Speaker System User Manual
Table Of Contents
- A. When the power-supply cord or plug is damaged,
- B. If liquid has been spilled, or objects have fallen into the apparatus,
- C. If the apparatus has been exposed to rain or water,
- D. If the apparatus does not operate normally by following the operating instructions. Adjust onl...
- E. If the apparatus has been dropped or damaged in any way, and
- F. When the apparatus exhibits a distinct change in performance this indicates a need for service.
- Features
- Getting to Know the HTX-22HD
- Remote Controller
- Connecting the Speakers
- Connecting AV Components
- Turning On the HTX-22HD
- First Time Setup
- Playing Your Components
- Using the Listening Modes
- Advanced Setup
- Troubleshooting
- Specifications
31
Turning On the HTX-22HD
—Continued
Turning On and Standby
On the HTX-22HD, press the [ON/STANDBY] button.
On the remote controller, press the [ON/STANDBY] button.
The HTX-22HD comes on, the display lights up, and the
STANDBY indicator goes off.
To turn off the HTX-22HD, press the [ON/STANDBY] button,
or press the remote controller’s [ON/STANDBY] button. The
HTX-22HD will enter Standby mode. To prevent any loud sur-
prises the next time you turn on the HTX-22HD, turn down the
volume before you turn it off.
ON/STANDBY
ON/STANDBY
STANDBY indicator
Remote
controller
HTX-22HD
or
What’s Next?
If you’re using the HTX-22HD for the very first time, here’s a few settings that you need to
make. These settings only need to be made once.
■ Do the automatic speaker setup—this is essential!
See “Automatic Speaker Setup (Audyssey 2EQ)” on page 32.
■ Assign input jacks to input selectors
See “Audio Input Setup” on page 36.
■ Did you connect any HDMI components?
If you did, see “HDMI Input Setup” on page 37.
■ Did you connect an -capable Onkyo MiniDisc recorder, CD recorder, or RI Dock
to the LINE 1 or LINE 2 input?
If you did, see “Audio Input Setup” on page 36 and “Changing the Input Display” on
page 38.
HTX-22HD_En.book Page 31 Monday, April 7, 2008 2:03 PM