Manual
iii i
Controlling Zone 2 with the Remote
Controller
.............. _ ON/STANDBY
...... ZONE2
_ _._i! --INPUT SELECTOR
...........'. _,,' G- --MUTING
Press ZONE2, and then press ON/STANDBY.
Zone 2 turns on, the ZONE 2 indicator lights.
To select an input source for Zone 2, press
ZONE2, followed by an INPUT SELECTOR.
To select AM or FM press the TUNER input selector
repeatedly.
• You cannot select different AM or FM radio stations for
your main room and Zone 2. The same FM/AM radio sta-
tion will be heard in each room.
To turn off Zone 2, press ZONE2 followed by ON/
STANDBY.
• To control Zone 2, you must press the remote controller's
ZONE2 first.
Adjusting the Volume for Zone 2
m Operating with the remote controller
Press ZONE2.
Use VOL l/V to adjust the volume.
m Operating on the AV receiver
Press ZONE 2 (the ZONE 2 indicator and Zone 2
selector on the display flashes).
Use -/+ within 8 seconds to adjust the volume.
If your Zone 2 speakers are connected to a receiver or inte-
grated amp in Zone 2, use its volume control to adjust the
volume.
Muting Zones
m Operating with the remote controller
Press ZON E2 followed by MUTING.
• To unmute,
• Press ZONE2 followed by MUTING again.
• Only analog input sources are output by the ZONE 2 MNE
OUT and FRONT HIGH OR ZONE2 L/R speaker terminals.
Digital input sources are not output. If no sound is heard when
an input source is selected, check if it's connected to an analog
input.
• While Powered Zone 2 is being used, listening modes that
require surround back and front high speakers (6.117.1), such as
Dolby Pro Logic IIz Height, Dolby Digital EX, and DTS-ES are
unavailable.
• While Zone 2 is on, RI functions will not work.
• You cannot select different AM or FM radio stations for your
main room and Zone 2. The same FM/AM radio station will be
heard in each room. For example, if you have an FM station for
the main room, that station will also be used in Zone 2.
• Zones can also be unmuted by adjusting the volume.
En
46