Speaker System User Manual
Table Of Contents
- A. When the power-supply cord or plug is damaged,
- B. If liquid has been spilled, or objects have fallen into the apparatus,
- C. If the apparatus has been exposed to rain or water,
- D. If the apparatus does not operate normally by following the operating instructions. Adjust onl...
- E. If the apparatus has been dropped or damaged in any way, and
- F. When the apparatus exhibits a distinct change in performance this indicates a need for service.
- Features
- Getting to Know the HTX-22HD
- Remote Controller
- Connecting the Speakers
- Connecting AV Components
- Turning On the HTX-22HD
- First Time Setup
- Playing Your Components
- Using the Listening Modes
- Advanced Setup
- Troubleshooting
- Specifications
62
Advanced Setup
—Continued
Equalizer Settings
With the Equalizer settings, you can adjust
the tone of each speaker.
1
Press the [SETUP] button.
2
Use the Up and Down [ ]/[ ]
buttons to select “2. Speaker
Setup,” and then press
[ENTER].
3
Use the Up and Down [ ]/[ ]
buttons to select “Equalizer,”
and then press [ENTER].
ENTER
SETUP
These settings are set automatically by
the Automatic Speaker Setup function
(see page 32).
4
Use the Left and Right [ ]/[ ]
buttons to select:
Off:
Tone off, response flat.
Audyssey:
The tone for each
speaker is set automatically
by the Automatic Speaker
Setup function. Be sure to
select this setting after hav-
ing performed the Automatic
Speaker Setup. This option
is available only if the Auto-
matic Speaker Setup func-
tion has been run.
Manual:
You can adjust the
equalizer for each speaker
manually.
If you selected Manual, continue
with this procedure. If you
selected Off or Audyssey, pro-
ceed to step 8.
5
Press the Down [ ] button,
and then use the Left and Right
[ ]/[ ] buttons to select a
speaker.
You can adjust the EQ for the
following speakers:
Front:
Front left and right
speakers.
Center:
Center speaker.
Surround:
Surround left and
right speakers.
SurrBack:
Surround back left
and right speakers.
Subwoofer:
This subwoofer.
Speakers that you set to No or
None in the “Speaker Configura-
tion” on page 56 cannot be
selected.
HTX-22HD_En.book Page 62 Monday, April 7, 2008 2:03 PM