HT-R393 AV RECEIVER Basic Manual Advanced Manual found here http://www.onkyo.com/manual/htr393/adv/en.
Before Start About the Basic Manual Features The Basic Manual leads you through the fundamental steps to enjoy the AV Receiver from connections to TV, speaker system and playback devices, to necessary functions for playback. As well as that, Basic Manual informs you with the instructions on frequently used functions.
Step 1: Connections TV Personal computer HDMI IN HDMI OUT HDMI cable To use the ARC function, connect to the ARC compatible HDMI jack of the TV and make an appropriate setting on the unit. See the section 3 "HDMI Setup" of "Step 2: Setting Up". HDMI OUT HDMI OUT HDMI OUT Game console 1 HDMI OUT Set-top box/Digital video recorder, etc. Satellite/Cable set-top box, etc. For how to make settings, see the Advanced Manual.
Step 1: Connections r To play 4K or 1080p video, use the high speed HDMI cable. If your AV component does not have HDMI jack, use an available jack of your component for cable connection with this unit. Just as the HDMI jacks, other jacks on this unit have a preassigned input selector button on the front panel. See the name of the input selector button shown with the jack when connecting the device.
Step 1: Connections 2 2 Front R Connecting speakers 1 Front L 3 Center Important: The power cord must be connected only after all other connections are completed. 12 3 6 45 1 2 Front speakers Center speaker 3 4 5 Surround speakers Subwoofer 6 r The position and size of the speakers is an image. r Only one subwoofer can be connected. r To use the ZONE function, refer to the section 6 "Using the multi-zone function" of "Step 3: Playing Back".
Step 1: Connections cable core to the rear panel of the unit may cause failure. Also do not connect two or more cables to one speaker jack or one speaker to several jacks. 3 Headphones connection Other connections AM/FM antenna connections Connect the antennas to listen to AM/FM broadcast. When listening to the broadcast for the first time, adjust the antenna position and orientation to get the best reception. AM loop antenna (supplied) Indoor FM antenna (supplied) Fix with a tack on the wall.
Step 2: Setting Up 1 Changing speaker configuration Turning the power on 1. After pressing RCV, press HOME on the remote controller. Connect the power cord to the outlet. Press zON/ STANDBY on the main unit or zRECEIVER on the remote controller to turn the unit on or to standby mode. r When the unit is turned on, a large instantaneous current may flow affecting functionality of the computer and other devices.
Step 2: Setting Up Move the cursor with d/c buttons and set the distance from each speaker to the listening position. Press HOME to save the changed setting and close the menu screen. r This setting cannot be changed if headphones are connected or audio is output from the speakers of the TV. r The distance of speakers cannot be changed if "No" or "None" is set for them in "Sp Config". Adjusting volume level of speakers 1. After pressing RCV, press HOME on the remote controller. 2.
Step 3: Playing Back 1 Playing the player and TV Remote controller parts name 1 2 3 1 zRECEIVER button: Turns the unit on or into standby mode. 8 2 RCV button: Switches the remote controller to the mode for operating this unit. 3 REMOTE MODE/INPUT SELECTOR buttons: Switches the input to be played. 9 z To control the unit: The remote controller may be in the remote mode that enables control of other devices. In the state of remote mode, you will not be able to operate this unit.
Step 3: Playing Back Listening modes Select the desired mode by switching and listening actual sound in different modes. The selectable listening modes depend on the format of the input signals. MOVIE/TV: You can select a listening mode suitable for movies and TV programs. MUSIC: You can select a listening mode suitable for music. GAME: You can select a listening mode suitable for games. STEREO: You can select a listening mode for stereo and all channel stereo sources.
Step 3: Playing Back 3 Connecting and playing the Bluetoothenabled device You can wirelessly enjoy music files stored in a smartphone or other Bluetooth-enabled device. The coverage area is |HGGV |OGVGTU r The Bluetooth-enabled device needs to support the A2DP profile. r Note that connection is not always guaranteed with all Bluetooth-enabled devices. Pairing Pairing is necessary when using the Bluetooth-enabled device for the first time.
Step 3: Playing Back 5 Using Quick Setup menu In the Quick Setup menu, you can set frequently used functions including input selection and volume adjustment. 1. Press Q SETUP on the remote controller. The Quick Setup menu is displayed on the connected TV's screen. Quick Setup Input Audio Information Listening Mode 2. Select the item with the cursor buttons of the remote controller and press ENTER to confirm your selection. To return to the previous screen, press RETURN.
Step 3: Playing Back 6 Using the multi-zone function You can listen to the sound in a separate room by making the Zone connection (analog) between the unit and an integrated amplifier placed in the separate room. You can use a Blu-ray Disc player in the main room in which the unit is placed, while receiving AM/FM broadcast in the separate room. Audio can be played in the main room and the separate room simultaneously, or only in the separate room.
1 2 3 4 5 6 7 8 9 F G H I J K (European and Asian models) L M N O Q P R Front Panel 1 zON/STANDBY button: Turns the unit on or into 2 3 4 5 6 7 8 9 standby mode. BLUETOOTH indicator: Flashes while pairing with a Bluetooth-enabled device is in progress and stays lit when pairing is completed. ZONE 2 button: Controls the ZONE function. OFF button: Switches the ZONE function to off. Remote control sensor: Receives signals from the remote controller.
1 2 3 4 6 5 7 1 23 4 9 5 6 7 8 Display 1 Lights in the following conditions. "Z2": ZONE 2 output 8 9 F is on. / "HDMI": HDMI signals are input and HDMI input selector is selected. / "ARC": Audio signals are input from ARC compatible TV and TV/CD input selector is selected. / "3D": Input signals are 3D. / "USB" (¼): "USB" input is selected and USB storage device is connected. / "DIGITAL": Digital signals are input and the digital input selector is selected.
Troubleshooting The remote controller does not work. Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the HDMI linked operation does not work, disconnecting/ connecting the HDMI cable may solve it.
Specifications Amplifier Section Tuner Section HDMI Rated Output Power All channels: 65 watts minimum continuous power per channel, |QJO NQCFU EJCPPGNU FTKXGP HTQO *\ VQ M*\ YKVJ C maximum total harmonic distortion of 0.7% (FTC) 90 watts minimum continuous power per channel, 6 ohm loads, |EJCPPGNU FTKXGP CV M*\ YKVJ C OCZKOWO VQVCN JCTOQPKE distortion of 0.
License and Trademark Information QR Code is a registered trademark of DENSO WAVE INCORPORATED. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. Safari is a trademark or registered trademark of Apple Computer, Inc. in the United States and other countries. “x.v.Color” is a trademark of Sony Corporation. MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. For DTS patents, see http://patents.dts.com.
Precautions For European Models Declaration of Conformity We declare, under our sole responsibility, that this product complies with the standards: – Safety – Limits and methods of measurement of radio disturbance characteristics – Limits for harmonic current emissions – Limitation of voltage changes, voltage fluctuations and flicker – RoHS Directive, 2011/65/EU – Hereby, Onkyo Corporation, declares that this HT-R393 is in compliance with the essential requirements and other relevant provisions of Directive
Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, OSAKA 541-0041, JAPAN http://www.onkyo.com/ The Americas 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. For Dealer, Service, Order and all other Business Inquiries: Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ For Product Support Team Only: 1-800-229-1687 Europe Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4208-213 http://www.eu.onkyo.
