Owner's Manual

Advanced Settings
30
Setting Item Default Value Setting Details
Back Left 7.0ft/2.10m Specify the distance between each speaker and the
listening position.
r
The setting is not displayed if "Speaker
Configuration" - "Back" is set to other than
"None" and also "Back ch" is set to "1ch".
r
In the following cases, the settings cannot be
changed.
– "Speaker Settings" - "Front Speakers Type" is
set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is set
to "Yes" and also Zone 2 is set to on.
Back 7.0ft/2.10m Specify the distance between each speaker and the
listening position.
r
The setting is displayed if "Speaker
Configuration" - "Back" is set to other than
"None" and also "Back ch" is set to "1ch".
r
The settings cannot be changed, when "Speaker
Settings" - "Powered Zone 2" is set to "Yes" and
also Zone 2 is set to on.
Surround Left 7.0ft/2.10m Specify the distance between each speaker and the
listening position.
Subwoofer 12.0ft/3.60m Specify the distance between each speaker and the
listening position.
Height Left 9.0ft/2.70m Specify the distance between each speaker and the
listening position.
r
In the following cases, the settings cannot be
changed.
– "Speaker Settings" - "Height Speakers Type"
is set to "Not Use".
– "Speaker Settings" - "Powered Zone 2" is set
to "Yes" and also Zone 2 is set to on.
Height Right 9.0ft/2.70m Specify the distance between each speaker and the
listening position.
r
In the following cases, the settings cannot be
changed.
– "Speaker Settings" - "Height Speakers Type"
is set to "Not Use".
– "Speaker Settings" - "Powered Zone 2" is set
to "Yes" and also Zone 2 is set to on.
r
When the speaker is set to "No" or "None" in "Speaker Configuration", the settings for "Speaker
Distance" cannot be changed.
r
Default values vary depending on the regions.
Level Calibration
Adjust the level of each speaker with the built-in test tone. Settings are automatically
configured if you use the Automatic Speaker Setup.
Setting Item Default Value Setting Details
Front Left 0.0dB Select a value between "-12.0dB" to "+12.0dB". A
test tone will be output each time you change the
value. Select the desired level.
Wide Left 0.0dB Select a value between "-12.0dB" to "+12.0dB". A
test tone will be output each time you change the
value. Select the desired level.
r
In the following cases, the settings cannot be
changed.
– "Speaker Settings" - "Front Speakers Type"
is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is
set to "Yes" and also Zone 2 is set to on.
Center 0.0dB Select a value between "-12.0dB" to "+12.0dB". A
test tone will be output each time you change the
value. Select the desired level.
Wide Right 0.0dB Select a value between "-12.0dB" to "+12.0dB". A
test tone will be output each time you change the
value. Select the desired level.
r
In the following cases, the settings cannot be
changed.
– "Speaker Settings" - "Front Speakers Type"
is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is
set to "Yes" and also Zone 2 is set to on.
Front Right 0.0dB Select a value between "-12.0dB" to "+12.0dB". A
test tone will be output each time you change the
value. Select the desired level.
Surround Right 0.0dB Select a value between "-12.0dB" to "+12.0dB". A
test tone will be output each time you change the
value. Select the desired level.