AV RECEIVER Table of contents ≫ Instruction Manual Connections ≫ - Connecting Speakers ≫ Playback ≫ Setup ≫ Troubleshooting ≫ Appendix ≫ Supplementary Information ≫ TX-NR696 En Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫ What’s in the box Additional Function (Firmware Update) Update Information of the firmware Operation of added new functions Firmware Update Procedure Part Names Front Panel Display Rear Panel Remote Controller 5 6 6 6 7 10 10 12 13 16 Connecting speakers Speaker Installation Speaker Connections and "Speaker Setup" Settings Connecting a Power Amplifier (For European, Australian and Asian models only) Speaker combinations Connecting the TV To ARC TV To Non-ARC
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Playing Back FlareConnectTM Playing Back USB Storage Device Basic Operations Device and Supported Format Playing back files on a PC and NAS (Music Server) Windows Media® Player settings Playing Back Supported Audio Formats Play Queue Initial Setup Adding Play Queue Information Sort and Delete Playing Back Amazon Music Registering This Unit with Amazon Music Playing Amazon Music Connecting the Sonos System for Playback Necessary Equipment How to Connect This Uni
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 1. Input/Output Assign 2. Speaker 3. Audio Adjust 4. Source 5. Hardware 6. Multi Zone 7.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ What’s in the box 1. Main unit (1) 2. Remote controller (RC-972R) (1), Batteries (AAA/R03) (2) 3. Speaker setup microphone (1) • Used during Initial Setup. 4. Indoor FM antenna (1) 5. AM loop antenna (1) 6. Power cord (European, Australian, Taiwanese and Asian models) (1) • Quick Start Guide (1) *This is an online user manual. This is not supplied with the product. 1 2 3 4 5 • Connect speakers with an impedance of 4 Ω to 16 Ω.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Additional Function (Firmware Update) This unit is equipped with a function to update the firmware via network or USB port when the firmware update is announced after purchase. This enables various functions to be added and operations to be improved. Depending on the manufacturing timing of the product, the firmware may be switched to the updated one. In such a case, new functions may be added from the start.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Firmware Update Procedure Update 1. Press . The Setup menu is displayed on the TV screen. The update may take approx. 20 minutes to complete via network or via USB port. Existing settings are guaranteed in either updating method. When this unit is connected to the network, notifications of firmware updates may be displayed. To update the firmware, select "Update Now" with the cursor buttons of the remote controller and press ENTER.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ • • • • 4. Press ON/STANDBY on the main unit to turn the unit into standby mode. The process is completed, and your firmware is updated to the latest version. • Do not use on the remote controller. If an Error Message is Displayed If an error occurs, "- Error!" is displayed on the display of the unit. ("" represents an alphanumeric character.) Refer to the following descriptions and check. Turn off control devices (PC etc.) connected to the network.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 9. Press ON/STANDBY on the main unit to turn the unit into standby mode. The process is completed, and your firmware is updated to the latest version. • Do not use on the remote controller. 5. Press . The Setup menu is displayed on the TV screen. Setup 1. Input/Output Assign 1. TV Out / OSD 2. Speaker 2. HDMI Input 3. Audio Adjust 3. Digital Audio Input 4. Source 4.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Part Names Front Panel ❏❏ For details, see ( 10 p11) Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫ adjust. ( p83) 15. PHONES jack: Connect headphones with a standard plug (ø1/4″/6.3 mm). 16. Input selector buttons: Switches the input to be played. 17. SETUP MIC jack: Connect the supplied speaker setup microphone. ( p139) 18. AUX INPUT AUDIO/HDMI jack: Connect a video camera, etc. using a stereo mini plug cable (ø1/8″/3.5 mm) or HDMI cable. ( p43) 1. ON/STANDBY button 2.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Display 1 2 3 7 6 1. Speaker/Channel display: Displays the output channel that corresponds to the selected listening mode. 2. Lights in the following conditions. : Headphones are connected. Z2: ZONE 2 is on. : Connected by BLUETOOTH. : Connected by Wi-Fi. NET: Lights when connected to the network with the "NET" input selector. It will blink if incorrectly connected to the network.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Rear Panel (North American and Taiwanese models) 90° 180° (Taiwanese models) ❏❏ For details, see ( 13 p15) Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫ (European, Australian and Asian models) 90° 180° ❏❏ For details, see ( 14 p15) Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable. 2. TUNER AM/FM terminal: Connect the supplied antennas. 3. HDMI OUT jacks: Transmit video signals and audio signals with an HDMI cable connected to a monitor such as a TV or projector. 4. Wireless antenna: Used for WI-Fi connection or when using a BLUETOOTHenabled device. Adjust the angles according to the connection status.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Remote Controller 1. ON/STANDBY button 2. Input selector buttons: Switches the input to be played. 3. Play buttons: Used for playback operations for the Music Server ( p63) or USB device ( p60). Also, switching to "CEC MODE" with "19. MODE button" allows you to operate an HDMI CEC function-enabled AV component. (Some devices may not be operated.) 4.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connections Connecting speakers Connecting the TV Connecting Playback Devices Connecting an AV Component in a Separate Room (Multi-zone Connection) Connecting ZONE B Connecting Antennas Network Connection Connecting the Power Cord 18 38 41 44 46 47 48 49 17 Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting speakers You can select the layout of speakers to be installed from various patterns when using this unit. Use the following flow chart to select the speaker layout that suits your speakers and usage environment. You can check the connection method and default settings. Use height speakers? Yes • 5.1.2 Channel System ( p33) • 5.1.2 Channel System + ZONE SPEAKER ( No • • • • • p34) 18 5.1 Channel System ( p27) 5.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Speaker Installation 5.1 Channel System 2 3 6 This is a basic 5.1 Channel System. Front speakers output the front stereo sound, and a center speaker outputs the sound of the center of the screen, such as dialogs and vocals. Surround speakers create the back sound field. Powered subwoofer reproduces the bass sound, and creates the rich sound field.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 7.1 Channel System 3 2 6 This is a 7.1 Channel System that consists of the basic 5.1 Channel System ( p19) and added surround back speakers. Front speakers output the front stereo sound, and a center speaker outputs the sound of the center of the screen, such as dialogs and vocals. Surround speakers create the back sound field. Powered subwoofer reproduces the bass sound, and creates the rich sound field.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 5.1.2 Channel System A 5.1.2 Channel System is a speaker layout consisting of the basic 5.1 Channel System ( your speakers and usage environment from the following three types. p19) and added height speakers.