SN29402768A_TX-NR676_676E_BAS_En_171107.book 1 ページ 2017年11月6日 月曜日 午後12時51分 TX-NR676 / TX-NR676E / AV RECEIVER Before Start ..................................................................... 2 What's in the box............................................................... 2 Part Names ...................................................................... 3 Part Names ....................................................................... 3 Install .....................................................
SN29402768A_TX-NR676_676E_BAS_En_171107.book 2 ページ > Before Start > Part Names 2017年11月6日 > Install 月曜日 午後12時51分 > Initial Setup > Playback What's in the box 1. Main unit (1) 2. Remote controller (RC-911R) (1), Batteries (AAA/R03) (2) 3. Speaker setup microphone (1) 0 Used during Initial Setup. 4. Indoor FM antenna (1) 5. AM loop antenna (1) 6.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 3 ページ > Before Start > Part Names 2017年11月6日 > Install 月曜日 午後12時51分 > Initial Setup > Playback (*)You can find details in the Advanced Manual. Part Names Front Panel 1. Í ON/STANDBY button 2. MUSIC OPTIMIZER button/indicator (North American models): Turns on/off the Music Optimizer function that provides better sound quality for compressed audio.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 4 ページ > Before Start > Part Names 2017年11月6日 月曜日 > Install 午後12時51分 > Initial Setup > Playback (*)You can find details in the Advanced Manual. 14.You can adjust the sound quality of the front speakers. Press the TONE button (above) repeatedly to select the item to adjust from "Bass" and "Treble", and turn the TONE dial (below) to adjust. 15.PHONES jack: Headphones with a standard plug (Ø1/4"/6.3 mm) are connected. 16.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 5 ページ > Before Start > Part Names 2017年11月6日 月曜日 > Install 午後12時51分 > Initial Setup > Playback (*)You can find details in the Advanced Manual. 90° 180° (Taiwanese models) Rear Panel 1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable. 2. TUNER AM/FM 75Ω terminal: The supplied antennas are connected. 3.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 6 ページ > Before Start 2017年11月6日 > Part Names > Install 月曜日 午後12時51分 > Initial Setup > Playback (*)You can find details in the Advanced Manual. 15.SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each of the SUBWOOFER PRE OUT jacks. Remote Controller Tips 6 1. Í ON/STANDBY button 2.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 7 ページ > Before Start 2017年11月6日 > Part Names > Install 月曜日 午後12時51分 > Initial Setup > Playback Installation procedure This unit can be used in a number of ways, depending on the layout of the speakers you are installing, and the connections made to external devices. Read the following to help make the installation process smoother.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 8 ページ > Before Start > Part Names 2017年11月6日 > Install 月曜日 午後12時51分 > Initial Setup > Playback Step1: Speaker Layout 7.1 Channel System *1 *2 *3 ½1: 22e to 30e, ½2: 90e to 110e, ½3: 135e to 150e 8 Front speakers output front stereo sound and a center speaker outputs center sound such as dialogs and vocals. Surround speakers create back sound field. Powered subwoofer reproduces bass sounds and creates rich sound field. This basic 5.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 9 ページ > Before Start > Part Names 2017年11月6日 > Install 月曜日 午後12時51分 > Initial Setup > Playback 5.1.2 Channel System-1 (Front High Speakers/Rear High Speakers) This is a basic 5.1 channel system consisting of front speakers, a center speaker, surround speakers, and a powered subwoofer, with the addition of front height speakers or rear high speakers, which are both types of height speakers.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 10 ページ > Before Start > Part Names 2017年11月6日 > Install 月曜日 午後12時51分 > Initial Setup > Playback 5.1.2 Channel System-2 (Ceiling Speakers) *3 *2 *1 This is a basic 5.1 channel system consisting of front speakers, a center speaker, surround speakers, and a powered subwoofer, with the addition of top front speakers, top middle speakers, or top rear speakers, which are types of height speakers.