PR-SC5530 AV CONTROLLER Basic Manual Advanced Manual found here http://www.onkyo.com/manual/prsc5530/adv/en.
Before Start About the Basic Manual Features This unit works as an AV controller when connected with a separately sold multichannel power amplifier. The Basic Manual leads you through the initial procedure to enjoy various sources with the AV controller, describing how to make settings and connections, and how to use popular functions.
Step 1: Connections TV Personal computer HDMI IN HDMI OUT To use the ARC function, connect to the ARC compatible HDMI jack of the TV and make an appropriate setting on the unit. See "2nd Step : Source Connection" of "Step 2: Setting Up". HDMI cable HDMI OUT HDMI OUT HDMI OUT Game console 1 HDMI OUT Set-top box/Digital video recorder, etc. Blu-ray Disc/DVD player Satellite/Cable set-top box, etc. For how to make settings, see the Advanced Manual.
Step 1: Connections the section 6 "Using the multi-zone function" of "Step 3: Playing Back". The unit supports the HDMI Through function that allows transmission from players to the TV even if the unit is in standby. You have to modify the settings to enable the input selection link with CEC compliant device, connection with ARC compatible TV, and HDMI Through function. See the section 2 "2nd Step : Source Connection" of "Step 2: Setting Up". r To enjoy HDCP2.
Step 1: Connections 2 back speakers need to be installed. r Although Height 1 speakers can enhance surround effects, we recommend you to add Height 2 speakers in order to ensure full effects. r Install Height speakers such as Front High and Rear High speakers on the upper part of the front or rear wall. There are other types of Height speakers.
Step 1: Connections Ceiling speakers, etc. are used for maximizing effects in Dolby Atmos or Dolby Surround listening mode. Install Top Front speakers midway between the position just above the listening position and the position just above the front speakers. Install Top Middle speakers just above the listening position. Install Top Rear speakers midway between the position just above the listening position and the position just above the surround back speakers.
Step 1: Connections Connecting a subwoofer with built-in power amplifier PUSH The maximum four units of two systems of subwoofer with built-in power amplifier can be connected to this unit. Use the SW1/2 PRE OUT RCA jack or SUBWOOFER 1/2 PRE OUT XLR jack according to the input jack of your subwoofer. You can also set the level and distance of the connected subwoofer. r If your subwoofer does not have built-in power amplifier, you can connect a power amplifier between the unit and the subwoofer.
Step 1: Connections 3 Network connection Other connections AM/FM antenna connections Connect the antennas to listen to AM/FM broadcast. When listening to the broadcast for the first time, adjust the antenna position and orientation to get the best reception. You can enjoy Internet radio and DLNA by connecting the unit to LAN. The unit can be connected to the router with an Ethernet cable or to the wireless LAN router with WiFi connection.
Step 2: Setting Up Important: When the unit is turned on for the first time, the setup wizard of the section 2 will automatically be launched. If you use the setup wizard to make the initial setup, connect a TV to the HDMI OUT MAIN or SUB jack of the unit via HDMI connection. 1 Turning the power on Connect the power cord to the outlet. Press zON/ STANDBY on the main unit or zRECEIVER on the remote controller to turn the unit on or to standby mode.
Step 2: Setting Up 2. After placing the microphone at the measurement position, select "Do it Now" with the cursors and press ENTER. 3. Connect the microphone to the SETUP MIC jack of the unit. SETUP MIC jack Speaker setup microphone 4. Follow the guidance displayed on the TV screen. AccuEQ Room Calibration Front Speakers Type Normal Height 1 Speakers Type Not Use Height 2 Speakers Type Not Use 6. When the measurement is completed, the measurement result is displayed.
Step 2: Setting Up "Yes" with the cursors and press ENTER on the remote controller. Follow the guidance to select the desired REMOTE MODE button and in the keyboard screen, enter the first three characters of the brand name of the device you are going to program (e.g., "ONK" for ONKYO) and search for the remote control code. The guidance will also explain how to set the remote controller. 2. Select and set the authentication method.
Step 3: Playing Back 1 Playing the player and TV 2 RED RECEIVER SOURCE ZONE 3 GREEN 1 SLEEP 7 8 Remote controller parts name 1 zRECEIVER button: Turns the unit on or into standby mode.