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ❏❏ Front High Speakers/Rear High Speakers Installation Example 8 This is a system with the basic 5.1 channel system ( p19) consisting of front speakers, a center speaker, surround speakers and a powered subwoofer, and added front high speakers or rear high speakers combined. Installing the height speakers will enrich the sound field feeling in the upper space. Front high speakers or rear high speakers should be installed at least 3´/0.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ❏❏ Ceiling Speakers Installation Example 8 7 8 7 This is a system with the basic 5.1 channel system ( p19) consisting of front speakers, a center speaker, surround speakers and a powered subwoofer, and added top front speakers or top middle speakers or top rear speakers combined. Installing the height speakers will enrich the sound field feeling in the upper space.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ❏❏ Dolby Enabled Speakers (Dolby Speakers) Installation Example 8 This is a system with the basic 5.1 channel system ( p19) consisting of front speakers, a center speaker, surround speakers and a powered subwoofer, and added Dolby enabled speakers (front) or Dolby enabled speakers (surround) combined. Dolby enabled speakers are special speakers designed to face the ceiling, so that the sound is heard from overhead by bouncing the sound off the ceiling.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Speaker Connections and "Speaker Setup" Settings Connections (Note) Speaker Impedance Connect speakers with an impedance of 4 Ω to 16 Ω. If any of the speakers to be connected has an impedance of 4 Ω or more and less than 6 Ω, set "Speaker Impedance" to "4ohms" for "Speaker Setup" in the Initial Setup section ( p138). When setting "Speaker Impedance" from the Setup menu, press on the remote controller, and set "2.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connect the Subwoofer a a Subwoofer cable Connect a powered subwoofer with this unit using a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each SUBWOOFER PRE OUT jack.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 5.1 Channel System 2 6 3 "Speaker Setup" settings during Initial Setup ( p139) 1 Speaker Setup Speaker Channels Subwoofer 5 Yes Height Speaker --- Zone Speaker No Zone 2 Lineout 4 5.1 ch < > Bi-Amp Zone 2 No Speaker Impedance 6ohms or above Select how many speakers you have. Next • • • • • Speaker Channels: 5.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 5.1 Channel System + ZONE SPEAKER (North American and Taiwanese models) MAIN ROOM 2 6 "Speaker Setup" settings during Initial Setup ( p139) 3 1 Speaker Setup Speaker Channels Subwoofer Height Speaker 4 Yes --- Zone Speaker Zone 2 Zone 2 Lineout Zone 2 Bi-Amp 5 5.1 ch < > No Speaker Impedance 6ohms or above Select how many speakers you have. Next • • • • • • • ZONE 2 8 7 MAIN ROOM: This is a basic 5.1 Channel System.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 5.1 Channel System + ZONE SPEAKER (European, Australian and Asian models) MAIN ROOM 2 6 "Speaker Setup" settings during Initial Setup ( p139) 3 1 Speaker Setup Speaker Channels Subwoofer Height Speaker 4 Yes --- Zone Speaker Zone 2 Zone 2 Lineout Zone 2 Bi-Amp 5 5.1 ch < > No Speaker Impedance 6ohms or above Select how many speakers you have. Next • • • • • • • ZONE 2 8 7 MAIN ROOM: This is a basic 5.1 Channel System.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 5.1 Channel System (Bi-Amping the Speakers) 2 6 3 "Speaker Setup" settings during Initial Setup ( p139) 1 Speaker Setup Speaker Channels Subwoofer 5 Yes Height Speaker --- Zone Speaker No Zone 2 Lineout 4 5.1 ch < > Bi-Amp Speaker Impedance Zone 2 Yes 6ohms or above Select how many speakers you have. Next • • • • • Speaker Channels: 5.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 7.1 Channel System 2 6 3 "Speaker Setup" settings during Initial Setup ( p139) 1 Speaker Setup 5 Speaker Channels 4 Subwoofer Yes Height Speaker --- Zone Speaker No Zone 2 Lineout Bi-Amp 8 7.1 ch < > Zone 2 No Speaker Impedance 6ohms or above 7 Select how many speakers you have. Next • • • • • Speaker Channels: 7.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 7.1 Channel System + ZONE SPEAKER (For North American and Taiwanese models only) MAIN ROOM 2 6 "Speaker Setup" settings during Initial Setup ( p139) 3 1 Speaker Setup Speaker Channels Subwoofer 5 4 Height Speaker 7.1 ch < > Yes --- Zone Speaker Zone 2 Zone 2 Lineout Zone 2 Bi-Amp No Speaker Impedance 6ohms or above Select how many speakers you have. 8 7 Next • • • • • • • ZONE 2 bk 9 MAIN ROOM: This is a 7.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 5.1.2 Channel System 8 2 6 7 3 "Speaker Setup" settings during Initial Setup ( p139) 1 Speaker Setup Speaker Channels 5.1.2 ch < > Subwoofer Height Speaker Zone Speaker Zone 2 Lineout 5 Bi-Amp 4 Yes Front High No Zone 2 No Speaker Impedance 6ohms or above Select how many speakers you have. Next This is a combination of the 5.1 Channel System and front high speakers. A front high speaker is a type of height speaker.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 5.1.2 Channel System + ZONE SPEAKER (For North American and Taiwanese models only) MAIN ROOM 8 "Speaker Setup" settings during Initial Setup ( p139) 7 2 6 3 1 Speaker Setup Speaker Channels 5.1.2 ch < > Subwoofer Height Speaker Yes Front High Zone Speaker Zone 2 Zone 2 Lineout Zone 2 Bi-Amp No Speaker Impedance 6ohms or above 5 4 Select how many speakers you have. Next ZONE 2 bk 9 MAIN ROOM: This is a combination of the 5.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting a Power Amplifier (For European, Australian and Asian models only) Power amplifier You can connect a power amplifier to the unit and use the unit as a pre-amplifier in order to produce a large volume that cannot be output with the unit only. Connect the front speakers to the power amplifier. For details, refer to the power amplifier's instruction manual. • Use the PRE OUT FRONT jacks for connection as show on the left. a Setup • Set "2.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Speaker combinations • Up to two powered subwoofers can be connected in either combination. (North American and Taiwanese models) Speaker Channels FRONT CENTER SURROUND SURROUND BACK HEIGHT Bi-AMP ZONE 2 (ZONE SPEAKER) 2.1 ch (*1) (*1) 3.1 ch (*1) (*1) 4.1 ch (*1) (*1) (*1) (*1) 5.1 ch 6.1 ch (*2) 7.1 ch (*2) 2.1.2 ch (*3) (*1) (*4) (*1) 3.1.2 ch (*3) (*1) (*4) (*1) 4.1.2 ch (*5) 5.1.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ (European, Australian and Asian models) Speaker Channels FRONT CENTER SURROUND SURROUND BACK HEIGHT Bi-AMP ZONE 2 (ZONE SPEAKER) 2.1 ch (*1) (*1) 3.1 ch (*1) (*1) 4.1 ch (*1) (*1) 5.1 ch (*1) (*1) 6.1 ch 7.1 ch 2.1.2 ch (*2) (*1) (*3) (*1) 3.1.2 ch (*2) (*1) (*3) (*1) 4.1.2 ch 5.1.2 ch (*1) You can select either Bi-AMP or ZONE SPEAKER. (*2) Connect the height speakers to the SURROUND terminals.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting the TV Connect this unit between a TV and AV component. Connecting this unit with the TV can output the video and audio signals of the AV component to the TV, or play the audio of the TV on this unit. Connection with the TV differs depending on whether the TV supports the ARC (Audio Return Channel) function or not. The ARC function transmits the audio signals of the TV via an HDMI cable, and plays the audio of the TV on this unit.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ To ARC TV If the TV supports the ARC (Audio Return Channel) function (*), use only the HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of the TV for connection. You connect the HDMI cable to the port labeled OUT on the receiver side. • Another TV or projector can be connected to the HDMI OUT SUB jack. Switch between MAIN and SUB using the HDMI MAIN/SUB button on the remote controller ( p16) or "Quick Menu" ( p135).
