Owner's Manual

53
> Network Functions > Specifications > Advanced Setup > Listening Modes
Troubleshooting Supplementary Information, etc�|
> Basic Manual
■ Images flicker
•
It is possible that the resolution of the player is not
compatible with the TV's resolution. If you have
connected the player to this unit with an HDMI cable, try
changing the output resolution on the player. There also
may be an improvement if you change the screen mode
on the TV.
■ Video and audio are out of synch
•
Video may be delayed relative to audio depending on
the settings and connections with your television. To
adjust, press Q on the remote controller, and adjust in
"Other" - "A/V Sync" in the "Quick Menu".
Linked operation
■ There is no linked operation with CEC compliant
devices, such as a TV�
•
In the Setup menu of the unit, set "Hardware" - "HDMI" -
"HDMI CEC" to "On".
•
It is also necessary to set HDMI linking on the CEC
compliant device. Check the instruction manual.
Tuner
■ Radio reception is poor or there is a lot of noise�
•
Re-check the antenna connection.
•
Relocate your antenna.
•
Move the unit away from your TV or PC.
•
Passing cars and airplanes can cause interference.
•
Concrete walls weaken radio signals.
•
Listen to the station in mono.
•
When listening to an AM station, operating the remote
controller may cause noise.
•
FM reception may become clearer if you use the
antenna jack on the wall used for the TV.
BLUETOOTH function
•
Try plugging/unplugging the power of the unit and try
turning on/off the BLUETOOTH wireless technology
enabled device. Re-startup of the BLUETOOTH
wireless technology enabled device may be effective.
•
The BLUETOOTH wireless technology enabled devices
must support the A2DP profile.
•
Near components such as microwave oven or cordless
phone, which use the radio wave in the 2.4 GHz range,
a radio wave interference may occur, which disables the
use of this unit.
•
If there is a metallic object near the unit, BLUETOOTH
connection may not be possible as the metal can effect
on the radio waves.
Check the following if the above does not fix the problem:
■ Cannot connect with this unit
•
Check that the BLUETOOTH function of the
BLUETOOTH wireless technology enabled device is
enabled.
■ Music playback is unavailable on the unit even after
successful BLUETOOTH connection
•
When the audio volume of your BLUETOOTH wireless
technology enabled device is set low, the playback of
audio may be unavailable. Volume up the BLUETOOTH
wireless technology enabled device.
•
Depending on the BLUETOOTH wireless technology
enabled device, Send/Receive selector switch may be
provided. Select Send mode.
•
Depending on the characteristics or specifications of
your BLUETOOTH wireless technology enabled device,
playback on the unit is not guaranteed.
■ Sound is interrupted
•
Problem may be occurring at the BLUETOOTH wireless
technology enabled device. Check the information on
the internet.
■ The audio quality is poor after connection with a
BLUETOOTH wireless technology enabled device
•
The BLUETOOTH reception is poor. Move the
BLUETOOTH wireless technology enabled device