Speaker System User Manual
Table Of Contents
- A. When the power-supply cord or plug is damaged,
- B. If liquid has been spilled, or objects have fallen into the apparatus,
- C. If the apparatus has been exposed to rain or water,
- D. If the apparatus does not operate normally by following the operating instructions. Adjust onl...
- E. If the apparatus has been dropped or damaged in any way, and
- F. When the apparatus exhibits a distinct change in performance this indicates a need for service.
- Features
- Getting to Know the HTX-22HD
- Remote Controller
- Connecting the Speakers
- Connecting AV Components
- Turning On the HTX-22HD
- First Time Setup
- Playing Your Components
- Using the Listening Modes
- Advanced Setup
- Troubleshooting
- Specifications
36
First Time Setup
—Continued
When you connect a component to an analog
or digital input, you must assign that input to
an input selector. For example, if you connect
your DVD player to OPTICAL IN 1, you
must assign OPTICAL IN 1 to the DVD input
selector.
Here are the default assignments.
Audio Input Setup
Input selector Audio input
DVD OPT1
VCR/DVR HDMI1
CBL/SAT HDMI2
GAME/TV OPT2
TAPE LINE1
TUNER LINE2
CD COAX
1
Press the [SETUP] button.
ENTER
SETUP
2
Use the Up and Down [ ]/[ ]
buttons to select “1.Input
Assign,” and then press
[ENTER].
3
Use the Up and Down [ ]/[ ]
buttons to select “Audio Input,”
and then press [ENTER].
4
Use the Up and Down [ ]/[ ]
buttons to select an input
selector, and then use the Left
and Right [ ]/[ ] buttons to
select:
COAX
:Select if the component
is connected to the COAXIAL
DIGITAL IN.
OPT1
:Select if the component is
connected to the OPTICAL
DIGITAL IN 1.
OPT2
:Select if the component is
connected to the OPTICAL
DIGITAL IN 2.
LINE1
:Select if the component
is connected to the LINE 1
INPUT.
LINE2
:Select if the component
is connected to the LINE 2
INPUT.
- - - - -:
Select if you’re not using
the input selector.
HTX-22HD_En.book Page 36 Monday, April 7, 2008 2:03 PM