Contents ≫ Connections ≫ Playback ≫ Setup ≫ To Non-ARC TV If the TV does not support the ARC (Audio Return Channel) function (*), connect an HDMI cable and digital optical cable. • If you use a cable set-top box, etc. connected to the input jack of this unit to watch TV (without using a TV’s built-in tuner), connection with a digital optical cable or analog audio cable is not required. • Another TV or projector can be connected to the HDMI OUT SUB jack.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting Playback Devices Connecting an AV Component with HDMI Jack Mounted This is a connection example of an AV component equipped with an HDMI jack. When connecting with an AV component that conforms to the CEC (Consumer Electronics Control) standard, you can use the HDMI CEC function (*) that enables linking with input selectors, etc.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting an Audio Component This is a connection example of an audio component. Connect a CD player using an analog audio cable. You can also connect a turntable that has an MM-type cartridge to the PHONO jack. • If the turntable has a built-in phono equalizer, connect it to any of the AUDIO IN jacks other than the PHONO jack.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting a Video Camera, etc. Connect a video camera, etc. to the AUX INPUT AUDIO/HDMI jack on the front panel using an HDMI cable or stereo mini plug cable (ø1/8 ″/3.5 mm).
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting an AV Component in a Separate Room (Multi-zone Connection) Connecting a TV (ZONE 2) While a disc is played on a Blu-ray Disc player in the main room (where this unit is located), you can play the video and audio of the same Blu-ray Disc player or another AV component on the TV equipped with an HDMI IN jack in a separate room (ZONE 2). The TV in the separate room can play only the video of devices connected to the HDMI IN1 to IN3 jacks of this unit.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting a Pre-main Amplifier (ZONE 2) You can enjoy 2-ch audio in the separate room (ZONE 2) while performing playback in the main room (where this unit is located). Use an analog cable to connect the ZONE 2 LINE OUT jack of this unit and the LINE IN jack of the premain amplifier in the separate room. The same source can be played back in the main room and ZONE 2 simultaneously. Also, different sources can be played back in both rooms.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting ZONE B Connecting a Pre-main Amplifier, etc. (ZONE B) While performing playback through speakers (ZONE A) connected to the unit, you can enjoy the audio of the same source at the same time with the pre-main amplifier or the transmitter of the wireless headphones connected to the ZONE B LINE OUT jack.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting Antennas Connect the antenna to this unit, and set up the antenna at the best position for listening while receiving radio signals. Attach the indoor FM antenna to the wall using push pins or adhesive tape.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Network Connection This unit can be connected to the network using a wired LAN or Wi-Fi (wireless LAN). You can enjoy network functions such as Internet radio by network connection. If connection is made by the wired LAN, connect the router and the ETHERNET jack with the LAN cable as shown in the illustration. To connect by Wi-Fi, select "Wireless" for "5.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting the Power Cord Connect the power cord after all the connections are completed. • This model includes a removable power cord. Be sure to connect the power cord to the AC INLET of the unit first, and then connect it to the outlet. Always disconnect the outlet side first when disconnecting the power cord.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Playback AV Component Playback BLUETOOTH® Playback Internet Radio Spotify AirPlay® DTS Play-Fi® FlareConnectTM USB Storage Device Playing back files on a PC and NAS (Music Server) Play Queue Amazon Music Connecting the Sonos System for Playback Listening To the AM/FM Radio Multi-zone ZONE B Playback Convenience functions Listening Mode Inputting Characters 51 52 53 55 56 58 59 60 63 68 70 71 73 78 81 82 85 111 50 Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫ AV Component Playback You can play the audio from AV components, such as Blu-ray disc players through this unit. • When a TV is connected to the HDMI OUT SUB jack, use the HDMI MAIN/SUB button or "Quick Menu" ( p135) to switch between MAIN and SUB. Basic Operations Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. 2.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ BLUETOOTH® Playback You can wirelessly play the audio on a BLUETOOTH-enabled device, such as a smartphone. Basic Operations Perform the following procedure when this unit is on. Pairing 1. When you press the BLUETOOTH button, "Now Pairing..." appears on the display, and the pairing mode is enabled. 2. Enable (turn on) the BLUETOOTH function of the BLUETOOTH-enabled device, and then select this unit from among the devices displayed.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Internet Radio By connecting this unit to an Internet-connected network, you can enjoy Internet radio services such as TuneIn Radio. • To play Internet radio services, the network needs to be connected to the Internet. • Depending on the Internet radio service, a user registration may be required on your PC beforehand. For details of each service, visit the website of each service. Playing Back Perform the following procedure when this unit is on. 1.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Internet Radio Service Menu You can bookmark specific stations, or delete stations that have been bookmarked. The displayed menu varies according to the service being selected. is displayed while a station is being played. When only this The menu icon icon is displayed, pressing ENTER will display the menu on the screen. When multiple icons are displayed, select the icon with the cursor, and press ENTER.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Spotify Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ AirPlay® By connecting this unit to the same network as that of iOS devices such as iPhone®, iPod touch® and iPad®, you can enjoy music files on iOS devices wirelessly. • Update the OS version on your iOS device to the latest version. • Depending on the iOS version, operation screens or operation procedures on the iOS device may be different. For details, refer to the operating instructions for the iOS device. Playing Back on This Unit 1.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Playing Back on multiple devices (AirPlay2) This unit supports AirPlay2. If the version of the iOS device is iOS11.4 or later, you can play the music of the iOS device on this unit and other devices that support AirPlay2. 1. Connect the iOS device to the access point where this unit is connected via network. 2.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ DTS Play-Fi® 2. Connect the mobile device to the network where this unit is connected. 3. Starting up Onkyo Music Control App will automatically display compatible devices. 4. Select this device from the compatible devices. Then, a list of applications such as a music streaming distribution service is displayed. Select the content to play, and perform operation according to the on-screen instructions. https://play-fi.com/ • When "5.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ FlareConnectTM When downloading Onkyo Controller (available on iOS or Android™) to mobile devices, such as a smartphone and tablet, you can enjoy the group playback that plays the same music on multiple audio products supporting the FlareConnect function.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ USB Storage Device You can play music files stored on a USB storage device. Basic Operations Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. 2. Plug your USB storage device containing music files into the USB port of this unit’s rear panel. 3. Press NET to display the network service list screen. 4. Select "USB" with the cursors, and then press ENTER.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ • To return to the previous screen, press . • To display an album title, artist name and album art of a file in WAV format, make the folder structure and file names as shown below when saving music files. The album art can be displayed by saving a .jpg file to display on the screen in the folder of bottom level. Note that a large volume of .jpg file may take time to be displayed, or may not be displayed.