Contents Living Speaker System Before Use .........................2 LS3100 Sound System Controller (LAP-301) Front Speakers (SLM-301) Wireless Subwoofer (SLW-301) Connections ....................14 Operations .......................17 Instruction Manual Useful Function...............21 Appendix..........................22 Thank you for purchasing an Onkyo product. Please read this manual thoroughly before making connections and plugging in your new Onkyo product.
Before Use WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
16. Object and Liquid Entry Never push objects of any kind into the apparatus through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus. Don’t put candles or other burning objects on top of this unit. 17.
7. 8. Never Touch this Unit with Wet Hands— Never handle this unit or its power cord while your hands are wet or damp. If water or any other liquid gets inside this unit, have it checked by your Onkyo dealer. Handling Notes • If you need to transport this unit, use the original packaging to pack it how it was when you originally bought it. • Do not leave rubber or plastic items on this unit for a long time, because they may leave marks on the case.
Modèle pour les Canadien IMPORTANT REMARQUE: The plug is fitted with an appropriate fuse. If the fuse needs to be replaced, the replacement fuse must approved by ASTA or BSI to BS1362 and have the same ampere rating as that indicated on the plug. Check for the ASTA mark or the BSI mark on the body of the fuse. If the power cord’s plug is not suitable for your socket outlets, cut it off and fit a suitable plug. Fit a suitable fuse in the plug.
Con la presente Onkyo Corporation dichiara che questo LAP-301 è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Ar šo Onkyo Corporation deklarē, ka LAP-301 atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem. Šiuo Onkyo Corporation deklaruoja, kad šis LAP-301 atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Package Contents Make sure you have the following items: Sound system controller (LAP-301) Remote controller (RC-858S) Subwoofer • Wireless Design for Free Setting and Powerful Sound • Powered Bass Reflex Design • 6-1/2 inch (16 cm) Cone AC adapter and Power cord*1 (➔ page 16) Stereo mini plug cable 5 ft. (1.5 m) Front Speakers Optical digital audio cable 5 ft. (1.5 m) Front speakers (SLM-301) Speaker stand × 2 Speaker cable 10 ft. (3.
■ Using the Remote Controller ■ Replacing the Battery Use only a battery of the same type (CR2025). Pull out firmly in the direction of the arrow pressing the tab in the direction of the arrow. Remove the plastic film before using the remote controller. To use the remote controller, point it at the controller’s remote control sensor, as shown below. (Placing on the floor, etc.) LAP-301 Push Pull Back side Positive ⊕ side Remote control sensor Approx. 16ft.
Getting to Know the LS3100 Top Panel (LAP-301) a b c d e f For detailed information, see the pages in parentheses. a 8ON/STANDBY button (17) d Volume –/+ buttons (17) b ON/STANDBY LED (17) e c Remote control sensor (8) f Bluetooth LED (17) /TV input button (17) Rear Panel (LAP-301) a a DC IN jack b SPEAKER OUT terminals b c d c AUDIO IN (TV) DIGITAL OPTICAL and COAXIAL jacks d AUDIO IN (TV) ANALOG audio jack See “Connections” for connection (➔ pages 14 to 16).
Front Speakers (SLM-301) Remote Controller Cabinet a e b (Front) Slit for stand (Side) c Speaker terminals d Hole for eye bolt f (Rear) Caution • The front grilles are not designed to be removed so do not attempt to remove them forcibly, as this will damage them. For detailed information, see the pages in parentheses.
Placement This section explains how to mount/place the controller, the front speaker and the subwoofer. In this instruction manual, Sound System Controller (LAP-301) is described as “controller”. a b 5-11/16" (145 mm) Screw Keyhole slots for wall mounting c Bottom of the LAP-301 Tip • The controller can be mounted upside-down.
Mounting/Placing the Front Speakers Front speaker can be placed on the table top or mounted to the wall by using supplied stands. ■ Attaching the stand Insert the stand into the stand slit on the rear of the front speaker. (Table top) Slit for stand ■ Using the rubber stoppers for a more stable platform We recommend to use the supplied rubber stoppers to achieve the best possible sound. Attach the rubber stoppers to the four corners of the bottom. The rubber stopper also provides stability.
■ Wall mounting 1 Attach the supplied stand referring to the illustration for wall mounting. 2 Screw a commercially available wallmounting screw into the wall. 3 Insert the head of the screw into the keyhole slot on the bottom of the supplied stand and fix it firmly. Please confirm that the head of the screw is at the top of the hole. ■ Fixing the front speakers to prevent a falling accident When you mount the speaker to the wall, make sure to set it firmly so that it cannot slip and fall.
Connections Connections Connecting the Front Speakers Connect the supplied front speaker. Connect positive (+) terminal of the front speaker to positive (+) terminal of the controller (LAP-301) and negative (-) terminal of the front speaker to negative (-) terminal of the controller. Front right speaker Front left speaker Supplied speaker cable Speaker Connection Precautions Read the following before connecting your speakers: • You can connect speakers with an impedance of between 4 and 8 ohms.
