Instruction manual

25
En
Specifications
■ Audio Inputs
■ Audio Output
■ Others
Controller (LAP-301)
Rated Output Power
All channels: (North American)
20 watts minimum continuous
power per channel, 4 ohm loads,
2 channels driven at 1 kHz, with a
maximum total harmonic
distortion of 0.8% (FTC)
(Others)
2 ch × 20 W at 4 ohms, 1 kHz,
2 ch driven of 0.8% (IEC)
Maximum Effective Output Power
(Australian)
2 ch × 22 W at 4 ohms, 1 kHz,
2 ch driven (JEITA)
THD+N (Total Harmonic Distortion+Noise)
0.8% (Power Rated)
0.2% (1 kHz, 1 W)
Damping Factor 20 (Front, 1 kHz, 8 Ω)
Input Sensitivity and Impedance (Unbalance)
200 mV/47 kΩ (LINE)
Frequency Response
50 Hz - 20 kHz/+3 dB, –3 dB
(DIGITAL)
Signal to Noise Ratio
93 dB (DIGITAL, IHF-A)
Speaker Impedance
4 Ω - 8 Ω
Power Supply (North American)
AC 120 V, 60 Hz
(European) AC 230 V, 50 Hz
(Others) AC 220 - 240 V, 50/60 Hz
Power Consumption
*
Listed on a label on the bottom
17.8 W
No-sound Power Consumption
(North American and European)
6W
(Others) 6.1 W
Stand-by Power Consumption
(North American) 0.38 W
(European) 0.46 W
(Others) 0.47 W
Dimensions (W × H × D)
187 mm × 32 mm × 120 mm
7-3/8" × 1-1/4" × 4-3/4"
Weight 0.3 kg (0.7 lbs.)
Digital Optical: 1 Coaxial: 1
Analog Stereo Input
ø 3.5 mm mini
Speaker Output SPEAKER OUT
Wireless Subwoofer
1
Front Speaker (SLM-301)
Type Full Range Closed Box
Impedance 4 Ω
Maximum input power
20 W
Output sound pressure level
86 dB/W/m
Frequency Response
200 Hz - 20 kHz
Cabinet capacity 0.6 L (0.021 cubic feet)
Dimensions (W × H × D)
169 mm × 78 mm × 108 mm
6-5/8" × 4-3/8" × 5-1/4"
(incl. grille and projection)
Weight 0.7 kg (1.5 lbs)
Drivers unit 6.5 cm (2-1/2") cone
Terminal Spring type
Other Non magnetic shielding