Speaker System User Manual

58
Advanced Setup —Continued
Crossover Frequency
This setting only applies to the speakers that
you specified as Small in the “Speaker Con-
figuration” on page 56.
To get the best bass performance from your
speaker system, you need to set the crossover
frequency according to the size and frequency
response of your speakers
Notes:
•For a more accurate setting, look up the
frequency response in the manuals supplied
with your speakers and set accordingly.
• Choose a higher crossover frequency if you
want more sound from your subwoofer.
9
Press the Down [ ] button to
select “Xover” (Crossover) and
then use the Left and Right
[ ]/[ ] buttons to select a
crossover frequency.
Use the diameter of the smallest
speaker in your system when
choosing the crossover fre-
quency.
ENTER
SETUP
This setting is set automatically by the
Automatic Speaker Setup function (see
page 32).
* Choose the setting suitable for
the speaker.
Continue with step 10 of the
“Double Bass” setting on the
next page.
Speaker cone
diameter
Crossover
frequency
Over 8 in.
(20 cm)
40/50/60Hz*
6-1/2 to 8 in.
(16–20 cm)
80Hz
5-1/4 to 6-1/2 in.
(13–16 cm)
100Hz
3-1/2 to 5-1/4 in.
(9–13 cm)
120Hz
Under 3-1/2 in.
(9 cm)
150Hz (default)/
200Hz*
HTX-22HD_En.book Page 58 Monday, April 7, 2008 2:03 PM