DV-CP706 DVD Changer Instruction Manual

23
Powering Up & Setting Up the DV-CP706
Before connecting the power cord, connect all your AV
components (see page 18 to page 22).
Don’t forget to turn on your TV or projector and select
the video input to which the DV-CP706 is connected.
If you’re using a hi-fi amp, AV receiver, or surround
sound decoder for audio playback, turn that on as well
and select the audio input to which the DV-CP706 is
connected.
The very first time you turn on your DV-CP706, the Ini-
tial Setup menu appears on-screen, as shown.
Here you need to specify the size of your TV (standard
4:3 or widescreen 16:9), specify a HDMI output setting,
and select a language for the on-screen setup menus. You
can change these settings later by using the on-screen
setup menus (see page 43).
Powering Up the DV-CP706
1
Connect the supplied power cord
to the DV-CP706’s AC INLET.
2
Plug the other end of the power
cord into a suitable wall outlet.
The DV-CP706 enters Standby mode,
and the STANDBY indicator comes on.
When you disconnect the power cord,
always disconnect it from the wall out-
let first, and then the DV-CP706’s AC
INLET.
STANDBY indicator
STANDBY
ON/STANDBY
ON
ENTER
3
To turn on the DV-CP706, press
the [ON/STANDBY] button (or the
remote controller’s [ON] button).
The DV-CP706 comes on, the display
lights up, and the STANDBY indicator
goes off.
To turn off the DV-CP706, press the
[ON/STANDBY] button (or the remote
controller’s [STANDBY] button). The
DV-CP706 enters Standby mode and
the STANDBY indicator comes on.
First Time Setup
1
Use the remote controller’s Up/
Down [ ]/[ ] buttons to select a TV
shape, and then press [ENTER].
See page 44 for more information on
the TV Shape options.
The HDMI Output Setting menu
appears.
2
Select a HDMI Output Setting
option, and then press [ENTER].
See page 45 for more information on
the HDMI output options.
The On-Screen Language menu
appears.
3
Select a language, and then
press [ENTER].
See page 47 for more information on
the language options.
The Initial Setup menu closes.
Remote controller
Initial Setup
TV Shape
On-Screen Language
HDMI Output Setting
4:3 Letter box
4:3 Pan Scan
16:9 Widescreen
√ 16:9 Compressed
Remote controller
Remote controller
Remote controller
DV-CP706_En.book Page 23 Wednesday, July 2, 2008 10:25 AM