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Device and Supported Format USB Storage Device Requirements WAV (.wav/.WAV): WAV files contain uncompressed PCM digital audio. • Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz • Quantization bit: 8 bit, 16 bit, 24 bit • This unit can use USB storage devices that comply with the USB mass storage class standard. • The format of USB storage devices supports FAT16 or FAT32 file system format.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Playing back files on a PC and NAS (Music Server) Streaming play of music files stored on PCs or NAS devices connected to the same network as this unit is supported. • The network servers supported by this unit are PCs that incorporate players equipped with the server functions such as Windows Media® Player 11 or 12, or NASes supporting the home network function. When using Windows Media® Player 11 or 12, you need to make the settings beforehand.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Playing Back Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. 2. Start the server (Windows Media® Player 11, Windows Media® Player 12, or NAS device) containing the music files to play. 3. Make sure that the PC or NAS is properly connected to the same network as this unit. 4. Press NET to display the network service list screen.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting PC 1. Turn on your PC, and start Windows Media® Player 12. 2. In the "Stream" menu, select "Turn on media streaming" to display a dialog box. • If the media streaming is already turned on, select "More streaming options..." in the "Stream" menu to display the list of playback devices in the network, and then go to step 4. 3. Click "Turn on media streaming" to display the list of playback devices in the network. 4.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ • Depending on the version of Windows Media® Player, the names of items to select may differ from the above description.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Supported Audio Formats Apple Lossless (.m4a/.mp4/.M4A/.MP4): • Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz • Quantization bit: 16 bit, 24 bit This unit supports the following music file formats. Remote play of FLAC and DSD is not supported. MP3 (.mp3/.MP3): • Supported formats: MPEG-1/MPEG-2 Audio Layer 3 • Supported sampling rates: 44.1 kHz, 48 kHz • Supported bitrates: Between 8 kbps and 320 kbps, and VBR DSD (.dsf/.dff/.DSF/.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Play Queue Adding Play Queue Information 1. Select the "INPUT" input on the application screen, and tap the "USB" icon. Or, select the "NET" input, and tap the "USB" icon or "Music Server" icon. (Depending on the model, the icon names may be different.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ • If there are no tracks on the Play Queue list, only "Play Now displayed. " is 3. To delete a track, slide the track to the left until the trash icon changes to " ". If the device is on iOS, slide the " " icon to the left. Releasing your finger will delete the track from Play Queue. Sort and Delete 1. Select the "NET" input, tap the "Play Queue" icon, and enter the Play Queue service screen.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Amazon Music the login screen of Amazon Music. (Depending on the model, the icon names may be different.) • If the login screen is not displayed but an update or installation screen is displayed instead, perform the update or installation according to the onscreen instructions. Registering this unit with Amazon Music allows you to enjoy the music distribution service provided by Amazon.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting the Sonos System for Playback Setting Up Connecting this unit and Sonos Connect allows you to send the music or music sources on the Sonos App to this unit. Through Sonos Connect, you can play this unit with the same group of another Sonos device on the network or can play only on this unit. Also, if you start to play music from Sonos App, this unit is automatically turned on and the link function to switch input works. • When "5.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Playing Sonos on This Unit 1. Select desired tracks using Sonos App and send the tracks to the room where this unit is located (or to the group). It is recommended to give an easy-toremember name to the combination of this unit and Sonos Connect, such as TV Room or Living Room where this unit is located. • If the input selector of this unit is not automatically switched even after the start of music playback, stop the playback once and start again.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Listening To the AM/FM Radio You can receive AM and FM radio stations on this unit with the built-in tuner. Tuning into a Radio Station Perform the following procedure when this unit is on. Tuning Automatically 1. Press TUNER repeatedly to select either "AM" or "FM". 2. Press MODE repeatedly to display "TunMode: Auto" on the display. 3. When you press the cursors / , automatic tuning starts, and searching stops when a station is found.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ When FM broadcasts reception is poor: Perform the procedure for "Tuning Manually" ( p74). Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception. Tuning Manually Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception. 1. Press TUNER repeatedly to select either "AM" or "FM".
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Presetting a Radio Station Registration Procedure You can preset up to 40 of your favorite AM/FM radio stations. After tuning in to the AM/FM radio station you want to register, perform the following procedure. 1. Press MEMORY so that the preset number on the display blinks. 2. While the preset number is blinking (approx. 8 seconds), repeatedly press the cursors / to select a number between 1 and 40. 3. Press MEMORY again to register the station.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Selecting a Preset Radio Station 1. Press TUNER. 2. Press the cursors / to select a preset number. Deleting a Preset Radio Station 1. Press TUNER. 2. Press the cursors / to select the preset number to delete. 3. After pressing MEMORY, press CLEAR while the preset number is blinking, and delete the preset number. When deleted, the number on the display disappears.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Using RDS (European, Australian and Asian models) RDS stands for Radio Data System, and is a method of transmitting data in FM radio signals. In regions where RDS can be used, when you tune in to a radio station broadcasting program information, the radio station name is displayed on the display. When you press the button on the remote controller in this state, you can use the following functions. button, the unit starts to search for another station.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Multi-zone You can enjoy 2-ch audio in the separate room (ZONE 2) while performing playback in the main room (where this unit is located). The same source can be played back in the main room and ZONE 2 simultaneously. Also, different sources can be played back in both rooms. For the "NET" or "BLUETOOTH" input selector, you can select only the same source for the main room and separate room.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Playing Back In remote controller operation, while pressing and holding the ZONE 2 SHIFT button, press other buttons for operation. 1. While pressing and holding the ZONE 2 SHIFT button on the remote controller, point the remote controller at this unit and press . • "Z2" on the display of the main unit lights up. 2.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ • DSD audio signals cannot be output to ZONE 2 with the "NET" input selector. • If ZONE 2 is on, power consumption during standby will increase. • If ZONE 2 is turned on when the Pure Audio listening mode is selected in the main room, the mode will automatically switch to the Direct listening mode. (European, Australian, Taiwanese and Asian models) To disable the function: While pressing and holding the ZONE 2 SHIFT button on the remote controller, press .
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ZONE B Playback While performing playback through speakers (ZONE A) connected to the unit, you can enjoy the audio of the same source with the pre-main amplifier, etc. (ZONE B) ( p46) connected to the ZONE B LINE OUT jack at the same time. Playing Back 1. Press the Q button on the remote controller and select "Audio" - "Zone B". • In the following cases, "Zone B" cannot be selected. –– When ZONE 2 is On –– When "2.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Convenience functions Displaying Your Favorite Video on TV While Playing Music While listening to the music from a CD or BLUETOOTH-enabled device, you can display video on TV from an AV component such as a Blu-ray Disc player. • For audio playback, you can select an input selector to which video input is not assigned, such as "CD", "PHONO", "TUNER", "NET" and "BLUETOOTH".
