Manual

Explanatory Notes
[#fe]iil_Ze]i[:.liJiE(efeIial_Ze]i[:.liJi_[_olllil_1!k_ll
l_lJ]_ffllTl:'Trd
Er3
34
Subwoofer
-_Yes:
elect if a subwoofer is connected.
Select if no subwoofer is connected.
(_) Menu selection
(_) Setting target
@ Setting options (default setting underlined)
If you connect a video component to an HDMI input, you
must assign that input to an input selector. For example, if
you connect your Blu-ray Disc/DVD player to HDMI
IN 2, you must assign "HDMI2" to the "BD/DVD" input
selector.
Here are the default assignments.
Input selector
BD/DVD
VCR/DVR
CBL/SAT
(;AME
AUX
TV/CD
PORT
Default assignment
HDMII
HDMI2
HDMI3
HDMI4
m BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/
CD, PORT
HDMI1, HDMI2, HDMI3, HDMI4:
Select a corresponding HDMI input that the video
component has been connected.
Select if you're not using the HDMI OUT.
Each HDMI input cannot be assigned to two input
selectors or more. When HDMI1 - HDMI4 have
already been assigned, you must set first any unused
input selectors to .... , or you will be unable to
assign HDMI1 - HDMI4 to input selector.
• When all HDMI IN is assigned to an input selector as explained
here, the digital audio input for that input selector is automati-
cally set to thesame HDMIIN(÷ 34, Digital Audio (Digital
Audio Input)).
• If you connect a component (such as UP-AI Dock that seated
iPod) to UNIVERSAL PORT jack, you cannot assign any input
to PORT selector.
• Do not assign the component connected with the HDM[ input to
TV/CD selector when you set "TV Control" setting to "On"
(3 41). Otherwise, appropriate CEC (Consumer Electronics
Control) operation will not be guaranteed.
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2, you must assign "IN2" to
the "BD/DVD" input selector.
Here are the default assignments.
Input selector
BD/DVD
VCR/DVR
CBL/SAT
GAME
AUX
TV/CD
PORT
Default assignment
INI
IN2
N BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/
CD, PORT
IN1, IN2:
Select a corresponding component video input that
the video component has been connected.
Select if you're not using the COMPONENT
VIDEO OUT.
• If you connect a component (such as UP-AI Dock that seated
iPod) to the UNIVERSALPORT jack, youcannot assign any
input to PORT selector.
If you connect a component to a digital audio input, you
must assign that input to an input selector. For example, if
you connect your CD player to the OPTIGAL IN 1, you
must assign "OPTI" to the "TV/CD" input selector.
Here are the default assignments.
Input selector
BD/DVD
VCR/DVR
CBL/SAT
GAME
AUX
TV/CD
PORT
Default assignment
COAXI
COAX2
OPTI
OPT2
N BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/
CD, PORT
COAX1, COAX2, OPT1, OPT2:
Select a corresponding digital audio input that the
component has been connected.
Select if the component is connected to an analog
audio input.