TX-NR1030 AV RECEIVER Basic Manual Advanced Manual found here http://www.onkyo.com/manual/txnr1030/adv/en.
Before Start Advanced Manual Advanced Manual is always updated with the latest information and its user friendly interface, which does not matter whether you access from PC or Smartphone, helps you to understand more deeply about the AV Receiver. Advanced Manual is consisted of the following chapters.
Step 1: Connections TV Personal computer HDMI IN HDMI OUT To use the ARC function, connect to the ARC compatible HDMI jack of the TV and make an appropriate setting on the unit. See "2nd Step : Source Connection" of "Step 2: Setting Up". HDMI cable HDMI OUT HDMI OUT HDMI OUT Game console 1 HDMI OUT Blu-ray Disc/DVD player Satellite/Cable set-top box, etc. Set-top box/Digital video recorder, etc. For how to make settings, see the Advanced Manual.
Step 1: Connections The unit supports the HDMI Through function that allows transmission from players to the TV even if the unit is in standby. You have to modify the settings to enable the input selection link with CEC compliant device, connection with ARC compatible TV, and HDMI Through function. See "2nd Step : Source Connection" of "Step 2: Setting Up". r To enjoy HDCP2.2 protected video, connect the player to the IN3 jack and the TV to the HDMI OUT MAIN jack of the unit.
Step 1: Connections 2 back speakers need to be installed. r Although Height 1 speakers can enhance surround effects, we recommend you to add Height 2 speakers in order to ensure full effects. r Install Height speakers such as Front High and Rear High speakers on the upper part of the front or rear wall. There are other types of Height speakers.
Step 1: Connections Installing speakers in ceiling k i g gh ij kl 5 Surround R 8 Surround back R l j h 4 Surround L If you use only one surround back speaker, connect it to the BACK L terminal. Top Front Top Middle Top Rear Ceiling speakers, etc. are used for maximizing effects in Dolby Atmos or Dolby Surround listening mode. Install Top Front speakers midway between the position just above the listening position and the position just above the front speakers.
Step 1: Connections 1/2"-5/8"(12-15 mm) Assemble the AM loop antenna (supplied). Cut and remove the plastic coating from the end of the speaker cable, twist the core and connect it to the terminal. Make correct connection between the unit's jacks and speaker's jacks (+ to + and - to -) for each channel. If connection is wrong, a bass sound may become poor due to reverse phase.
Step 2: Setting Up Important: When the unit is turned on for the first time, the setup wizard of the section 2 will automatically be launched. If you use the setup wizard to make the initial setup, connect a TV to the HDMI OUT MAIN or SUB jack of the unit via HDMI connection. 1 Turning the power on Connect the power cord to the outlet. Press zON/ STANDBY on the main unit or zRECEIVER on the remote controller to turn the unit on or to standby mode.
Step 2: Setting Up 2. After placing the microphone at the measurement position, select "Do it Now" with the cursors and press ENTER. 3. Connect the microphone to the SETUP MIC jack of the unit. Press W/X on the remote controller to check the settings. Press ENTER with "Save" selected. In the next screen showing that "AccuEQ Room Calibration" is "On", press ENTER on the remote controller. r If there is an error message, follow the on-screen instruction to remove the error cause.
Step 2: Setting Up 4th Step : Network Connection Wi-Fi Setup Select the authentication method. does not stay lit, connection has not been established. Make the setting again. If "Push Button" does not work, try "Enter Password". Initial Setup Network Connection Do you want to connect network connection? It gives you network services that our AV receiver support. If you wish to skip this step. Enter Password select “No. Skip”. Push Button PIN code Yes No.
Step 3: Playing Back 1 Playing the player and TV 2 RED RECEIVER SOURCE ZONE 3 GREEN 1 SLEEP 7 8 Remote Controller Parts Name 1 zRECEIVER button: Turns the unit on or into standby mode.
Step 3: Playing Back Listening Modes You can select a listening mode from various options such as Dolby Digital, Dolby Atmos and DTS. Select the desired mode by switching and listening actual sound in different modes. The selectable listening modes depend on the format of the input signals. MOVIE/TV: You can select a listening mode suitable for movies and TV programs. MUSIC: You can select a listening mode suitable for music. GAME: You can select a listening mode suitable for games.
Step 3: Playing Back 3 Connecting and playing the Bluetoothenabled device You can wirelessly enjoy music files stored in a smartphone or other Bluetooth-enabled device. The coverage area is |HGGV |OGVGTU Playing Sound of the Bluetooth-enabled Device If the unit is on and the Bluetooth-enabled device is connected, the input will be automatically switched to BLUETOOTH. Play music in this state.