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Adjusting the tone Adjusting TREBLE/BASS You can adjust the sound quality of the front speakers. 1. Press TREBLE or BASS to select the content to adjust. TREBLE: Enhances or moderates the high-tone range of the front speakers. BASS: Enhances or moderates the low-tone range of the front speakers. 2. Press + or - to adjust. Adjusting VOCAL Emphasizes movie lines and music vocals to listen to them more easily. It is effective to movie lines in particular.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Sleep Timer You can allow the unit to enter standby automatically when the specified time has elapsed. Press the SLEEP button on the remote controller, and select any of "30 min", "60 min" and "90 min". "Off": The unit does not automatically enter standby mode. You can also set this by pressing the button on the remote controller and selecting "5. Hardware" - "Power Management" - "Sleep Timer" ( p131) on the Setup menu.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Listening Mode This unit is equipped with a variety of listening modes, and you can select the optimum listening mode for movies, TV, music, and games by pressing MOVIE/TV, MUSIC, and GAME. Selecting a Listening mode 1. Press one from among MOVIE/TV, MUSIC, and GAME during playback. 2. Press the selected button repeatedly to switch the modes displayed on the display of the main unit.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Checking the input format and listening mode Repeatedly pressing the button on the remote controller switches the display of the main unit in the following order. • The display content for the BLUETOOH input is different. • Not all the information is necessarily displayed. Input source and volume Listening mode Input Format The display is switched in a few seconds.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Speaker Layouts and Selectable Listening Modes See the following table for selectable listening modes for each speaker layout. Speaker layout 2.1 ch 3.1 ch 4.1 ch 5.1 ch 6.1 ch 7.1 ch DD (Dolby Audio - DD) (*1) (*1) (*1) (*2) (*2) DD+ (Dolby Audio - DD+) (*1) (*1) (*1) (*1) (*1) DTHD (Dolby Audio - TrueHD) (*1) (*1) (*1) (*1) (*1) Listening mode 2.1.2 ch 3.1.2 ch 4.1.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Listening mode Speaker layout 2.1 ch 3.1 ch 4.1 ch 5.1 ch DTS 6.1 ch 7.1 ch 2.1.2 ch 3.1.2 ch 4.1.2 ch 5.1.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Listening mode Speaker layout 2.1 ch 3.1 ch 4.1 ch 5.1 ch 6.1 ch 7.1 ch 2.1.2 ch 3.1.2 ch 4.1.2 ch 5.1.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Listening Mode Effects Updating of listening modes Listening modes such as DTS Virtual:X, Atmos 2.0 and DSur 2.0 are added when the firmware is updated after purchase or the firmware is switched in the product production process. For details of firmware update, see "Additional Function (Firmware Update)" ( p6). (Firmware version supporting Atmos 2.0, etc.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ channel or height channel is virtually created for expansion playback. • This mode cannot be selected when DTS signal is input. DD (Dolby Audio - DD) This mode faithfully reproduces the sound design recorded in the Dolby Digital audio format. Dolby Digital is a multi-channel digital format developed by Dolby Laboratories, Inc. and is widely adopted for use in movie production. It is also a standard audio format for DVD-Video and Blu-ray Discs.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ DTS-HD HR (DTS-HD High Resolution) by setting the output on the player side to the PCM output. • This listening mode cannot be selected if the output setting on your Blu-ray Disc/DVD player is not set to DSD. This mode faithfully reproduces the sound design recorded in the DTS-HD High Resolution Audio audio format. DTS-HD High Resolution Audio is an optional audio format based on 5.1ch for Blu-ray Discs. It is possible to record a maximum of 7.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ cannot be selected when height speakers are connected. • This mode cannot be selected when "Speaker Virtualizer" ( "Off" (Default: On). Game-Action p123) is set to This mode is suitable for games with a lot of action. Game-Rock DTS:X This mode is suitable for games with rock content. This mode faithfully reproduces the sound design recorded in the DTS:X audio format.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Stereo volume is reduced, by intelligently adjusting ambient surround channel levels and frequency response. In this mode, sound is output from the right and left front speakers and subwoofer. • Re-EQ The speakers for the front channel in a movie theater are installed behind the screen. For this reason the high range is enhanced in the sound track of the front channel in view of acoustic characteristics such as the necessity to penetrate the screen.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ theater or similar large area. In this mode, THX Loudness Plus is set to the theater level, and Re-EQ, Timbre Matching and Adaptive Decorrelation are all enabled. –– THX Games: Use this mode for high-fidelity spatial reproduction of game sound. THX Loudness Plus is set to a level suited to the audio level of the game, and Timbre Matching is enabled.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Formats and Selectable Listening Modes You can select a variety of listening modes according to the audio format of the signal to be input. • List of listening modes selectable with the MOVIE/TV button ( p96) • List of listening modes selectable with the MUSIC button ( p100) • List of listening modes selectable with the GAME button ( p105) • Selectable listening modes when headphones are connected are Pure Audio, Mono, Direct, and Stereo only.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode Input Format Listening Mode Multich PCM Direct DSD • You cannot select any mode other than Direct, AllCh Stereo and Full Mono if the sampling rate is 5.6/11.2 MHz.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format DD+ Listening Mode Input Format Direct DD+ DTHD Listening Mode Input Format Listening Mode Direct DTS Direct DTHD *1 *2 *3 DSur DSur THX Cinema TV Logic *2 *3 *4 *5 *6 *7 DTS Neural:X*3 THX Cinema *4 THX Sel Cin *5 AllCh Stereo *1 DTS*1 *2 *1 *2 TV Logic *6 DTS Virtual:X*4 *5 *3 THX Cinema*6 *4 THX Sel Cin*7 *5 Full Mono*6 AllCh Stereo*6 TV Logic*8 T-D*7 Full Mono*6 AllCh Stereo*9 T-D*7 Full Mono*9 Canno
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS 96/24 Direct DTS Express Direct DTS-HD HR Direct DTS 96/24 DTS Express *1 *2 DTS Neural:X DTS Virtual:X THX Cinema THX Sel Cin *3 DTS Neural:X *4 *5 DTS Virtual:X THX Cinema *6 THX Sel Cin *7 *2 *3 *4 *5 *6 *7 *8 *9 *3 DTS Neural:X*3 *4 *5 DTS Virtual:X*4 *5 THX Cinema*6 *6 THX Sel Cin*7 *7 TV Logic*8 TV Logic*8 TV Logic*8 AllCh Stereo*9