Step 3: Playing Back Listening modes You can select a listening mode from various options such as Dolby Digital, Dolby Atmos and DTS. Select the desired mode by switching and listening actual sound in different modes. The selectable listening modes depend on the format of the input signals. MOVIE/TV: You can select a listening mode suitable for movies and TV programs. MUSIC: You can select a listening mode suitable for music. GAME: You can select a listening mode suitable for games.
Step 3: Playing Back r The SCMS-T content protection method is supported. A Bluetooth-enabled device compatible with the SCMS-T content protection method can be played. r Note that connection is not always guaranteed with all Bluetooth-enabled devices. Pairing Pairing is necessary when using the Bluetooth-enabled device for the first time. Before starting the procedure, learn how to enable the Bluetooth setting function and to connect with other devices on the Bluetooth-enabled device.
Step 3: Playing Back 5 Using Quick Setup menu In the Quick Setup menu, you can set frequently used functions including input selection and volume adjustment. 1. Press Q SETUP on the remote controller. The Quick Setup menu is displayed on the connected TV's screen. CBL/SAT Input BD DVD Audio CBL/SAT Video STB DVR Information GAME Listening Mode PC AUX 2. Select the item with the cursor buttons of the remote controller and press ENTER to confirm your selection.
Step 3: Playing Back 6 Using the multi-zone function The function allows you to connect the unit with a TV or audio equipment placed in a separate room so that you can enjoy audio and video of the connected equipment even if you are staying in a different room. It is possible to perform playback in the main room and a separate room at the same time, for example by playing the Blu-ray Disc player in the main room where the unit is placed while playing Internet radio in a separate room.
Step 3: Playing Back Listening to Music in a Separate Room Performing Multi-zone Playback c. Connecting an integrated amplifier in a separate room 1. Press ZONE on the remote controller several times to It is possible to play 2 ch source in a separate room while 11.2 ch source is being played in the main room. Connect the PRE/LINE OUT ZONE2 jacks or PRE/LINE OUT ZONE3 jacks of the unit and the line-in jacks of the integrated amplifier in a separate room with an RCA cable. select Zone 2 or Zone 3.
1 2 3 456 7 8 9 F (European and Asian models) G H I J K L M N O PQ R S T U V W X Front Panel 1 zON/STANDBY button: Turns the unit on or into 2 3 4 5 6 7 standby mode. PURE AUDIO button and indicator: Switches to the PURE AUDIO mode. Remote control sensor: Receives signals from the remote controller. BLUETOOTH indicator: Flashes while pairing with a Bluetooth-enabled device is in progress and stays lit when pairing is completed.
P DIMMER button (North American model): Switches Q R S T U V W X the brightness of the display. RT/PTY/TP button (European and Asian models): Can be used when receiving the station transmitting text information. MEMORY button: Registers or deletes a station. TUNING MODE button: Switches the tuning mode. USB port: A USB storage device is connected so that music files stored in it can be played. LISTENING MODE buttons: Allows you to select the listening mode.
3 1 2 PUSH J K L 4 5 6 89 7 F 4 G H I PUSH M N O P Rear Panel 1 DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio signals are input. 2 RI REMOTE CONTROL jack: An Onkyo product with RI jack can be connected and synchronized with this unit. 3 ETHERNET port: Used for LAN connection 4 Wireless antenna: Used for Wi-Fi connection or when using a Bluetooth-enabled device. Adjust their angles according to the connection status.
Troubleshooting Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the HDMI linked operation does not work, disconnecting/connecting the HDMI cable may solve it.
Specifications Amplifier Section Bluetooth Section r 8KFGQ +PRWVU THD+N (Total Harmonic Distortion+Noise) 0.08% (20 Hz - 20 kHz, half power) Input Sensitivity and Impedance (Unbalance) O8 Mŝ .
License and Trademark Information DISCLAIMER Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround, Surround EX and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS-HD Master Audio and DTS Neo:X | 11.1 are trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.
Precautions For European Models – – Declaration of Conformity We declare, under our sole responsibility, that this product complies with the standards: – Safety – Limits and methods of measurement of radio disturbance characteristics – Limits for harmonic current emissions – Limitation of voltage changes, voltage fluctuations and flicker – RoHS Directive, 2011/65/EU – Hereby, Onkyo Corporation, declares that this PR-SC5530 is in compliance with the essential requirements and other relevant provisions of D
