Owner's Manual

Advanced Settings
29
Setting Item Default Value Setting Details
Subwoofer Phase 0° Bass sound of the subwoofers may be insufficient
depending on the type of sound and the listening
position. In that case, change the phase of
subwoofers. Set the phase value while listening to
the sound so that you can obtain your preferred
bass sound.
"0°": The subwoofer is in normal phase.
"180°": The subwoofer is in reverse phase.
r
The setting cannot be changed if "Subwoofer" is
set to "No".
Double Bass ----- Boost bass output by feeding bass sounds from
the front left and right, and center speakers to the
subwoofer.
"On": Bass output will be boosted.
"Off(THX)": Bass output will not be boosted.
r
The setting will not automatically be configured
even if you performed the automatic speaker
setup.
r
If "Subwoofer" is set to "No" or if "Front" is set
to other than "Full Band", the setting cannot be
changed.
r
If you're using THX-certified speakers, we recommend the following settings:
– Set a value "80Hz(THX)" in Crossover frequency.
– Set a value "80Hz(THX)" in LPF of LFE.
– Set a value "Off(THX)" in Double Bass.
Speaker Distance
Set the distance from each speaker to the listening position. Settings are automatically
configured if you use the automatic speaker setup.
Setting Item Default Value Setting Details
Unit feet/meters Specify the unit of distance for configuring settings.
"feet": When setting in feet (0.1 ft to 30.0 ft, in
increments of 0.1 ft)
"meters": When setting in meters (0.03 m to 9.00 m,
in increments of 0.03 m)
Front Left 12.0ft/3.60m Specify the distance between each speaker and the
listening position.
Setting Item Default Value Setting Details
Wide Left 12.0ft/3.60m Specify the distance between each speaker and the
listening position.
r
In the following cases, the settings cannot be
changed.
– "Speaker Settings" - "Front Speakers Type" is
set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is set
to "Yes" and also Zone 2 is set to on.
Center 12.0ft/3.60m Specify the distance between each speaker and the
listening position.
Wide Right 12.0ft/3.60m Specify the distance between each speaker and the
listening position.
r
In the following cases, the settings cannot be
changed.
– "Speaker Settings" - "Front Speakers Type" is
set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is set
to "Yes" and also Zone 2 is set to on.
Front Right 12.0ft/3.60m Specify the distance between each speaker and the
listening position.
Surround Right 7.0ft/2.10m Specify the distance between each speaker and the
listening position.
Back Right 7.0ft/2.10m Specify the distance between each speaker and the
listening position.
r
The setting is not displayed if "Speaker
Configuration" - "Back" is set to other than
"None" and also "Back ch" is set to "1ch".
r
In the following cases, the settings cannot be
changed.
– "Speaker Settings" - "Front Speakers Type" is
set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is set
to "Yes" and also Zone 2 is set to on.