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode Input Format Listening Mode DTS-HD MSTR Direct DTS-ES Direct *1 *2 *3 *4 *5 *6 *7 *8 *9 DTS-HD MSTR*1 *2 DTS*1 DTS Neural:X*3 ES Matrix*2 DTS Virtual:X*4 *5 ES Discrete*2 THX Cinema*6 DTS Neural:X THX Sel Cin*7 DTS Virtual:X*3 *4 TV Logic*8 THX Cinema*5 AllCh Stereo*9 TV Logic*6 Full Mono*9 AllCh Stereo*7 T-D*4 Full Mono*7 Cannot be selected when the input format is 2 ch.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode PCM Music files (except DSD) Pure Audio Multich PCM Pure Audio DSD • You cannot select any mode other than Pure Audio, Direct, Stereo, AllCh Stereo and Full Mono if the sampling rate is 5.6/11.2 MHz.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Atmos*1 Listening Mode Input Format Pure Audio DD+ Listening Mode DD Listening Mode Pure Audio Direct Direct Stereo Stereo Stereo DD+*1 *2 *3 DTHD*1 *2 Orchestra DSur DSur Unplugged THX Music*4 THX Music*3 Studio-Mix Orchestra*5 THX Sel Mus*4 AllCh Stereo Unplugged*5 Orchestra*5 Full Mono Studio-Mix*5 AllCh Stereo With the firmware version before supporting Atmos 2.0, etc.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS Pure Audio DTS 96/24 Pure Audio DTS Express Pure Audio Direct Direct Direct Stereo Stereo Stereo DTS*1 *2 DTS 96/24*1 *2 DTS Neural:X DTS Virtual:X *4 *5 *6 *7 *8 *9 DTS Virtual:X DTS Virtual:X*4 *5 THX Music*6 THX Music*6 THX Sel Mus*7 THX Sel Mus*7 Orchestra*8 Orchestra*8 Orchestra*8 Unplugged *8 Unplugged Unplugged*8 *8 Studio-Mix Fu
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS-HD HR Pure Audio DTS-HD MSTR Pure Audio DTS-ES Pure Audio Direct Direct Direct Stereo Stereo Stereo DTS-HD HR*1 *2 DTS-HD MSTR*1 *2 DTS*1 DTS Neural:X *3 DTS Neural:X *3 ES Matrix*2 *4 *5 DTS Virtual:X *4 *5 ES Discrete*2 DTS Virtual:X THX Music*6 THX Music*6 DTS Neural:X THX Sel Mus*7 THX Sel Mus*7 DTS Virtual:X*3 *4 Orchestra*8 Orchest
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode DTS:X Pure Audio Direct Stereo GAME button Input Format Listening Mode Analog Direct DTS Virtual:X *3 *4 THX Games*4 Game-RPG*5 Game-Action*5 Game-RPG*4 Game-Rock*5 Game-Action*4 AllCh Stereo*4 *2 DTS Virtual:X*2 *3 THX Games*3 Studio-Mix*3 Game-Sports*5 Game-Rock*4 *4 AllCh Stereo*6 Game-Sports*4 Cannot be selected when "Speaker Virtualizer" is set to "Off".
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode Input Format Listening Mode Multich PCM Direct DSD • You cannot select any mode other than Direct, AllCh Stereo and Full Mono if the sampling rate is 5.6/11.2 MHz.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format DD Listening Mode Input Format Direct DD+ Listening Mode DD*1 *2 DD+*1 *2 *3 *4 *5 *6 *7 DTHD*1 *2 DSur DSur THX Games*4 THX Games*3 THX Sel Gam*4 Game-RPG*5 THX Sel Gam*4 Game-RPG Game-Action *5 Game-RPG*5 *5 Game-Action*5 Game-Rock*5 Game-Action*5 Game-Rock*5 Game-Sports*5 Game-Rock*5 Game-Sports*5 AllCh Stereo*6 Game-Sports*5 AllCh Stereo Full Mono AllCh Stereo*6 *6 Cannot be selected when the input format i
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS Direct DTS 96/24 Direct DTS Express Direct DTS DTS 96/24 *1 *2 DTS Neural:X DTS Virtual:X *3 DTS Neural:X *4 *5 DTS Virtual:X THX Games THX Sel Gam*7 Game-RPG*8 Game-RPG*8 Game-RPG*8 Game-Action*8 Game-Action*8 Game-Action*8 Game-Rock*8 Game-Rock*8 Game-Rock*8 Full Mono *7 Game-Sports *8 AllCh Stereo *9 Full Mono *9 T-D *6 *7 *8 *9
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS-HD HR Direct DTS-HD MSTR Direct DTS-ES Direct DTS-HD HR DTS-HD MSTR DTS*1 *3 DTS Neural:X *3 ES Matrix*2 *4 *5 DTS Virtual:X *4 *5 ES Discrete*2 *1 *2 DTS Neural:X DTS Virtual:X *1 *2 THX Games THX Games DTS Neural:X THX Sel Gam*7 THX Sel Gam*7 DTS Virtual:X*3 *4 Game-RPG*8 Game-RPG*8 THX Games*5 Game-Action*8 Game-Action*8 Game-RPG*6 G
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode DTS:X Direct DTS:X DTS Virtual:X*1 *2 Game-RPG*3 Game-Action*3 Game-Rock*3 Game-Sports*3 AllCh Stereo*4 Full Mono*4 T-D*1 *1 *2 *3 *4 Cannot be selected when "Speaker Virtualizer" is set to "Off". Cannot be selected when height speakers are installed. Surround speakers or height speakers need to be installed. A center speaker, surround speakers, or height speakers need to be installed.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Inputting Characters You can input characters or symbols on the keyboard displayed on the TV screen such as when inputting a password for Wi-Fi Setup ( p128) or naming a preset radio station ( p125). 1. Select a character or symbol with the cursors / / / on the remote controller and press the ENTER button. 2. When saving characters after input, select "OK" and press the ENTER button. , / / / ENTER .
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setup Menu Menu list You can configure advanced settings to have a more enjoyable experience with this unit. For operation details, refer to "Menu operations" ( p114). 1. Input/Output Assign 1. TV Out / OSD 2. HDMI Input 3. Digital Audio Input 4. Analog Audio Input Make settings for TV output and On-Screen Displays (OSD) that appear on the TV. Change input assignment between the input selectors and HDMI IN jacks.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 4. Source 1. My Input Volume 2. Name Edit Audio Select Video Select Set a volume value for each input selector. Set an easy name for each input. Select the prioritized input terminal when multiple audio sources are connected to one input selector. When "TUNER", "NET", or "BLUETOOTH" input is selected, you can set the input from which video is displayed on the TV. p125 p125 p126 p126 5. Hardware 1. HDMI 2. Network 3. Bluetooth 4. Power Management 5.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Menu operations Use the on-screen displays (OSD) that appear on the TV to make the settings. Press on the remote controller to display the Setup menu. Setup 1. Input/Output Assign 1. TV Out / OSD 2. Speaker 2. HDMI Input 3. Audio Adjust 3. Digital Audio Input 4. Source 4. Analog Audio Input 5. Hardware 6. Multi Zone 7. Miscellaneous Select the item with the cursors / of the remote controller, and press the ENTER button to confirm your selection.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 1. Input/Output Assign 1. TV Out / OSD Setting Item Default Value Setting Details 1080p -> 4K Upscaling Off When a TV supporting 4K is used, video signals input with 1080p can be automatically output with 4K. "Off": When this function is not used "Auto": When this function is used If your TV does not support 4K, set it to "Off".
