Manual

Connecting the Speaker Cables

Screw-type speaker terminals

_ trip 1/2" to 5/8" (12 to 15 ram) of

insulation from the ends of the

speaker cables, and twist the bare

wires tightly, as shown. (Supplied

speaker cables are already stripped.)

1/2"_to 5/8"(12 _t° 15 '_mm) _'_ d_d_ "_

Using Banana Plugs (North American models)

• If you are using banana plugs, tighten the speaker terminal before inserting the banana plug.

• Do not insert the speaker code directly into the center hole of the speaker terminal.

Push-type speaker terminals

_ Strip 3/8" to 1/2" (10 to 12 ram) of insulation from the ends of 3/8" to 1/2"(10 to 12 mm)

the speaker cables, and twist the bare wires tightly, as shown. I_1

(Supplied speaker cables are already stripped.) _ c====_"_

The following illustration shows which speaker should be connected to each pair of terminals. If you're using only one

surround back speaker, connect it to the SONN BACK ON FRONT HIGH L terminals.

Surround Surround Surround

back right back left right

speaker speaker speaker

-Tan - Brown - Gray

Front

right

Surround speaker

left

speaker___

- Blue

BUBB BACK OR

FRONT HiGH SPEAKERS

Front

left

speaker

- Red

SURR SPEAKERS

White

Center speaker

Green --/

FRONT SPEAKERS

Front high Front high

right left

speaker speaker

(Optional) (Optional)

Powe red

subwoofer

)

Using the supplied RCA cable, connect the subwoofer's LINE INPUT jack to your AV receiver's SUBWOOFER PRE OUT jack.