HT-R593 AV RECEIVER Basic Manual Advanced Manual found here http://www.onkyo.com/manual/htr593/adv/en.
Before Start Advanced Manual Advanced Manual is always updated with the latest information and its user friendly interface, which does not matter whether you access from PC or Smartphone, helps you to understand more deeply about the AV Receiver. Advanced Manual is consisted of the following chapters.
Step 1: Connections TV Personal computer I HDMI cable To use the ARC function, connect to the ARC compatible HDMI jack of the TV and make an appropriate setting on the unit. See the section 4 "HDMI Setup" of "Step 2: Setting Up". I Blu-ray Disc/ DVD player I Game console 1 Set-top box/Digital video recorder, etc. Connecting the TV and players Important: The power cord must be connected only after all other connections are completed.
Step 1: Connections ARC compatible TV, and HDMI Through function. See the section 4 "HDMI Setup" of "Step 2: Setting Up". r To play 4K or 1080p video, use the high speed HDMI cable. If your AV component does not have HDMI jack, use an available jack of your component for cable connection with this unit. Just as the HDMI jacks, other jacks on this unit have a preassigned input selector button on the front panel. See the name of the input selector button shown with the jack when connecting the device.
Step 1: Connections 2 Front R Front L Connecting speakers Center Important: The power cord must be connected only after all other connections are completed. 12 3 6 45 1 2 Front speakers Center speaker 3 4 5 Surround speakers Subwoofer 6 r The position and size of the speakers is an image. r Up to two subwoofers can be connected. r To use the multi-zone function, refer to the section 6 "Using the multi-zone function" of "Step 3: Playing Back".
Step 1: Connections Connect LINE INPUT jack on the subwoofer and PRE OUT SUBWOOFER jack on this unit as described in the figure. ¼ Up to two subwoofers can be connected. If the subwoofer has a cut-off filter selection switch, set to DIRECT. If the subwoofer does not have a cut-off filter selection switch but has a cut-off frequency adjusting dial, turn it to the maximum frequency. If your subwoofer does not have built-in power amplifier, you can connect a power amplifier between the unit and the subwoofer.
Step 2: Setting Up 1 1. Place the speaker setup microphone at the Turning the power on measurement position . r Correct measurement will not be possible if the microphone is held by hand. It is desirable that the microphone be placed on a stand at the height of listener's ears. Measurement is not possible if headphones are being used. Connect the power cord to the outlet. Press zON/ STANDBY on the main unit or zRECEIVER on the remote controller to turn the unit on or to standby mode.
Step 2: Setting Up 3. Follow the guidance displayed on the TV screen. You can set up by viewing the guidance displayed on the TV screen. To display the guidance, you need to make HDMI connection between the unit and TV. Select the item with the cursor buttons of the remote controller and press ENTER to confirm your selection. r The subwoofer sound may not be detected since it is extremely low frequencies.
Step 2: Setting Up 3 If the security method of the access point to be connected is WEP, select "Default Key ID", select "OK" and press ENTER. Push Button: Use the automatic setting button of the access point to establish connection. 1 Select "Push Button" with the cursor buttons and press ENTER. 2 Hold down the automatic setting button of the access point for the necessary seconds, select "OK" with the cursor buttons and press ENTER.
Step 3: Playing Back 1 Playing the player and TV 1 zRECEIVER button: Turns the unit on or into standby 1 2 mode. 2 RCV button: Switches the remote controller to the mode for operating this unit. 3 REMOTE MODE/INPUT SELECTOR buttons: Switches 3 8 9 z To control the unit: The remote controller may be in the remote mode that enables control of other devices. In the state of remote mode, you will not be able to operate this unit.
Step 3: Playing Back Listening modes Select the desired mode by switching and listening actual sound in different modes. The selectable listening modes depend on the format of the input signals. MOVIE/TV: You can select a listening mode suitable for movies and TV programs. MUSIC: You can select a listening mode suitable for music. GAME: You can select a listening mode suitable for games. STEREO: You can select a listening mode for stereo and all channel stereo sources.
Step 3: Playing Back 3 Connecting and playing the Bluetoothenabled device You can wirelessly enjoy music files stored in a smartphone or other Bluetooth-enabled device. The coverage area is 48 feet (15 meters). r It may take about a minute until connection is established when the unit is on since the Bluetooth function takes some time to start up. r If the volume setting on the Bluetooth-enabled device is low, the sound will not be output from this unit.
Step 3: Playing Back 5 Using Quick Setup menu In the Quick Setup menu, you can set frequently used functions including input selection and volume adjustment. 1. Press Q SETUP on the remote controller. The Quick Setup menu is displayed on the connected TV's screen. Quick Setup Input Audio Information Listening Mode 2. Select the item with the cursor buttons of the remote controller and press ENTER to confirm your selection. To return to the previous screen, press RETURN.
Step 3: Playing Back 6 Using the multi-zone function You can connect the unit with a pre-main amplifier or speakers in a separate room and playback audio sources from an external device connected to the analog audio input jacks of the unit. And also, you can enjoy sources of "NET", "USB", "BLUETOOTH" as well as AM/FM broadcasting. It is also possible to play the sound from different analog connected devices in the main room and separate room.
1 2 3 4 56 7 8 9 N G H I J K L (Asian model) (Asian model) M F O P Q R S T Front Panel 1 zON/STANDBY button: Turns the unit on or into 2 3 4 5 6 7 8 9 standby mode. BLUETOOTH indicator: Flashes while pairing with a Bluetooth-enabled device is in progress and stays lit when pairing is completed. ZONE 2 button: Controls the multi-zone function. Wi-Fi indicator: Lights when the unit is connected to the wireless LAN router.
1 2 3 4 6 5 7 1 23 4 5 9 6 7 8 Display 1 Lights in the following conditions. "Z2": ZONE 2 output 8 9 F is on. / "HDMI": HDMI signals are input and HDMI input selector is selected. / "ARC": Audio signals are input from ARC compatible TV and TV/CD input selector is selected. / "3D": Input signals are 3D. / "USB" (¼): "USB" input is selected and USB storage device is connected. / "NET" (¼): "NET" input is selected and the unit is connected to the network.
Troubleshooting HDMI control does not function correctly. Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the HDMI linked operation does not work, disconnecting/ connecting the HDMI cable may solve it.
Specifications Amplifier Section Rated Output Power All channels: 65 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.7% (FTC) 90 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.
License and Trademark Information Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. SIRIUS, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. All rights reserved. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together are registered trademarks of DTS, Inc. © DTS, Inc.
Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, OSAKA 541-0041, JAPAN http://www.onkyo.com/ The Americas 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. For Dealer, Service, Order and all other Business Inquiries: Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ For Product Support Team Only: 1-800-229-1687 Europe Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4208-213 http://www.eu.onkyo.
