User Manual

Basic playback
3
3
21
2
31
4
Listening to station presets
You will need to have some presets stored to do this. See
Saving station presets
on page 20 if you haven’t done this
already.
…
Press PRESET +/– to select the station preset you
want.
Naming preset stations
For easier identification, you can name all of your preset
stations.
1
Choose the station preset you want to name.
See Listening to station presets above for how to do this.
2
Press EDIT twice.
The cursor at the first character position is blinking on
the display.
3
Input the name you want.
Choose a name up to eight characters long.
• Use PRESET +/– to select character position.
• Use TUNING +/– to select characters.
• The name is stored when ENTER is pressed.
Tip
• To erase a station name, follow steps 1 and 2, and press
ENTER while the display is blank. Press EDIT while the
display is blank, to keep the previous name.
• Once you have named a station preset, Press DISPLAY
to show the name. When you want to return to the
frequency display, press
DISPLAY several times to show
the frequency.