Step 3: Playing Back Network Service: Select to use Internet radio services and the DLNA function. When you connect the unit to the network and press ENTER, the network service screen will be displayed on the TV. On the TV screen, select the desired service or music file with the cursors of the remote controller and press ENTER to confirm and start playback. Internet radio service: You can listen to TuneIn or such other Internet radio stations registered in advance.
Step 3: Playing Back Screen Centered Dialog: Height speakers are used to move acoustic images such as dialogs from the center speakers upward according to the height of the TV screen. Acoustic images of the center speakers move up as the set value is increased. r This item may not be available depending on the selected listening mode. r This function cannot be used if headphones are connected. r This function cannot be used if "Height 1 Speakers Type" is not set to "Front High".
Step 3: Playing Back 6 Using the multi-zone function The function allows you to connect the unit with a TV or audio equipment placed in a separate room so that you can enjoy audio and video of the connected equipment even if you are staying in a different room. It is possible to perform playback in the main room and a separate room at the same time, for example by playing the Blu-ray Disc player in the main room where the unit is placed while playing Internet radio in a separate room.
Step 3: Playing Back To turn off the multi-zone function: Press ZONE on the remote controller repeatedly to select Zone 2 or Zone 3. Press zRECEIVER. To control on the main unit, press ZONE2 or ZONE3 and within 8 seconds, press OFF. Listening to Music in a Separate Room c. Connecting an Integrated Amplifier in a Separate Room It is possible to play 2 ch source in a separate room while 9.2 ch source is being played in the main room.
1 2 3 456 7 8 9 F (European model) G H I J K L M N O PQ R S T U V W X Front Panel 1 zON/STANDBY button: Turns the unit on or into 2 3 4 5 6 7 standby mode. PURE AUDIO button and indicator: Switches to the Pure Audio mode. Remote control sensor: Receives signals from the remote controller. BLUETOOTH indicator: Flashes while pairing with a Bluetooth-enabled device is in progress and stays lit when pairing is completed.
P DIMMER button (North American models): Switches Q R S T U V W X the brightness of the display. RT/PTY/TP button (European model): Can be used when receiving the station transmitting text information. MEMORY button: Registers or deletes a station. TUNING MODE button: Switches the tuning mode. USB port: A USB storage device is connected so that music files stored in it can be played. LISTENING MODE buttons: Allows you to select the listening mode.
3 1 2 4 5 K L J 6 7 M 89 F 4 N G H I O P Rear Panel 1 DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio signals are input. 2 RI REMOTE CONTROL jack: An Onkyo product with RI jack can be connected and synchronized with this unit. 3 ETHERNET port: Used for LAN connection 4 Wireless antenna: Used for Wi-Fi connection or when using a Bluetooth-enabled device. Adjust their angles according to the connection status.
Troubleshooting Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the HDMI linked operation does not work, disconnecting/connecting the HDMI cable may solve it.
Specifications Amplifier Section Network Section Rated Output Power All channels: 135 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.
License and Trademark Information DISCLAIMER Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround, Surround EX and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS-HD Master Audio and DTS Neo:X | 11.1 are trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.
Precautions – For European Models – Declaration of Conformity We declare, under our sole responsibility, that this product complies with the standards: – Safety – Limits and methods of measurement of radio disturbance characteristics – Limits for harmonic current emissions – Limitation of voltage changes, voltage fluctuations and flicker – RoHS Directive, 2011/65/EU – Hereby, Onkyo Corporation, declares that this TX-NR1030 is in compliance with the essential requirements and other relevant provisions of
Support for Spotify Connect Spotify Connect can be supported by updating the unit's firmware. Simply click the Connect icon and select the unit on the playback screen of Spotify application to enjoy high quality music streaming. To enable Spotify Connect, install the Spotify application on your smartphone or tablet first. Then, create a Spotify premium account. The Spotify software is subject to third party licenses found here: ¼ www.spotify.
Unterstützung für Spotify Connect Spotify Connect kann durch Aktualisierung der Firmware des Geräts unterstützt werden. Klicken Sie einfach auf das Symbol Connect und wählen Sie das Gerät auf dem Wiedergabe-Bildschirm der Anwendung Spotify, um hochqualitatives Musik-Streaming zu genießen. Zur Aktivierung von Spotify Connect, installieren Sie die Anwendung Spotify zuerst auf Ihrem Smartphone oder Tablet. Erstellen Sie dann einen Spotify Premium-Account.