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Default Value Setting Details Mini Player OSD Always On You can display on the TV the images from another input selected last while playing the audio from NET or BLUETOOTH input. After switching the input to NET or BLUETOOTH, play the images and audio.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Default Value Setting Details TV --- "HDMI 1 (HDCP 2.2)" to "HDMI 6 (HDCP 2.2)": Assign a desired HDMI IN jack to the TV button. If you do not assign a jack, select "---". To select an HDMI IN jack already assigned to another input selector, change its setting to "---" first. PHONO --- 3. Digital Audio Input Change input assignment between the input selectors and DIGITAL IN COAXIAL/ OPTICAL jacks.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 2. Speaker 4. Analog Audio Input Change input assignment between the input selectors and AUDIO IN jacks. If you do not assign a jack, select "---". Setting Item Default Value Setting Details BD/DVD AUDIO 1 "AUDIO 1" to "AUDIO 4": Assign a desired AUDIO IN jack to the BD/DVD button. GAME --- "AUDIO 1" to "AUDIO 4": Assign a desired AUDIO IN jack to the GAME button.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Default Value Setting Details Zone 2 Lineout Zone 2 Set an output destination of the audio output from ZONE 2 LINE OUT/ZONE B LINE OUT jack. "Zone 2": When connecting a pre-main amplifier in a separate room (ZONE 2) "Zone B": When connecting a pre-main amplifier, transmitter of wireless headphones, etc.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Default Value Setting Details Surround 80 Hz (THX) Select the crossover frequency from "40 Hz" to "200 Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output. • "Full Band" can be selected only when "Front" is set to "Full Band". • If the item cannot be selected even though connection is correct, check if the setting in "Configuration" - "Speaker Channels" matches the number of connected channels.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 4. Level Calibration Adjust the volume level of each speaker. Setting Item Default Value Setting Details Front Left 0 dB Select a value between "-12 dB" and "+12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select the desired level. Center 0 dB Select a value between "-12 dB" and "+12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select the desired level.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 6. Equalizer Settings You can adjust the output volume of the range for each connected speaker. Adjust the volume of different sound ranges for each speaker. You can set three different equalizers in Preset 1 to 3. The number of frequencies that can be selected for each speaker is up to five bands for the Subwoofer and nine bands for the other speakers. Setting Item Default Value Setting Details Front 0.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Default Value Setting Details Loudness Plus On When this is set to "On", you can enjoy even subtle nuances of audio expression at low volume. This is only available when the THX listening mode is selected. THX Loudness Plus THX Loudness Plus is a new volume control technology mounted on THX Ultra and THX Selectcertified receivers.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 2. Dolby 3. DTS Change the setting of when Dolby signals are input. Change the setting of when DTS signals are input. Setting Item Default Value Setting Details Setting Item Default Value Setting Details Loudness Management On When playing Dolby TrueHD, enable the dialog normalization function which keeps the volume of dialog at a certain level.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 4. Source 5. Volume Change the Volume settings. Setting Item Default Value Setting Details Volume Display Absolute Switch the volume display between the absolute value and relative value. The absolute value 82 is equivalent to the relative value 0 dB. "Absolute": Absolute value such as "1" and "99" "Relative": Relative value such as "-81 dB" and "+18 dB" • If the absolute value is set to "82", "82 Ref" appears on the display.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Audio Select Select the priority for input selection when multiple audio sources are connected to one input selector, for example, connections to both the "BD/DVD" HDMI IN jack and the "BD/DVD" AUDIO IN jack. The setting can be made for each input selector button. Select the input selector to make the setting. Note that some of the default values cannot be changed.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 5. Hardware 1. HDMI Change the settings of the HDMI function. Setting Item Default Value Setting Details HDMI CEC Off Setting this to "On" enables the input selection link and other link functions with HDMI-connected CECcompatible device. "On": When this function is used "Off": When this function is not used When this setting is changed, turn off and then on again the power of all connected devices.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Default Value Setting Details Audio TV Out Off You can enjoy audio through the speakers of the TV while this unit is on. "On": When this function is used "Off": When this function is not used • This setting is fixed to "Auto" if you set "1. Input/ Output Assign" - "TV Out/OSD" - "HDMI Out" or "HDMI" - "HDMI Out" in the "Quick Menu" to "MAIN" or "MAIN+SUB" and set "HDMI CEC" to "On". If you change this setting, set "HDMI CEC" to "Off".
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Default Value Setting Details Setting Item Proxy Port 8080 Displays/Sets the proxy server port number when you input "Proxy URL". AirPlay Password Default Value Friendly Name Onkyo TX-NR696 XXXXXX Change the model name of this unit which is displayed on the device connected to the network to an easily recognized name. 1. P ress ENTER to display the Edit screen. 2. Select a character or symbol with the cursors, and press ENTER.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 3. Bluetooth Change the settings for the Bluetooth function. Setting Item Default Value Setting Details Bluetooth On Select whether or not to use the BLUETOOTH function. "On": Enables connection with a BLUETOOTHenabled device by using the BLUETOOTH function. Select "On" also when making various BLUETOOTH settings.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 4. Power Management Change the settings for the power-save function. Setting Item Default Value Setting Details Sleep Timer Off You can allow the unit to enter standby automatically when the specified time has elapsed. Select a value from "30 minutes", "60 minutes" and "90 minutes". "Off": The unit does not automatically enter standby mode.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Default Value Bluetooth Wakeup Off Setting Details Setting Item This function wakes up the unit on standby by connecting a BLUETOOTH-enabled device.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 6. Multi Zone 7. Miscellaneous 1. Zone 2 1. Tuner Change the settings for Zone 2. Change the frequency step for the tuner. Setting Item Setting Details Setting Item Default Value Setting Details Maximum Volume Off Default Value Set the maximum value for Zone 2 to prevent the volume from becoming too loud. Select a value from "Off", and "50" to "99". (When "3.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 3. Firmware Update 6. Factory Reset Change the settings for Firmware Update. All the settings are restored to factory defaults. Setting Item Default Value Setting Details Setting Item Default Value Setting Details Update Notice Enable Availability of a firmware update is notified via network. "Enable": Notify updates "Disable": Do not notify updates Factory Reset - Version All the settings are restored to factory defaults.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Quick Menu Menu operations You can quickly adjust the settings you frequently use, such as tone adjustments, etc. You can make the settings on the TV screen during playback. Press Q on the remote controller to display the Quick Menu. Quick Menu BD/DVD HDMI HDMI Out Audio A/V Sync AccuEQ Audio Return Channel Level Select the item with the cursors / of the remote controller, and press the ENTER button to confirm your selection.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Audio Music Optimizer: Improve the quality of the compressed audio. Playback sound of lossy compressed files such as MP3 will be improved. The setting can be set for each input. This works in signals whose sampling frequencies are 48 kHz or less. The setting is not effective in the bitstream signals. • It cannot be set if the listening mode is Pure Audio (European, Australian, Taiwanese and Asian models) or Direct.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Web Setup Menu operations You can make the settings for the network function of this unit using an Internet browser on a PC, smartphone, etc. Network Connection: You can select a network connection method. If you select "Wireless", select an access point from "Wi-Fi Setup" to connect. on the remote controller to display the Setup menu. 1. Press 2. Select "5.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Initial Setup with Auto Start-up Wizard Operations TV’s REMOTE INPUT Inputs TV HDMI 1 HDMI 2 HDMI 3 TV When you turn the unit on for the first time after purchase, the Initial Setup screen is automatically displayed on the TV to allow you to make settings required for startup using simple operations following on-screen guidance. 1. Switch the input of the TV to the input connected to the unit. 2. Put batteries into the remote controller of this unit. 3.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 1. Speaker Setup 1. Select the connected speaker configuration and press ENTER. Note that the image on the screen changes each time you select the number of channels in "Speaker Channels". Speaker Setup Speaker Channels Subwoofer 7.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 4. ARC Setup To connect with an ARC-compatible TV, select "Yes". The ARC setting on this unit turns on, and you can listen to the TV's audio through this unit. • Pressing "Yes" turns the HDMI CEC function on, and the power consumption in standby mode will increase. 5. Network Connection 1. To make the network connection settings, select "Yes" and press ENTER.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Troubleshooting Tuner BLUETOOTH function Network function USB storage device Wireless LAN Network ZONE B function Multi-zone function Remote Controller Display Others Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/ connecting the power cord, which is easier than working on the connection, setting and operating procedure.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ When the unit is operating erratically ❏❏Try restarting the unit Restarting this unit may solve the problem. After turning the unit to standby mode, press and hold the ON/STANDBY button of the main unit for at least 5 seconds, and then restart the unit. (The settings on this unit are kept.) If the problem persists after restarting the unit, unplug and plug the power cords of this unit and connected devices or HDMI cable .
