Speaker System User Manual
Table Of Contents
- A. When the power-supply cord or plug is damaged,
- B. If liquid has been spilled, or objects have fallen into the apparatus,
- C. If the apparatus has been exposed to rain or water,
- D. If the apparatus does not operate normally by following the operating instructions. Adjust onl...
- E. If the apparatus has been dropped or damaged in any way, and
- F. When the apparatus exhibits a distinct change in performance this indicates a need for service.
- Features
- Getting to Know the HTX-22HD
- Remote Controller
- Connecting the Speakers
- Connecting AV Components
- Turning On the HTX-22HD
- First Time Setup
- Playing Your Components
- Using the Listening Modes
- Advanced Setup
- Troubleshooting
- Specifications
30
Turning On the HTX-22HD
Before connecting the power cord, connect all of your speakers and other components.
Notes:
•Turning on the HTX-22HD may cause a momentary power surge that might interfere with
other electrical equipment on the same circuit. If this is a problem, plug the HTX-22HD into
a different branch circuit.
• Do not use a power cord other than the one supplied with the HTX-22HD. The supplied
power cord is designed exclusively for use with the HTX-22HD and should not be used with
any other equipment.
•Never disconnect the power cord from the HTX-22HD while the other end is still plugged
into a wall outlet. Doing so may cause an electric shock. Always disconnect the power cord
from the wall outlet first, and then the HTX-22HD.
Connecting the Power Cord
1
Connect the supplied power cord to the HTX-22HD’s AC INLET.
2
Plug the other end of the power cord into a suitable wall outlet.
The STANDBY indicator lights up.
Power cord varies from
country to country
To wall outlet
Supplied power cord
HTX-22HD_En.book Page 30 Monday, April 7, 2008 2:03 PM