Instruction manual
Listening to TV
10
Change the desired sound quality 
(SOUND MODE)
You can switch the sound mode of input sound 
as desired.
1. Press  SOUND MODE button.
The sound modes are switched in the 
following order each time this button is 
pressed. The status indicator lights (orange) 
indicate the current mode.
(Standard)
Play files with a good balance from low 
through to high frequencies. This is the 
standard mode with neutral settings.
(Surround)
Creates a richer sound field, provides 
realistic sound movement and amplifies 
bass sounds. Ideal for watching movies.
(Stereo)
Suitable for listening to music. Playback 
music with pure quality similar to the 
original sound.
(Voice)
Play files with voice clearly. Ideal when 
watching the news or documentary 
programmes.
Switch audio in sound-multiplex 
programmes
This can be set only when the audio signal is 
Dolby Digital. Press and hold the SOUND 
MODE button on the remote controller for 
approximately 3 seconds. Pressing and holding 
switches the source in the following order.
Main: The input indicator (white) flashes 
once.
Secondary: The input indicator (white) 
flashes twice.
MainiSecondary: The input indicator 
(white) flashes three times.
Auto Standby function:
If there is no audio input and no operation of 
the unit has been performed for some time, 
the power will automatically enter standby 
mode as Auto Standby is on by default. The 
time taken to enter standby mode depends 
on the connected cables or the input source.
0 Connecting with the optical digital audio 
cable or coaxial cable: 2 hours 
(5 minutes when power to the TV is off)
0 Connecting with the stereo mini plug 
cable: 5 minutes
0 Bluetooth/USB (North American models): 
5 minutes
To cancel this function, press and hold   on 
the unit, and then press and hold   while 
continuing to press
  . The input source 
indicator flashes twice (white) to indicate that 
this setting is now off.
0 Repeating this procedure switches 
between on/off. The indicator flashes 
once to indicate that this setting is now 
on.
LS-T30_mst.book 10 ページ  2014年8月21日 木曜日 午後1時5分










