Instruction manual

ManualsBrandsONKYO Manualsaudio & home theatreHT-BD6315 B

Video Output Resolution

■ When the non-copy protected media is playing back

■ When the copy protected media is playing back

* Output resolutions for NTSC video sources.

HDMI OUT connection

• If you select a resolution manually and then connect the

HDMI jack to TV and your TV does not accept it, the

resolution setting is set to “Auto”.

• If you select a resolution that your TV does not accept,

the warning message will appear. After resolution

change, if you cannot see the screen, please wait 20 sec-

onds and the resolution will automatically revert back to

the previous resolution.

• The 1080p video output frame rate may be automatically

set to either 24 Hz or 50 Hz/60 Hz depending both on the

capability and preference of the connected TV and based

on the native video frame rate of the content on the

BD-ROM disc.

COMPONENT VIDEO OUT Connection

BD and DVD video stream could prevent up-scaling on

analog output.

VIDEO OUT connection

The resolution of the VIDEO OUT jack is always output

at 576i/480i resolution.

Color Systems

BD and DVD are recorded in different color systems

throughout the world. The most common color system,

used primarily in the U.K. and other EU countries, is PAL.

This unit uses the PAL system. However, it is also possible

to play back BD and DVD using other color systems, such

as NTSC.

HDMI OUT COMPONENT VIDEO OUT

HDMI connected HDMI disconnected

576i

576p/480p* 576i/480i*

576p

576p/480p* 576p/480p*

720p

720p 720p

1080i

1080i 1080i

1080p 24 Hz

1080p 24 Hz 576i/480i* 576p/480p*

1080p 50 Hz

1080p 50 Hz/60 Hz* 576i/480i* 576p/480p*