Operation Manual

33
Installation and Connections
Connecting AV Components —Continued
For USA and Canadian models, this type of connection is only possible if an option board that has an appropriate
terminal is installed.
• When connecting a DVD player to the RDC-7.1, make connections for video and audio signals using digital and
analog terminals. Before making connections, refer to pages 30, 31 for correct connections.
• When you want to perform analog recording of the audio signal from a DVD player or operate your -compatible
IntegraRESEARCH products via connections with the RDC-7.1, you have to make analog audio signal connec-
tions. Connect the audio output terminals on the DVD player to the AUDIO IN terminals on the RDC-7.1 using ana-
log audio cables (RCA/phono).
• This section shows the connection example when you use the default settings of the RDC-7.1. However, you can
connect a DVD player to other terminals within the same terminal section on the RDC-7.1. In such case, remember
to configure the audio input assignment in the Audio Assign sub-menu (See page 98) and the video input assignment
in the Video Assign sub-menu (See page 99).
• For a model without a HDMI terminal, when you connect a DVD player to the COMPONENT terminals, be sure to
use the COMPONENT terminal to connect a TV or projector.
*For more information on the HDMI interface, see page 43.
*For more information on the i.LINK (AUDIO) interface, see page 40.
Connecting a DVD Player
LL
(
SINGLE
)
(
ASSIGNABLE
) (
ASSIGNABLE
)
REMOTE
CONTROL
“Net
-
Tune”
is a trademark of
Onkyo Corporation.
ETHERNET
(
Net
-
Tune
)
22
11
66
55
44
33
22
1 1
C D
DIGITAL IN DIGITAL IN
OPTICAL COAXIAL
OUT
SBR SBL
SR SL
SUB C
FR
FL
E
MULTI
-
CH
IN 1
DIGITAL IN
(
BALANCED
)
AES/ EBU
DIGITAL IN
(
BALANCED
)
AES/ EBU
AUDIO IN
1
3
2
1
PH
2
3
9
8
7
6
5
4
4
5
LR RL
GND
OUT
LR
LR
R L
F
G
L
IN 1
IN 2
OUT
HDMI
S VIDEO VIDEO
IN IN
IN
1
IN 2
3
2
1
Y
PB
PR
COMPONENT
VIDEO
IN 3
IH
6
5
4
Y
P
B
PR
2
1
4
3
S VIDEOS VIDEO VIDEOVIDEO
OUT OUT
OUT 1
J
OUT
(
HD/ BNC
)
Y
P
B
P R
Y
P
B
P R
COMPONENT VIDEO
IN
(
HD/ BNC
)
K
ANTENNA
FM
75
AM
A
C
B
MAIN
12V
TRIGGER
OUT
IR
UPP
D
E
200mA MAX.
100mA MAX.
100mA MAX.
100mA MAX.
100mA MAX.
ZONE 2
ZONE
3
LL
AC INLET
(
SINGLE
)
A B
RS 232
OUT
IN
Y
P
B
PR
COMPONENT
OUT (RCA)
R
L
R
L
VIDEO
OUT
FRONT SURR
SURR BACK ANALOG
CENTER
SUB
WOOFER
S VIDEO
OUT
DIGITAL
AUDIO OUT
AUDIO OUTMULTICH OUT
OPTICAL
HDMI
OUT
When connecting to other audio terminals
within the same terminal section, configure
the audio input settings accordingly using the
Audio Assign sub-menu (See page 98).
When connecting to other video terminals
within the same terminal section, configure
the video input settings accordingly using the
Video Assign sub-menu (See page 99).
DVD player
Audio Output Video Output