TX-NR747 AV RECEIVER Basic Manual This manual includes information needed when starting up and also instructions for frequently used operations. The Advanced Manual is published on the web for ecological reasons and has more detailed information and advanced settings. Advanced Manual found here http://www.onkyo.com/manual/txnr747/adv/en.html 150416_TX-NR747_BAS_En_SN29401986.
Features Contents ●● Equipped with 7 ch amplifier ●● Supports playback in Dolby Atmos format which provides 360-degree placement and movement of sounds including overhead sound ●● Supports playback in DTS:X, which is DTS's nextgeneration object-based surround sound technology that includes height to deliver a fully-immersive listening experience to your living room ●● Dolby Surround listening mode expands 2 ch, 5.1 ch or 7.
2 3 1 4 56 7 8 9 G H I J K L (European, Australian and Asian models) (European, Australian and Asian models) M F N O P Q R S Front Panel 1 zON/STANDBY button: Turns the unit on or into 2 3 4 5 6 7 8 9 F standby mode. DOLBY ATMOS indicator: Lights when playing Dolby Atmos. DTS:X indicator: Lights when playing DTS:X. ZONE2 button: Controls the multi-zone function. Remote control sensor: Receives signals from the remote controller. OFF button: Switches the multi-zone function off.
1 2 3 4 5 6 8 7 9 F 1 23 4 5 6 7 9 8 Display 1 Lights in the following conditions. "Z2": Zone 2 output (European and Taiwanese models) G H I ¼¼ "USB" and "NET" will flash if the connection is not correct. J K 2 Stays lit when headphones are connected. 3 Lights when NET or USB is controlled. 4 Lights according to the type of input digital signals and Rear Panel the listening mode. 1 RI REMOTE CONTROL jack: An Onkyo product with RI 2 3 4 5 6 7 8 is on.
Step 1: Connections Characteristics of speaker types 1 Connecting speakers Speaker layout F 9 # " $ ' & % H G "# output front stereo sound and $ output center sound such as dialogs and vocals. %& create back sound field. ' reproduces bass sounds and creates rich sound field. Connecting 78 speakers, 9F speakers or GH speakers enables playback in 7.1 ch configuration.
Step 1: Connections and the other type is designed to be integrated with normal speakers. Dolby Enabled Speakers placed with their diaphragms facing toward the ceiling create higher effect in the Dolby Atmos and Dolby Surround listening modes by providing sounds echoing off the ceiling. You can select (g)(h) or (i)(j) on the unit. For connection with the unit, use the SPEAKERS BACK or HEIGHT terminals.
Step 1: Connections Instructions on how to connect speakers When using commercially available banana plugs: tighten the speaker terminals to the end and then insert the banana plugs. Do not insert the core of speaker cable directly into the hole for banana plug of speaker terminal. (North American models) Cut and remove the plastic coating from the end of the speaker cable, twist the core and connect it to the terminal.
Step 1: Connections 2 Connecting the TV and players TV HDMI IN HDMI OUT To use the ARC function, connect to the ARC compatible HDMI jack of the TV and make an appropriate setting on the unit. See "2 Source Connection" of "Step 2: Initial Setup". Game console HDMI OUT HDMI OUT HDMI cable Blu-ray Disc/ DVD player HDMI OUT HDMI OUT Satellite/Cable set-top box, etc.
Step 1: Connections modify the settings to enable the input selection link with CEC (Consumer Electronics Control) compliant device, connection with ARC compatible TV, and HDMI Standby Through function. See "2 Source Connection" of "Step 2: Initial Setup". ●● Another TV can be connected to the HDMI OUT SUB jack. ●● To enjoy HDCP2.2 protected video, connect the player to one of the HDMI IN1 to IN3 jacks and connect the unit and the TV via HDMI. You will be unable to view images protected by HDCP2.
Step 1: Connections Network connection 3 Other connections AM/FM antenna connections Connect the antennas to listen to AM/FM broadcast. When listening to the broadcast for the first time, adjust the antenna position and orientation to get the best reception. You can enjoy Internet radio, DLNA and AirPlay by connecting the unit to LAN. The unit can be connected to the router with an Ethernet cable or to the wireless LAN router with Wi-Fi connection.
Step 2: Initial Setup "Initial Setup" automatically starts on the TV when you first turn the unit on. Initial Setup Language Select Before Start Setup is performed as a series of responses to questions asked by the unit. Select the item with the cursors of the remote controller and press ENTER to confirm your selection. To return to the previous screen, press RETURN. ●● Switch the input on the TV to that assigned to the unit.
Step 2: Initial Setup ¼¼ The subwoofer sound may not be detected since it is extremely low frequencies. Set the subwoofer volume to around the half of its maximum volume. ¼¼ Measurement may be interrupted if there is ambient noise or radio frequency interference. In this case, close the window and turn off the home appliance and fluorescent light. 2. After placing the microphone at the measurement position, select "Do it Now" with the cursors and press ENTER. 3.
Step 2: Initial Setup ●● If you changed the initial setting of the access point to skip password entry, step 3 is unnecessary. ●● If you changed the initial setting of the access point to hide the SSID, see "When the access point is not displayed". 3. Select and set the authentication method. The "Enter Password" screen may be displayed automatically if the wireless LAN router does not have an automatic setting button.
Step 2: Initial Setup PIN code: Select this method when the automatic setting button of the access point is beyond the reach. Select "PIN code" with the cursor buttons and press ENTER to display the 8-digit PIN code. Register the displayed PIN code to the access point, select "OK" with the cursor buttons and press ENTER. For how to register the PIN code to the access point, refer to its instruction manual. 4. Select "Yes, Start to Check" in the network connection confirmation screen.
