Speaker System User Manual
Table Of Contents
- A. When the power-supply cord or plug is damaged,
- B. If liquid has been spilled, or objects have fallen into the apparatus,
- C. If the apparatus has been exposed to rain or water,
- D. If the apparatus does not operate normally by following the operating instructions. Adjust onl...
- E. If the apparatus has been dropped or damaged in any way, and
- F. When the apparatus exhibits a distinct change in performance this indicates a need for service.
- Features
- Getting to Know the HTX-22HD
- Remote Controller
- Connecting the Speakers
- Connecting AV Components
- Turning On the HTX-22HD
- First Time Setup
- Playing Your Components
- Using the Listening Modes
- Advanced Setup
- Troubleshooting
- Specifications
52
Using the Listening Modes
—Continued
With the Audio Adjust settings, you can
adjust the sound and listening modes as you
like.
Multiplex/Mono
Multiplex
■
Input (Mux)
This setting determines which channel of a
stereo multiplex source is output. Use it to
select audio channels or languages with mul-
tiplex sources, multilingual TV broadcasts,
and so on.
Main:
The main channel is output (default).
Sub:
The sub channel is output.
M/S:
Both the main and sub channels are
output.
Mono
■
Input (Mono)
This setting determines which channel is out-
put when the Mono listening mode is used
with a stereo source.
L+R:
Both the left and right channels are
output (default).
L:
Only the left channel is output.
R:
Only the right channel is output.
Using the Audio Adjust Settings
1
Press the [SETUP] button.
2
Use the Up and Down [ ]/[ ]
buttons to select “3. Audio
Adjust,” and then press
[ENTER].
3
Use the Up and Down [ ]/[ ]
buttons to select an item, and
then press [ENTER].
ENTER
SETUP
4
Use the Up and Down [ ]/[ ]
buttons to select an option,
and use the Left and Right
[ ]/[ ] buttons to change it.
The Audio Adjust menu items
are explained below.
5
When you’ve finished, press
the [SETUP] button.
Setup closes.
HTX-22HD_En.book Page 52 Monday, April 7, 2008 2:03 PM