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ❏❏Resetting the unit (this resets the unit settings to the default) If the restart of the unit does not solve the problem, reset the unit, and restore all the settings to the factory default at the time of purchase. This may solve the problem. If the unit is reset, your settings are restored to the default values. Be sure to note down your setting contents before performing the following operations. 1.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Troubleshooting Power ❏❏When the power is turned on, "AMP Diag Mode" appears on the display of the main unit. • The protection circuit function may have operated. If the unit suddenly enters the standby state and "AMP Diag Mode" appears on the display of the main unit when the power is turned on again, this function is diagnosing whether or not the main unit is malfunctioning or there is an abnormality with the speaker cable connection.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ❏❏No sound from a connected player • Change the input selector on this unit to the position of the jack to which the player is connected. • Check the digital audio output setting on the connected device. On some game consoles, such as those supporting DVD, the default setting may be off. • For some DVD-Video discs, you need to select an audio output format from a menu.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ❏❏Sound suddenly reduces • When using the unit for extended periods with the temperature inside the unit exceeding a certain temperature, the volume may be reduced automatically to protect the circuits. ❏❏Sound suddenly changes • When "My Input Volume" is set, the volume is set for each input selector. Check "4. Source" - "My Input Volume" on the Setup menu ( p125).
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Video • Confirm that the connection between the output jack on the connected device and the input jack on this unit is correct. • Make sure that none of the connecting cables are bent, twisted, or damaged. • When the TV image is blurry or unclear, the power cord or connection cables of the unit may have interfered. In such a case, keep distance between TV antenna cable and cables of the unit.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Tuner ❏❏Poor reception or much noise • • • • • • • • Recheck the antenna connection. Move the antenna away from the speaker cord or power cord. Move the unit away from your TV or PC. Passing cars or airplanes in the vicinity can cause interference. If radio waves are blocked by concrete walls, etc., radio reception may be poor. Change the reception mode to mono ( p74). Operating the remote controller during AM reception may cause noise.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Network function • • • • If you cannot select a network service, start up the network function to select it. It may take approx. one minute to start it up. When the NET indicator is blinking, this unit is not properly connected to the home network. Unplug and plug the power cords of this unit and the router, or restart the router. If the desired router is not displayed in the access point list, it may be set to hide SSID, or the ANY connection may be off.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Wireless LAN Network • Unplug and plug the power cords of this unit and the wireless LAN router, check the power-on status of the wireless LAN router, or restart the wireless LAN router. Check the following if the problem persists after you have confirmed the above. ❏❏Cannot access wireless LAN network • The wireless LAN router setting may be switched to Manual. Restore the setting to Auto. • Try the manual set-up. The connection may succeed.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Multi-zone function ❏❏Cannot ZONE-output the audio of externally connected AV components • To output audio from an externally connected AV component to ZONE 2, connect it to any of HDMI IN1 to IN3 jacks. If the AV component is not equipped with an HDMI jack, use a digital coaxial cable, digital optical cable or analog audio cable. Also, the audio from externally connected AV components can be output to ZONE 2 only when the audio is analog or 2ch PCM signal.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ❏❏The measurement results of AccuEQ Room Calibration show different distances to the speakers from the actual ones • Depending on the speakers you are using, some errors may occur in the measurement results. If this is the case, make the settings in "2. Speaker" - "Distance" in the Setup menu.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Reducing the Power Consumption in Standby State When the following functions are enabled, the power consumption in standby state increases. To reduce the power consumption in standby state, check each setting and set the functions to "Off".
Contents ≫ Connections ≫ Playback ≫ Setup ≫ About HDMI Compatible functions HDMI (High Definition Multimedia Interface) is a digital interface standard for connecting TVs, projectors, Blu-ray Disc/DVD players, digital tuners, and other video components. Several separate video and audio cables have been required to connect AV components so far. With HDMI, a single cable can transmit control signals, digital video and digital audio (2-channel PCM, multichannel digital audio, and multichannel PCM).
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Bitstream: Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS:X, DTSHD High Resolution Audio, DTS-HD Master Audio, DTS 96/24, DTS-ES, DTS Express DSD: Supported sampling rates: 2.8 MHz Your Blu-ray Disc/DVD player must also support the HDMI output of the above audio formats. Supported resolutions HDMI IN1 to IN6: • Copyright protection technology: HDCP1.4/HDCP2.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ General Specifications Amplifier Section Rated Output Power (FTC) (North American) With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Network Section Communication system BLUETOOTH Specification version 4.2 Frequency band 2.4 GHz band Modulation method FHSS (Frequency Hopping Spread Spectrum) Compatible BLUETOOTH profiles A2DP 1.2 AVRCP 1.3 Supported Codecs SBC AAC Transmission range (A2DP) 20 Hz - 20 kHz (Sampling frequency 44.1 kHz) Maximum communication range Line of sight approx.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Supported Deep Color, x.v.Color™, Lip Sync, Audio Return Channel, 3D, 4K 60 Hz, CEC, Extended Colorimetry (sYCC601, Adobe RGB, Adobe YCC601), Content Type, HDR (HDR10, BT.2020, HLG), Dolby Vision Audio Format Dolby Atmos, Dolby TrueHD, Dolby Digital, Dolby Digital Plus, DTS, DTS:X, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTSES, DTS Express, DSD, PCM HDCP version 2.
SN 29403628A_EN (C) Copyright 2019 Onkyo & Pioneer Corporation Japan. All rights reserved. H1904-1 http://www.onkyo.