Step 3: Playing Back 1 Basic Operations 1 z RECEIVER button: Turns the unit on or into standby Part names and functions of the remote controller mode. 2 REMOTE MODE/INPUT SELECTOR buttons: Switch 1 When using the remote controller to operate the AV receiver: The remote controller of this unit has the remote mode function for controlling other devices. You cannot control this unit when the remote controller is in the remote mode other than RECEIVER mode (for controlling this unit).
Step 3: Playing Back 2 Network Functions You can enjoy sources such as Internet radio by connecting the unit to a network. For details on the operation, see the Advanced Manual. ●● The on-screen displays are not displayed when the OSD language is set to Chinese. Operate by confirming the display on the main unit. (European, Australian, Taiwanese and Asian models) start playback. ●● This unit needs to be connected to the same router as a computer or NAS device.
Step 3: Playing Back 4 Bluetooth ® You can wirelessly enjoy music files stored in a smartphone or other Bluetooth-enabled device. The coverage area is 48 feet (15 meters). ●● The Bluetooth-enabled device needs to support the A2DP profile. ●● Note that connection is not always guaranteed with all Bluetooth-enabled devices. Pairing Pairing is necessary when connecting the Bluetoothenabled device for the first time.
Step 3: Playing Back 6 Multi-zone Making Multi-zone Connection You can listen to audio in a room (called Zone 2) other than the one where this unit is located (called the main room). Sources you can playback ● ● ● ● External players NET Bluetooth AM/FM Radio Important: Connection with external players To listen to a player in Zone 2, you must connect using an RCA cable, a digital optical cable (OPTICAL), or a digital coaxial cable (COAXIAL). Some players may require audio output setting.
Step 3: Playing Back Performing Multi-zone Playback It is possible to perform playback in the main room and a separate room at the same time, for example by playing the Blu-ray Disc player in the main room where the unit is placed while playing Internet radio in a separate room. It is also possible to perform playback only in a separate room. ●● With external players, it is possible to play the same source or different sources in the main room and separate room.
Step 3: Playing Back "Setup"-"2. Speaker"-"Equalizer Settings" to "Preset1" to "Preset3". The same sound field setting is applied to all ranges when set to "Off". ●● It cannot be set if the listening mode is Pure Audio (European, Australian and Asian models) or Direct. Music Optimizer: Improve the quality of the compressed audio. Playback sound of lossy compressed files such as MP3 will be improved. The setting can be separately set to each input selector.
Others Troubleshooting keep distance between TV antenna cable and cables of the unit. ●● If you connect a player supporting HDCP2.2, be sure to connect it to one of the HDMI IN1 to IN3 jacks of the unit. Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device.
Others Specifications Network Section Amplifier Section Rated Output Power (North American) With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 110 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output. Surround Mode Output Power () (6 ohms, 1 kHz THD 0.9%) 175 W per channel ¼¼ Reference output for each speakers. Depending on the source and the listening mode settings, there may be no sound output.
Others Table of image resolutions Resolutions supported by HDMI Refer to the following table for information about the image formats and resolutions output by this unit in response to input signals Input HDMI Component Composite Output HDMI 4K 4K 1080p/24 1080p 1080i 720p 480p/576p 480i/576i 1080p 1080i 720p 480p/576p 480i/576i 480i/576i 1080p/24 1080p 1080i 720p 480p/576p Input support Content protection technology 480i/576i HDMI input IN1 to IN3 HDCP1.4 HDCP2.
Others Precautions For European Models Declaration of Conformity We declare, under our sole responsibility, that this product complies with the standards: –– Safety –– Limits and methods of measurement of radio disturbance characteristics –– Limits for harmonic current emissions –– Limitation of voltage changes, voltage fluctuations and flicker –– RoHS Directive, 2011/65/EU –– Hereby, Onkyo Corporation, declares that this TX-NR747 is in compliance with the essential requirements and other relevant provisio
Others License and Trademark Information "Made for iPod", "Made for iPhone" and "Made for iPad" mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Manufactured under license from Dolby Laboratories.
Others GNU License Important Notice Regarding Software The software package installed in this product includes software licensed to Onkyo Corporation (hereinafter, called "Onkyo") directly or indirectly by third party developers. Please be sure to read this notice regarding such software.
Others To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.
Others NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (3) libcurl COPYRIGHT AND PERMISSION NOTICE Copyright (c) 1996 - 2007, Daniel Stenberg, . All rights reserved.
Others mailto: moeller@gwdgv1.dnet.gwdg.de mailto: mogul@pa.dec.com mailto: tmoore@fievel.daytonoh.ncr.com mailto: kamal@whence.com mailto: derek@toybox.demon.co.uk mailto: d@hd.org mailto: Rainer.Pruy@informatik.uni-erlangen.de mailto: dirce@zk3.dec.com mailto: wsanchez@apple.com mailto: mrapple@quack.kfu.com mailto: jack@innovativeinternet.com mailto: schnitz@unipress.com mailto: shields@tembel.org mailto: pebbles.jpl.nasa.gov mailto: harlan@pfcs.com mailto: ken@sdd.hp.com mailto: ajit@ee.udel.
Others END OF TERMS AND CONDITIONS APPENDIX: How to apply the Apache License to your work. To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format.
En-31 150416_TX-NR747_BAS_En_SN29401986.
Supplied Accessories How to use the remote controller Indoor FM antenna --- (1) Remote control sensor AV Receiver AM loop antenna --- (1) Remote controller (RC-898M) --- (1) Batteries (AA/R6) --- (2) Power cord (European and Taiwanese models) --- (1) Speaker setup microphone --- (1) Batteries (AA/R6) Approx. 16 ft. (5 m) ¼¼ If you do not use the remote controller for a long time, remove the batteries to prevent leakage.