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 11 ページ > Before Start > Part Names 2017年11月6日 > Install 月曜日 午後12時51分 > Initial Setup > Playback 5.1.2 Channel System-3 (Dolby Enabled Speakers (Dolby Speakers)) *1 *2 This is a basic 5.1 channel system consisting of front speakers, a center speaker, surround speakers, and a powered subwoofer, with the addition of Dolby enabled speakers (front) or Dolby enabled speakers (surround), which are both types of height speakers.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 12 ページ > Before Start > Part Names 2017年11月6日 > Install 月曜日 午後12時51分 > Initial Setup > Playback Bi-Amping the Speakers With a 5.1 channel system, it is possible to connect front speakers that support Bi-Amping to improve the quality of the bass and treble.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 13 ページ > Before Start > Part Names 2017年11月6日 > Install 月曜日 午後12時51分 > Initial Setup > Playback Speaker combinations 0 In any of the combinations, up to two powered subwoofers can be connected. Speaker Channels FRONT CENTER SURROUND SURROUND BACK ZONE 2 HEIGHT Bi-AMP (ZONE SPEAKER) (P20) 2.1 ch (*1) (*1) 3.1 ch (*1) (*1) 4.1 ch (*1) (*1) 5.1 ch (*1) (*1) 6.1 ch (*2) 7.1 ch (*2) 2.1.2 ch (*3) 3.1.2 ch (*3) 4.1.2 ch (*3) 5.1.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 14 ページ > Before Start > Part Names 2017年11月6日 月曜日 > Install 午後12時51分 > Initial Setup > Playback Step2: Connect the Speakers Standard Connections (Pages 8 to 11) Up to two powered subwoofers can be connected. The same signal is output from each of the SUBWOOFER PRE OUT jacks. 1/2˝ (12 mm) Setup 0 Settings for the speaker configuration you have connected need to be made in "1. AccuEQ Room Calibration" in Initial Setup (P22).
SN29402768A_TX-NR676_676E_BAS_En_171107.book 15 ページ > Before Start > Part Names 2017年11月6日 月曜日 > Install 午後12時51分 > Initial Setup > Playback Connecting with Bi-Amping Speakers (Page 12) Make sure you remove the jumper bar fitted between the woofer jacks and tweeter jacks of the front speakers. Refer to "Standard Connections (Pages 8 to 11)" (P14) to connect the center speaker, surround speakers, and powered subwoofer.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 16 ページ > Before Start 2017年11月6日 > Part Names > Install 月曜日 午後12時51分 > Initial Setup > Playback Step3: Connect the TV & AV Components 1. Connect the TV To ARC TV For a TV that supports the ARC (Audio Return Channel) (*1) feature, use an HDMI cable and connect according to illustration "a". Choose an HDMI IN jack on the TV that supports ARC when connecting. *2 Setup 0 Settings are required to use the ARC function. Select "Yes" in "5.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 17 ページ > Before Start > Part Names 2017年11月6日 > Install 月曜日 午後12時51分 > Initial Setup > Playback 2. Connect the HDMI AV Component This is an example of connection with an AV component that has an HDMI jack.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 18 ページ > Before Start > Part Names 2017年11月6日 月曜日 > Install 午後12時51分 > Initial Setup > Playback 3. Connect the Non-HDMI AV Component This is an example of connection with an AV component that does not have an HDMI jack. Make the connections to the AV component to match the jacks it has.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 19 ページ > Before Start > Part Names 2017年11月6日 > Install 月曜日 午後12時51分 > Initial Setup > Playback 4. Connect the Audio Component Example of a connection with an audio component. Connect a CD player using a digital optical cable or analog audio cable. You can also connect a turntable that has an MM-type cartridge to the PHONO jack. 0 If the turntable has a built-in audio equalizer, connect it to another AUDIO IN jack.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 20 ページ > Before Start 2017年11月6日 > Part Names > Install 月曜日 午後12時51分 > Initial Setup > Playback 5. Multi-zone Connection You can enjoy audio in the separate room by, for example, playing a Blu-ray Disc player in the main room (where this unit is located) and listening to internet radio in the separate room (ZONE 2). 0 DSD and Dolby TrueHD audio signals are not output to ZONE 2 when selected with the "NET" input selector.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 21 ページ > Before Start > Part Names 2017年11月6日 > Install 月曜日 午後12時51分 > Initial Setup > Playback 6. Connect Other Cables Antenna Hookup Move the antenna around while playing the radio to find the position with the best reception. Use a thumb tack or similar to attach the indoor FM antenna to a wall. a Network Hookup d Connect this unit to the network using wired LAN or Wi-Fi (wireless LAN).
