Contents Before using Compact Disc Player Important Safeguards........................ 2 Precautions ....................................... 3 Features............................................. 4 Supplied accessories......................... 4 Before operating this unit ................. 5 System connections .......................... 6 DX-7222 Instruction Manual Operation Playing CDs...................................... 7 Using the memory function ............ 10 Useful Functions...................
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING AVIS RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Precautions For U.S. model For British model The laser is covered by a housing which prevents exposure during operation or maintenance. However, this product is classified as a Laser Product by CDRH (Center for Devices and Radiological Health) which is a department of the Food and Drug Administration. According to their regulations 21 CFR section 1002.
Precautions Features 1. Warranty Claim You can find the serial number on the rear panel of this unit. In case of warranty claim, please report this number. ■ 2. Recording Copyright Recording of copyrighted material for other than personal use is illegal without permission of the copyright holder. 3. Power WARNING BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY. The voltage of the available power supply differs according to country or region.
Before operating this unit Setting the Voltage selector (Worldwide models only) ANALOG OUTPUT DIGITAL OUTPUT DIGITAL OUTPUT OPTICAL 1 OPTICAL 2 REMOTE CONTROL COMPACT DISC PLAYER MODEL NO. DX-7222 L RATING: WARNING AVIS RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR R 220-230V 120V VOLTAGE SELECTOR VOLTAGE SELECTOR 220-230V Worldwide models are equipped with a voltage selector to conform with local power supplies.
System connections Connecting other components • Do not plug in the AC power cord until all other connections have been made. • On each pair of input or output jacks, the jack marked R corresponds to the right channel, and the jack marked L to the left channel. Refer to the amplifier’s instruction manual for further information on connections. • Avoid bundling the audio connection cables with the power cord or speaker cables. Doing so may degrade sound reproduction.
Playing CDs PAUSE STOP PLAY Disc tray POWER DISPLAY , 1 2 3 REPEAT 4 5 6 MEMORY 7 8 9 CLEAR +10 0 NEXT SELECTION TIME EDIT DX-7222 PEAK SEARCH A−B , SHUFFLE OPEN/CLOSE REMOTE CONTROLLER 1 2 3 Remote controller 4 TRACK DISC 1 2 3 4 5 6 7 8 9 10 11 12 OVER TOTAL REMAIN Normal play 1. Press the POWER button to turn on the power. 2. Press the OPEN/CLOSE button. 3. Put the disc in the disc tray, with the label side of the disc facing up. 4. Press the OPEN/CLOSE button.
Playing CDs PLAY PHONES DISPLAY DISPLAY PHONES LEVEL , , DX-7222 1 2 3 REPEAT 4 5 6 MEMORY 7 8 9 CLEAR +10 0 NEXT SELECTION TIME EDIT PEAK SEARCH A−B / DISPLAY , 1 – 9, 0, +10 SHUFFLE / REMOTE CONTROLLER RC-402C Listening with the headphones • Plug the headphones with a standard binaural (stereo) plug into DX-7222 • the PHONES jack, and then adjust the sound level using the PHONES LEVEL knob.
Playing CDs DISPLAY 1 2 3 REPEAT 4 5 6 MEMORY 7 8 9 CLEAR +10 0 NEXT SELECTION TIME EDIT PEAK SEARCH A−B SHUFFLE REMOTE CONTROLLER REPEAT SHUFFLE A-B RC-402C Repeating play (Remote controller only) Remote controller REPEAT REPEAT Remote controller REPEAT REPEAT REPEAT 1 1 Remote controller A−B A 2 B Flashes Remote controller A−B A 1 A−B Point A B 2 Lights A−B Point B Press the REPEAT button to enter the repeat play mode.
Using the memory function • Up to 36 tracks can be stored in memory. STOP PLAY DISPLAY 1 2 3 REPEAT 4 5 6 MEMORY 7 8 9 CLEAR 0 NEXT SELECTION TIME EDIT DX-7222 +10 / , / PEAK SEARCH A−B CLEAR MEMORY 1 RC-402C Storing a program into memory and playing it Remote controller MEMORY MEMORY 2 1 – 9, 0, +10 SHUFFLE REMOTE CONTROLLER MEMORY CLEAR DX-7222 Remote controller 1 2 3 4 5 6 7 8 9 +10 0 1. Press the MEMORY button. 2.
Using the memory function Memory reverse function Remote controller MEMORY TRACK MEMORY DISC When track numbers 2, 4, 6, 8 and 10 have been stored in memory, Press the MEMORY button. All tracks which have not been stored in memory will be stored in memory, replacing the previous contents. When you press the PLAY button, the CD player will start playing.
Useful Functions DISPLAY , 1 2 3 REPEAT 4 5 6 MEMORY 7 8 9 CLEAR +10 0 NEXT SELECTION TIME EDIT PEAK SEARCH A−B 1 NEXT SELECTION NEXT 1. During playback, press the NEXT SELECTION button. 2. While the “– –” is flashing, select the next desired track using the number buttons and the +10 button. After playing the current track, the selected track will be played.
Useful Functions DISPLAY , 1 2 3 REPEAT 4 5 6 MEMORY 7 8 9 CLEAR +10 0 NEXT SELECTION TIME EDIT PEAK SEARCH A−B REMOTE CONTROLLER RC-402C Peak search 1 Remote controller This function searches for the peak sound level on the disc. When using the memory mode, press the MEMORY button to return to normal mode. PEAK SEARCH Flashes Lights PEAK SEARCH PEAK SEARCH 2 Remote controller A−B 3 A–B PEAK SEARCH SHUFFLE Remote controller 4 Remote controller 1.
Control positions and names Note: If there is a protective film on the surface of the display, making it difficult to read the display, remove it. For more information about the function of a particular button, please turn to the page listed in the brackets ([ ]) following each name.
Control positions and names Remote controller DISPLAY 1 6 2 1 2 3 REPEAT 4 5 6 MEMORY 7 8 9 CLEAR +10 0 NEXT SELECTION TIME EDIT PEAK SEARCH A−B SHUFFLE 7 8 3 9 10 11 4 1. Open/Close button [7] 2. CD operation buttons : Pause button [7] : Stop button [7, 11, 13] : Play button [7, 10, 13, 21] : Fast reverse button [8] : Fast forward button [8, 11] : Down button [8, 12] : Up button [8, 12] 3. Number buttons and +10 button [8, 10, 12] 4. PEAK SEARCH button [13] 5.
Troubleshooting Guide • No power. Cause: Power cable is not properly plugged into the AC outlet. Remedy: Insert the power plug firmly. • A disc is loaded in the disc tray, but playback will not start. Cause: A disc in the disc tray may be upside down. Remedy: Load the disc with the label facing upward. Cause: The disc is dirty. Remedy: Clean the disc. Cause: Moisture has accumulated inside the CD changer.
