DOCK MUSIC SYSTEM SBX-200 Instruction Manual
Thank you for purchasing an Onkyo product. Please read this manual carefully before making any connections or using this product. By following these instructions, you’ll get the best audio performance and the most listening pleasure from your Onkyo product. Keep this manual for future reference. Important Safety Instructions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
E. If the apparatus has been dropped or damaged in any way, and F. When the apparatus exhibits a distinct change in performance this indicates a need for service. 16. Object and Liquid Entry Never push objects of any kind into the apparatus through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus.
• This unit’s top and rear panels may get warm after prolonged use. This is normal. • If you do not use this unit for a long time, it may not work properly the next time you turn it on, so be sure to use it occasionally. • When you’ve finished using this unit, remove all discs and turn off the power. 9. Installing this Unit • Install this unit in a well-ventilated location. • Ensure that there’s adequate ventilation all around this unit, especially if it’s installed in an audio rack.
iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. “Made for iPod”, “Made for iPhone” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
CAUTION Contents - Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: Front: No obstructions and open spacing. Sides / Top / Back: No obstructions should be placed in the areas shown by the dimensions below. Bottom: Place on a flat and stable surface. Front View: 15 cm 15 cm 15 cm Side View: 15 cm Back side 15 cm Front side 15 cm Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing/Replacing the Batteries Getting Started CAUTION Package Contents Examine whether the following package contents are all included: Main Unit Remote Control AC Adapter Power Cord Cushion for iPad A Lithium Coin Battery CR2025 is loaded on the remote control at the factory. Using the Remote Control ME NU Battery-protect sheet IN PU T EN TE R Remove the battery-protect sheet before use. S-BA SS MUT IN VO G LU M E Danger of explosion if battery is incorrectly replaced.
NOTE System Overview If you are not going to use the remote control for a long time, remove the battery to avoid any damage that may be caused by leakage and corrosion. Front Panel Connecting the AC Adapter WARNING Only use the AC adapter provided with the unit. Ensure that power supply outlet matches with the unit AC’s input 100-240V, 50/60Hz before connection. 1 2 Insert the AC Adapter into DC IN jack of the unit.
Side Panel Remote Control 1. 1. ON/STANDBY button 2. INPUT button Toggle among iPod, Bluetooth and LINE IN modes. 3. VOLUME buttons Hold to increase or decrease the volume. 4. S.BASS button Activate super bass 1 or super bass 2 sound effect. 5. PAIRING button Build a Bluetooth connection with a Bluetooth-enable device. 6. LINE IN jack For connecting an external audio device with using a stereo mini (not supplied). (On/Standby) button Switch between standby mode and power-on mode. 2.
Playing back from iPod 2 Set your iPod on the tray. Make sure the connector plug of unit is firmly inserted into the connector port of iPod. iPod/iPhone/iPad NOTE When you use the iPad, attach the cushion for iPad (included). INPUT button iPod Connector Store the cushion in a place where children cannot reach. If a child accidentally swallows the cushion, consult a doctor immediately.
NOTE When placing or removing the iPod, hold the iPod at the same angle as that of the connector on this unit, and do not twist or bend the iPod as connector damage may result. Do not carry the unit with an iPod set on the docking tray. Doing so may cause a malfunction. When placing or removing the iPod, hold the docking tray securely. Before disconnecting the iPod, pause playback. If the battery of your iPod is extremely low, charge it for a while before operation.
Playing Back via Bluetooth 3 Downloading the App We have developed an App to give you full control from your iPad/ iPhone/iPod touch while playing audio over the Bluetooth wireless connection, please download the App for FREE. Supported OS version: 4.0 or higher Press the PAIRING button on the unit to put the unit into the pairing mode. The pair indicator starts blinking at a fast rate.
NOTE If there is no sound output even after the paring is done successfully, consult the user manual of the Bluetooth-enabled device, and then select the “SBX-200” as the audio output device. CAUTION iPod may not output the sound when you press INPUT to change the mode to iPod mode while iPod, already placed on the Docking Tray, is connected to Bluetooth. (The White source indicator turns on.
Troubleshooting The unit does not work. Press Reset button which is placed Reset button inside the Reset engraved thin hole on the bottom of this unit using such as a slender rod. Unplug the Power Cord from the Bottom of unit wall outlet, wait 10 seconds or more, then plug it in again. Press the INPUT button repeatedly to switch LINE IN mode (the source indicator lit Green), and press and hold the (Repeat) button on the remote control during the power is ON. The unit is suddenly powered off.
Specification General Rated output Power (IEC): Power Supply: Power Consumption: No-sound Power Consumption: Stand-by Power Consumption: Dimensions: Weight: Analogue Input: Amplifi er Total Harmonic Distortion+N: Damping Factor: Input Sensitivity/ Impedance: Frequency Response: Tone Control Characteristies: Signal to Noise Ratio: Speakers Speaker Impedance: Speaker Outputs: Type: Unit: 2ch ×20 W at 6 ohms, 1kHz, 2chDriven of 1 % . AC 100 – 240 V, 50/60 Hz 27 W Bluetooth Version: Profile: 2.
2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8163 http://www.onkyo.com/ 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 800-229-1687, 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.eu.onkyo.