SN29402768A_TX-NR676_676E_BAS_En_171107.book 22 ページ > Before Start > Part Names 2017年11月6日 > Install 月曜日 午後12時51分 > Initial Setup > Playback Initial Setup with Auto Start-up Wizard Initial Setup Starts Automatically 1 INPUT TV When you turn the unit on for the first time after purchasing it, Initial Setup is automatically shown on the TV to enable you to make settings required for startup using simple operations following onscreen guidance. 1.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 23 ページ > Before Start > Part Names 2017年11月6日 > Install The speakers emit the test tone at high volume during measurement, so be careful of your surroundings. Keep the room as quiet as possible during measurement. 0 If you have connected a subwoofer, check the power and volume of the subwoofer. Set the subwoofer volume to more than halfway.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 24 ページ > Before Start 2017年11月6日 > Part Names > Install 月曜日 午後12時51分 > Initial Setup BLUETOOTH® Playback AV Component Playback Playback 1 > Playback 2 1 2 3 INPUT Onkyo TX-NR676 XXX TV Basic Operations You can play the audio from AV components such as Blu-ray Disc players through this unit. 0 When a TV is connected to the HDMI OUT SUB jack, press Q (P6) on the remote controller and use "Other" "HDMI Out" to switch between MAIN and SUB.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 25 ページ > Before Start > Part Names 2017年11月6日 > Install 月曜日 午後12時51分 > Initial Setup > Playback Network Functions 1 2 3 INPUT TV Basic Operations By connecting this unit to the network you can enjoy internet radio services such as TuneIn, streaming from Spotify Connect, and wireless playback using AirPlay® features.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 26 ページ > Before Start > Part Names 2017年11月6日 > Install 月曜日 午後12時51分 > Initial Setup > Playback USB Storage Device 1 2 3 4 INPUT TV Basic Operations You can play music files stored on a USB storage device. Perform the following procedure when the unit is on. 1. Switch the input on the TV to that assigned to the unit. 2. Plug your USB storage device with the music files into the USB port of this unit’s rear panel. 3.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 27 ページ > Before Start > Part Names 2017年11月6日 > Install 月曜日 午後12時51分 > Initial Setup > Playback Listening to the AM/FM Radio 1 You can receive AM and FM radio stations on this unit with the built-in tuner. Perform the following procedure when the unit is on. ∫ Tuning into a Radio Station Tuning Automatically 1. Press TUNER (a) on the remote controller repeatedly to select either "AM" or "FM" on the display. 2.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 28 ページ > Before Start > Part Names 1 2 2017年11月6日 > Install 月曜日 午後12時51分 > Initial Setup 3 > Playback ∫ Using RDS (European, Australian and Asian models) RDS stands for Radio Data System and is a method of transmitting data in FM radio signals. In regions using RDS, the radio station name is displayed when you tune into a radio station broadcasting program information.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 29 ページ > Before Start > Part Names 2017年11月6日 > Install 月曜日 午後12時51分 > Initial Setup > Playback Multi-zone 1 2 3 will also switch the playback mode to the same setting. To return the remote controller to main room control mode: While holding down MODE on the remote controller, press MAIN (c) for 3 seconds or more until the remote indicator flashes once.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 30 ページ > Before Start 2017年11月6日 > Part Names > Install 月曜日 午後12時51分 > Initial Setup > Playback Listening Mode This unit is equipped with a variety of listening modes, and you can select the optimum listening mode for movies, TV, music, and games using MOVIE/TV, MUSIC, and GAME (b). The basic operations are introduced in the Basic Manual. For more details, see the Advanced Manual.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 31 ページ 2017年11月6日 月曜日 午後12時51分 License and Trademark The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround, Dolby Vision and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc.
SN29402768A_TX-NR676_676E_BAS_En_171107.book 32 ページ 2017年11月6日 月曜日 午後12時51分 1-10-5 Yokoami, Sumida-ku, Tokyo 130-0015 JAPAN http://www.onkyo.com/ 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. For Dealer, Service, Order and all other Business Inquiries: Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ For Product Support Team Only: 1-800-229-1687 http://www.us.onkyo.