■ 1/8" (3.5 mm) Stereo mini plug This cable carries analog audio. Using the Subwoofer Corner position 1/3 of wall position To find the best position for your subwoofer, while playing a movie or some music with good bass, experiment by placing your subwoofer at various positions within the room, and choose the one that provides the most satisfying results. Note • The controller’s optical digital jack has a shuttertype cover that open when an optical plug is inserted and close when it’s removed.
Connecting the Power cord (LAP-301) 1 Connect the supplied AC adapter and the power cord. 2 1 3 To AC wall outlet 2 Insert the plug of the AC adapter into DC IN. 3 Plug the AC adapter into an AC wall outlet. (SLW-301) 1 Connect the supplied power cord for subwoofer to AC INLET. 1 2 To AC wall outlet Note • The shape of the AC INLET differs depending on the country. 2 En 16 Plug the power cord into an AC wall outlet.
Operations Operations Enjoying the sound ■ Operating with the remote controller / INPUT 1 2 Turn on the connected TV. 3 4 To adjust the volume, use VOLUME +/–. VOLUME +/- SOUND MODE SUBWOOFER +/- Press INPUT to select the TV selector. See also: • “Listening to an audio from Bluetooth device” (➔ page 19) Select a sound mode and enjoy! See also: • “Using the Sound Modes” (➔ page 19) ■ Operating on the controller 8ON/STANDBY ON/STANDBY LED Volume –/+ Turn on the connected TV.
Adjusting the Subwoofer Level 1 Press SUBWOOFER +/– on the remote controller. You can adjust the volume of subwoofer while listening to an input source. Adjust the volume by 1 step in the –10 to 10 range. The default is 0. Muting the controller You can temporarily mute the output of the controller. Setting the Auto Power On This function switches between standby mode and ready mode.
About the Auto Standby function The controller will automatically enter standby mode if there is no audio input for five minutes. When Auto Power On is set to on, the controller will enter ready mode. Using the Sound Modes Listening to an audio from Bluetooth device Note • If your mobile phone supports A2DP protocol, its music will play through the controller. 1 Selecting Sound Modes You can switch the sound mode only with the remote controller.
Tip • If you press and hold the /TV input button on the top panel or INPUT on the remote controller for three seconds with Bluetooth selector selected, the Bluetooth connection to the Bluetooth-enabled device is interrupted and start the pairing. Note • If there is no sound output even after the paring is done successfully, consult the user manual of the Bluetooth-enabled device, and then select the “Onkyo LS3100” as the audio output device.
Useful Function Programming the controller for use of existing remote controller The controller can be operated with your existing TV remote controller or any other remote controller by programming the controller. This section explains how to program the controller to operate ON/STANDBY function on the controller by pressing the 5 (number button) on your TV remote controller as an example. This operation can be done only from the top panel.
Appendix Troubleshooting If you have any trouble using the controller, look for a solution in this section. If you can’t resolve the issue yourself, contact your Onkyo dealer. Power ■ Can’t turn on the controller Make sure that the power cord is properly plugged into the wall outlet. — Unplug the power cord from the wall outlet, wait 10 seconds or more, then plug it in again. — If you can’t resolve the issue yourself, try resetting the controller before contacting your Onkyo dealer.
Audio Remote Controller ■ There’s no sound, or it’s very quiet ■ The remote controller doesn’t work Make sure that all audio connecting plugs are pushed in all the way. 15 Make sure that the battery is installed with the correct polarity. Make sure that the input of TV is connected properly. 15 Make sure that the remote controller is 8 not too far away from the controller, and that there’s no obstruction between the remote controller and the controller’s remote control sensor.
Others ■ Standby power consumption When the Auto Power On function is set — to “on”, the power consumption in ready mode may reach up to a maximum of 4 W. ■ Pairing the controller and the subwoofer Turn on the controller before performing a pairing. 1 2 Press and hold LINK on the rear panel of the subwoofer for five seconds. Flashing speed of the LINK LED is changed. Press and hold 8ON/STANDBY on the controller for three seconds until the ON/STANDBY LED flashes white.
Specifications Controller (LAP-301) Rated Output Power All channels: (North American) 20 watts minimum continuous power per channel, 4 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.8% (FTC) (Others) 2 ch × 20 W at 4 ohms, 1 kHz, 2 ch driven of 0.8% (IEC) Maximum Effective Output Power (Australian) 2 ch × 22 W at 4 ohms, 1 kHz, 2 ch driven (JEITA) THD+N (Total Harmonic Distortion+Noise) 0.8% (Power Rated) 0.
Subwoofer (SLW-301) Rated Output Power (FTC) (North American) 50 watts minimum continuous power, 4 ohms, driven at 100 Hz with a maximum total harmonic distortion of 1% Rated Output Power (IEC) (Others) 50 watts minimum continuous power, 4 ohms, driven at 100 Hz with a maximum total harmonic distortion of 1% Play Frequency Band 40 Hz - 200 Hz (DIRECT) Cabinet capacity 11.5 L (0.41 cubic feet) Dimensions (W × H × D) 261 mm × 337 mm × 269 mm 10-1/4" × 13-1/4" × 10-9/16" (incl. grille and projection) Weight 5.
Memo En 27
2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8163 http://www.onkyo.com/ 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 800-229-1687, 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4208-213 http://www.eu.onkyo.