LS-T30_mst.book 1 ページ ２０１４年８月２１日 木曜日 午後１時５分 LS-T30 Control Reference Guide........... 4 TV Speaker System Placement ................................. 7 Instruction Manual Connecting to a TV.................... 8 Listening to TV .......................... 9 Using a TV Remote Controller.............. 11 Playing via Bluetooth Connection .............. 12 Troubleshooting....................... 13 Supplied Accessories .............. 15 Thank you for purchasing an Onkyo product.
LS-T30_mst.book 2 ページ ２０１４年８月２１日 木曜日 午後１時５分 Safety precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
LS-T30_mst.book 3 ページ ２０１４年８月２１日 木曜日 午後１時５分 Safety precautions - Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada licenceexempt RSS standard(s).
LS-T30_mst.book 4 ページ ２０１４年８月２１日 木曜日 午後１時５分 Control Reference Guide Main unit INPUT button: Switches the input source. Each time the button is pressed, input modes are switched in order of TV# USB (North American models) # Bluetooth # .... Status indicators: Displays the sound mode, volume, and subwoofer level. Right channel speaker * Also, switches the power on/standby. Press and hold for approximately 3 seconds to place the device into Standby. Press once to turn the power on.
LS-T30_mst.book 5 ページ ２０１４年８月２１日 木曜日 午後１時５分 Control Reference Guide Rear of the unit (terminals) OPTICAL jack: Makes a digital connection to the TV with the supplied optical digital audio cable. are used depending on the audio outputs available on your TV. COAXIAL jack: Makes a digital connection to the TV using a coaxial cable (sold separately). USB port: (North American models) Connects a USB flash memory. (Others) This port is used for service purposes only. Do not use it.
LS-T30_mst.book 6 ページ ２０１４年８月２１日 木曜日 午後１時５分 Control Reference Guide North American models Others Remote controller This manual outlines procedures using the remote controller. ON/STANDBY button: Switches the power on/standby. SUBWOOFER i/j buttons: Adjust the subwoofer level. SOUND MODE button: Use this button to select the desired sound mode for the playback audio. INPUT buttons: Switches the input source.
LS-T30_mst.book 7 ページ ２０１４年８月２１日 木曜日 午後１時５分 Placement 1. Affix the cushioning pads to the bottom of the TV stand. Using the supplied cushions will allow you to limit the effect of vibrations on the TV. The illustration shows an example of placement. Mount the unit on a firm surface such as the top of a low board. Also, subwoofer is located on the bottom side of the unit. Please take extra care on setting. TVs meeting the following requirements may be placed on the unit. 0 Weight: 60 kg (132.
LS-T30_mst.book 8 ページ ２０１４年８月２１日 木曜日 午後１時５分 Connecting to a TV If there is the OPTICAL jack on the TV being used (illustrated above) If there is no OPTICAL jack on the TV being used Make a digital connection to the TV with the supplied optical digital audio cable. Connect the AC adapter/power cord into the DC IN on the unit, and then connect the other end of the power cord into an electrical outlet. Connect either of the following.
LS-T30_mst.book 9 ページ ２０１４年８月２１日 木曜日 午後１時５分 Listening to TV Basic operations To adjust the subwoofer level 1. Turn on the TV. Auto Power On is turned on by default, and so power to the unit turns on automatically. The input source automatically switches to TV, and audio from the TV is played. 0 The input source switches to TV, and the input source indicator lights in white. Allows to adjust the subwoofer level by 1 step in the j10 to i10 range while listening to the sound. The default setting is 0.
LS-T30_mst.book 10 ページ ２０１４年８月２１日 木曜日 午後１時５分 Listening to TV Change the desired sound quality (SOUND MODE) You can switch the sound mode of input sound as desired. 1. Press SOUND MODE button. The sound modes are switched in the following order each time this button is pressed. The status indicator lights (orange) indicate the current mode. (Standard) Play files with a good balance from low through to high frequencies. This is the standard mode with neutral settings.
LS-T30_mst.book 11 ページ ２０１４年８月２１日 木曜日 午後１時５分 Using a TV Remote Controller Preprogrammed feature The unit has been preprogrammed so that the unit can be operated using your TV remote controller. Volume control and muting(*) operations can be performed with this feature. If you want to use other functions or cannot operate the unit with your TV remote controller, you can use the learning function (described below) to enable these features. 2.
LS-T30_mst.book 12 ページ ２０１４年８月２１日 木曜日 午後１時５分 Playing via Bluetooth Connection Approx.10 m (33 ft) You can wirelessly enjoy music files stored in a smartphone or other Bluetooth-enabled device. The coverage area is 10 meters (33 feet). Pairing Pairing is necessary when using the Bluetooth-enabled device for the first time. Before starting the procedure, learn how to enable the Bluetooth setting function and to connect with other devices on the Bluetooth-enabled device. 1. Press to turn on the unit. 2.
LS-T30_mst.book 13 ページ ２０１４年８月２１日 木曜日 午後１時５分 Troubleshooting There’s no sound, or it’s too small Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device. ∫ Resetting the unit Resetting the unit to the status at the time of shipment may solve the problem.
LS-T30_mst.book 14 ページ ２０１４年８月２１日 木曜日 午後１時５分 Specifications Rated Output Power (FTC): Front speaker: (North American) 12.5 W minimum continuous power per channel, 4 ohm loads, 2 channel driven at 1 kHz, with a maximum total harmonic distortion of 1% Subwoofer: (North American) 25 W minimum continuous power, 4 ohm loads, 1 channel driven at 80 Hz, with a maximum total harmonic distortion of 1% Rated Output Power (IEC): Front speaker: (Others) 2chk12.
LS-T30_mst.book 15 ページ ２０１４年８月２１日 木曜日 午後１時５分 Supplied Accessories Make sure you have the following items before use. 0 The number in parenthesis indicates the quantity. 0 In catalogs and on packaging, the letter at the end of the product name indicates the color. AC adapter (1) Power cord (1) Remote controller (1) RC-894S (North American models) RC-895S (Others) Optical digital audio cable 1.5 m (5 ft.) (1) Ø 3.
LS-T30_mst.book 16 ページ ２０１４年８月２１日 木曜日 午後１時５分 Onkyo Corporation Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, OSAKA 541-0041, JAPAN http://www.onkyo.com/ The Americas Onkyo U.S.A. Corporation 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. For Dealer, Service, Order and all other Business Inquiries: Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ For Product Support Team Only: 1-800-229-1687 http://www.us.onkyo.
