Instruction manual

22
iPod / iPhone Playback
Compatible iPod/iPhone models
Made for:
iPod touch (1st, 2nd, 3rd and 4th generation),
iPod classic, iPod nano (2nd, 3rd, 4th, 5th and 6th
generation), iPhone 4S, iPhone 4, iPhone 3GS,
iPhone 3G, iPhone
Note:
• With the following iPod/iPhone, the charging mode
does not work when it is connected in standby mode.
iPod touch (1st, 2nd and 3rd generation), iPod nano
(2nd generation), iPhone 3GS, iPhone 3G, iPhone
Tip:
• You can also use the [INPUT] button and
[MENU/ENTER] jog dial on the front panel.
• The [RETURN] button is used as a menu button.
• For the basic button operation and play mode, refer to
“Playing Music Files on a USB Flash Drive” (see
page 23). With some iPod/iPhone models and
generations, certain buttons may not work as
expected.
Selecting Tracks
Press the Previous/Next [7]/[6] buttons to select
the previous or next track.
Tip:
• For the basic play mode, refer to “Playing Music Files
on a USB Flash Drive” (see page 23). With some
iPod/iPhone models and generations, certain buttons
may not work as expected.
• The [RETURN] button is used as a menu button.
• The Arrow [!]/["] buttons are used to scroll up and
down the list and file.
Note:
• To adjust the volume, use the VOLUME [q/w] button.
You can also use the [VOLUME] control on the CD
receiver.
• If you use your iPod/iPhone with any other
accessories, iPod/iPhone playback detection may not
work.
You can display various information about the music
files currently playing.
During playback, press the [DISPLAY] button
repeatedly to display the following music file
information.
•Title name
•Artist name
• Album name
Playing an iPod/iPhone via USB
1
Press the [USB] button.
2
Connect the USB cable that comes with the
iPod/iPhone to the USB port on the front of
the CD receiver.
The message “iPod” appears.
Tip:
• When connecting your iPod/iPhone with a USB
cable, we recommend you use an official USB
cable from Apple Inc.
3
Use the Arrow [!]/["] buttons to select a
folder, and then press [ENTER] to open it.
4
Use Arrow [!]/["] buttons to select a
music file, and press [ENTER] or the Play
[1] button to start playback.
iPod/iPhone Playback via Onkyo
Dock
• Before using the Onkyo Dock components, update
your iPod/iPhone with the latest software, available
from the Apple web site.
• Set the CD receiver’s Input Display to “DOCK”.
For details, refer to “Sel Change” (see page 30).
1
Use the [INPUT SELECTOR] button to select
“DOCK”.
2
To start playback, press [ENTER] or the Play
[1] button.
To pause playback:
Press the [3] button. To resume playback, press the
[3] button again.
To Fast-Forward or Fast-Reverse
During playback, press and hold the Fast Forward
[4] button to fast forward, or the Reverse [5]
button to fast reverse.
Displaying Music File Information