Wireless Headphone User’s Manual MHP-AV1(WT-1+WR-1) 1
Acknowledgment & Trademark Manufactured under license from Dolby Laboratories “Dolby”, “Dolby Digital”, “Dolby Pro Logic”, and the Double – D symbol are trademarks of Dolby Laboratories. FCC Compliance Statement The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation.
In case of insurance claim, please make sure to record the Model Number and Serial Number printed on the real panel of the cabinet. The space below is provided for you to record the information. Model Number : _______________________________ Serial Number :________________________________ Purchase Date : ________________________________ Dealer Name : _________________________________ Introduction Using a sophisticated room modeling techniques, the Juster Wireless Dolby Headphone combines the 5.
Safety Voltage Chart : Use the following chart to find out the correct power voltage in your country : Input Voltage AC 100-120V AC 230V Frequency 50-60Hz 50 Hz Area North America/ Taiwan/Japan Europe/UK Description of Parts Front panel of Transmitter Base Headphone Indicator Dts Indicator Dolby Pro Logic II Indicator Standby Indicator AAC Indicator Dobly Digital Indicator Charger Indicator 4
Back Panel Left Sound Jack Digital Coaxial Analog Input Right Sound Jack Optical Input Optical Output Adapter Input 1. Analog/Optical Input - Input for either Digital or Analog signal source 2. Decode mode indicator for Dolby Pro Logic II & Left 2 channel indicator in Noise Test mode 3. Indicator for Dolby Headphone or Stereo Headphone mode & Center channel indicator in Noise Test mode 10 4. Decode mode indicator for Dolby Digital & Right channel indicator in Noise Test mode 5.
Back Panel Left Sound Jack Analog Input Right Sound Jack Digital Coaxial Optical Input Optical Output Adapter Input Side Panel RCA SW Mode Digital/Analog SW Mode Digital/Coaxial SW Mode Dolby Headphone Chanel Selector Connection Chart 1. Digital Input a. Use associate optical cable to connect the optical signal output device and decoder b.
2. Charge -Plug in the battery charger for battery charge 3. Battery Insert ٛ .a. Remove the cover of battery case ٛ .b. Insert the fully charged batteries with correct pole direction ٛ .c. Put back the cover ٛ.
