Owner's Manual

Reference Information
67
r
Remote playback does not support the gapless
playback.
r
For playback via wireless LAN, the sampling rate of
88.2 kHz or higher, DSD and Dolby TrueHD are not
supported.
Note:
r
With remote playback, this unit does not support the following
music file formats:
– FLAC, Ogg Vorbis, DSD and Dolby TrueHD.
■
MP3 (.mp3 or .MP3)
r
Supported formats: MPEG-1/MPEG-2 Audio Layer 3
r
Supported sampling rates: 8|kHz, 11.025|kHz, 12|kHz,
16|kHz, 22.05|kHz, 24|kHz, 32|kHz, 44.1|kHz, 48|kHz
r
Supported bitrates: Between 8 kbps and 320 kbps and
VBR.
■
WMA (.wma or .WMA)
r
Supported sampling rates: 8|kHz, 11.025|kHz,
16|kHz, 22.05|kHz, 32|kHz, 44.1|kHz, 48|kHz
r
Supported bitrates: Between 5 kbps and 320 kbps and
VBR.
r
WMA Pro/Voice formats are not supported.
■
WMA Lossless (.wma or .WMA)
r
Supported sampling rates: 44.1|kHz, 48|kHz, 88.2|kHz,
96|kHz
r
Quantization bit: 16 bit, 24 bit
■
WAV (.wav or .WAV)
WAV files contain uncompressed PCM digital audio.
r
Supported sampling rates: 8|kHz, 11.025|kHz, 12|kHz,
16|kHz, 22.05|kHz, 24|kHz, 32|kHz, 44.1|kHz, 48|kHz,
64|kHz, 88.2|kHz, 96|kHz, 176.4|kHz and 192|kHz
r
Quantization bit:
8 bit, 16 bit, 24 bit
½
For playback from a USB storage device, sampling rates of 176.4|kHz
and 192|kHz are not supported.
■
AAC (.aac/.m4a/.mp4/.3gp/.3g2/.AAC/.M4A/.MP4/.3GP
or .3G2)
r
Supported formats: MPEG-2/MPEG-4 Audio
r
Supported sampling rates: 8|kHz, 11.025|kHz, 12|kHz,
16|kHz, 22.05|kHz, 24|kHz, 32|kHz, 44.1|kHz, 48|kHz,
64|kHz, 88.2|kHz, 96|kHz
r
Supported bitrates: Between 8 kbps and 320 kbps and
VBR
■
FLAC (.flac or .FLAC)
FLAC is a file format for lossless audio data
compression.
r
Supported sampling rates: 8|kHz, 11.025|kHz, 12|kHz,
16|kHz, 22.05|kHz, 24|kHz, 32|kHz, 44.1|kHz, 48|kHz,
64|kHz, 88.2|kHz, 96|kHz, 176.4|kHz and 192|kHz
r
Quantization bit: 8 bit, 16 bit, 24 bit
½
For playback from a USB storage device, sampling rates of 176.4|kHz
and 192|kHz are not supported.
■
Ogg Vorbis (.ogg or .OGG)
r
Supported sampling rates: 8|kHz, 11.025|kHz, 16|kHz,
22.05|kHz, 32|kHz, 44.1|kHz, 48|kHz
r
Supported bitrates: Between 32 kbps and 500 kbps and
VBR.
r
Incompatible files cannot be played.
■
LPCM (Linear PCM)
r
Supported sampling rates: 44.1|kHz, 48|kHz
r
Quantization bit: 16 bit
½
Only for playback via DLNA.
■
Apple Lossless (.m4a/.mp4/.M4A/.MP4)
r
Supported sampling rates: 8|kHz, 11.025|kHz, 12|kHz,
16|kHz, 22.05|kHz, 24|kHz, 32|kHz, 44.1|kHz, 48|kHz,
64|kHz, 88.2|kHz, 96|kHz
r
Quantization bit: 16 bit, 24 bit
■
DSD (.dsf or .DSF)
r
Supported sampling rates: 2.8224|MHz, 5.6448|MHz
½
For playback from a USB storage device, sampling rates of 5.6448|MHz
is not supported.
■
Dolby TrueHD (.vr/.mlp/.VR/.MLP)
r
Supported sampling rates: 48|kHz, 64|kHz, 88.2|kHz,
96|kHz, 176.4|kHz, 192|kHz
½
For playback from a USB storage device, only sampling rates of 48|kHz
is supported.
½
Playback via DLNA is not supported.
Radio Wave Caution
The AV receiver uses a 2.4 GHz radio wave
frequency, which is a band used by other wireless
systems as 1 and 2 described below.
1. Devices which use a 2.4 GHz radio wave frequency
r
Cordless phones
r
Cordless facsimiles
r
Microwave ovens
r
Wireless LAN devices (IEEE802.11b/g/n)
r
Wireless AV equipment
r
Wireless controllers for game systems
r
Microwave oven-based health aids
r
Video transmitter
r
Specific type of external monitor and LCD display
2. Less common devices which use a 2.4 GHz radio wave
frequency
r
Anti-theft systems
r
Amateur radio stations (HAM)
r
Warehouse logistic management systems
r
Discrimination systems for train or emergency
vehicles
If these devices and the AV receiver are used at the same
time, the audio may be undesirably stopped or disturbed
due to a radio wave interference.
Suggestions for improvement
r
Switch off the devices which emit the radio wave.
r
Place the interfering devices away from the AV
receiver.
r
The AV receiver uses radio wave, and a third person can
receive the wave on purpose or accidentally. Do not use
the communication for important or fatal matters.
r
We assume no responsibility whatsoever for any error
or damage of network environment or access device
resulting from the use of this apparatus.
Confirm with the provider or access device maker for
more information.