
“AutoPreset?”.
3
Press [ ].
The confirmation message “AutoPreset??”
appears.
To cancel the Auto Preset function at this
point, press the [MENU/NO] button.
4
To start the Auto Preset function,
press [ ].
Up to 20 stations can be preset and presets
are stored in frequency order.