Owner's Manual

Advanced Settings
29
Speaker Distance
Set the distance from each speaker to the listening position. Settings are automatically
configured if you use the automatic speaker setup.
Setting Item Default Value Setting Details
Unit feet/meters Specify the unit of distance for configuring settings.
"feet": When setting in feet (0.1 ft to 30.0 ft, in
increments of 0.1 ft)
"meters": When setting in meters (0.03 m to 9.00 m,
in increments of 0.03 m)
Front Left 12.0 ft/3.60 m Specify the distance between each speaker and the
listening position.
Wide Left 12.0 ft/3.60 m Specify the distance between each speaker and the
listening position.
Center 12.0 ft/3.60 m Specify the distance between each speaker and the
listening position.
Wide Right 12.0 ft/3.60 m Specify the distance between each speaker and the
listening position.
Front Right 12.0 ft/3.60 m Specify the distance between each speaker and the
listening position.
Surround Right 7.0 ft/2.10 m Specify the distance between each speaker and the
listening position.
Back Right 7.0 ft/2.10 m Specify the distance between each speaker and the
listening position.
Back Left 7.0 ft/2.10 m Specify the distance between each speaker and the
listening position.
Surround Left 7.0 ft/2.10 m Specify the distance between each speaker and the
listening position.
Subwoofer 12.0 ft/3.60 m Specify the distance between each speaker and the
listening position.
Height Left 9.0 ft/2.70 m Specify the distance between each speaker and the
listening position.
Height Right 9.0 ft/2.70 m Specify the distance between each speaker and the
listening position.
•
In the following cases, the settings for "Speaker Distance" cannot be changed:
– The speaker is set to "No" or "None" in "Speaker Configuration".
– "Powered Zone 2" is set to "Yes" and also Zone2 is set to on.
•
Default values vary depending on the regions.
Level Calibration
Adjust the level of each speaker with the built-in test tone. Settings are automatically
configured if you use the Automatic Speaker Setup.
Setting Item Default Value Setting Details
Front Left 0 dB Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change the
value. Select the desired level.
Wide Left 0 dB Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change the
value. Select the desired level.
Center 0 dB Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change the
value. Select the desired level.
Wide Right 0 dB Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change the
value. Select the desired level.
Front Right 0 dB Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change the
value. Select the desired level.
Surround Right 0 dB Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change the
value. Select the desired level.
Back Right 0 dB Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change the
value. Select the desired level.
Back Left 0 dB Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change the
value. Select the desired level.
Surround Left 0 dB Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change the
value. Select the desired level.
Subwoofer 0 dB Select a value between "-15 dB" to "+12 dB". A
test tone will be output each time you change the
value. Select the desired level.
Height Left 0 dB Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change the
value. Select the desired level.