TX-NR838 AV RECEIVER Advanced Manual CONTENTS AM/FM Radio Receiving Function 2 Tuning into a Radio Station 2 Registering an AM/FM Radio Station 3 Using RDS (European, Australian and Asian models) 3 Playing Content from a USB Storage Device 5 Listening to Internet Radio 6 About Internet Radio 6 TuneIn 6 Pandora®–Getting Started (U.S.
AM/FM Radio Receiving Function AM/FM Radio Receiving Function Tuning into stations manually Tuning into stations by frequency 1. Press TUNER on the main unit several times to select It allows you to directly enter the frequency of the radio station you want to listen to. either "AM" or "FM". 1. Press TUNER on the remote controller several times to select either "AM" or "FM". Tuning into a Radio Station Tuning into stations automatically 2.
AM/FM Radio Receiving Function Registering an AM/FM Radio Station It allows you to register up to 40 of your favorite AM/FM radio stations. Registering radio stations in advance allows you to tune into your radio station of choice directly. Registering a Station 1. Tune into the AM/FM radio station you want to register. 2. Press MEMORY on the unit so that the preset number Selecting a Preset Radio Station 1. Press CH +/- on the remote controller to select a preset number.
AM/FM Radio Receiving Function Searching by Type (PTY) 1. Press RT/PTY/TP on the main unit twice. • The current program type appears on the display. Nation M (National music) Oldies (Oldies music) Folk M (Folk music) Document (Documentary) 3. Press ENTER to search the radio stations of the selected type. 2. Press PRESET to select the type of program to search for. 4. When such a radio station is found, the indication on the display flashes. Then, press ENTER again.
Playing Content from a USB Storage Device 2. Plug your USB storage device with the music files into Playing Content from a USB Storage Device Operation: You can set up by viewing the guidance displayed on the TV screen. To display the guidance, you need to make HDMI connection between the unit and TV. Select the item with the cursor buttons of the remote controller and press ENTER to confirm your selection. To return to the previous screen, press RETURN.
Listening to Internet Radio Listening to Internet Radio About Internet Radio Internet radio, also called net radio, web radio or streaming radio, is an audio service accessible at the websites of service providers who distribute music and audio programs in digital format. There are numerous websites all over the world, from terrestrial station, special station to personal website that provide such a service.
Listening to Internet Radio Regarding the TuneIn Account Playing Back Create a New Station Creating an account on the TuneIn website (tunein.com) and logging in it from the unit allows you to automatically add radio stations and programs to your "My Presets" on the unit as you save them on the website . To display a radio station registered in "My Presets", you must log into TuneIn from the unit.
Listening to Internet Radio SiriusXM Internet Radio (North American only) If you want to listen to the service, you must subscribe. To subscribe go to www.siriusxm.com/internetradio with your computer. When you subscribe, you will be provided with a username and password which has to be entered into the AV receiver. To use SiriusXM Internet Radio, you must have your AV receiver connected to the Internet.
Listening to Internet Radio Slacker Personal Radio (North American only) Operation: You can set up by viewing the guidance displayed on the TV screen. To display the guidance, you need to make HDMI connection between the unit and TV. Select the item with the cursor buttons of the remote controller and press ENTER to confirm your selection. To return to the previous screen, press RETURN. Playing Back 1. Press NET on the remote controller to display NET TOP screen.
Listening to Internet Radio Registering Other Internet Radios Registering a Station Registering a Station with PC To listen to other Internet radio program, register the program in the "My Favorites" list on the NET TOP screen as described below. The unit supports Internet radio stations stored in the following formats: PLS (URL ending in .pls), M3U (URL ending in .m3u) and RSS (URL ending in rss/rdf/ xml). •• You can register up to 40 Internet radio stations.
Listening to Internet Radio To rename the registered radio station: While the radio station is being played or when it is selected from the "My Favorites" list, press MENU to display the menu screen. Select "Rename this station" with the cursors and press ENTER to display the keyboard screen. Rename the station as desired. •• Radio stations can be renamed also from "WEB Setup". Playing a Registered Radio Station 4. Select "Delete from My Favorites" with the curosrs, and then press ENTER.
DLNA Music Streaming DLNA Music Streaming •• With Windows Media Player 12 Remote Playback function, you can stream music files stored on your PC to the unit by operating the PC.
DLNA Music Streaming 5. With the cursors, select the music file to play, and then press ENTER or to start playback. • If "No Item" is displayed, check whether the network is properly connected. Controlling Remote Playback from a PC You can use this unit to play music files stored on your PC by operating the PC inside your home network. The unit supports remote playback with Windows Media Player 12.
Music Streaming from a Shared Folder Music Streaming from a Shared Folder About Shared Folder A shared folder is configured in a network device such as a PC or NAS (hard disk connected to your home network) for access from other users. You can play music files in a shared folder on your PC or NAS connected to the same home network as that of the unit.
Music Streaming from a Shared Folder 2. Select "Home Media" with the cursors, and then press ENTER. 3. Select the target server with the cursors, and then press ENTER. • You can check the server name of your PC from the PC properties. 4. Select the target shared folder with the cursors, and then press ENTER. 5. If a username and password is required, enter the necessary login information. • The login information is the account information set at the time of creating the shared folder.
Using Remote Controller for Playing Music Files H SEARCH: This button toggles between the playback Using Remote Controller for Playing Music Files 5 1 6 2 7 About the Remote Controller The remote controller of this unit allows you to play music files stored on USB storage devices, Internet radio, PCs and NAS devices on your home network, as well as on Bluetooth-enabled devices. It also allows you to view information of the music file being played and perform various other operations.
Using the Listening Modes MOVIE/TV button Using the Listening Modes Selecting Listening Mode The listening modes allow you to select the best sound effect for your input source. 1. Press RCV on the remote controller. • Always press RCV first to change the remote controller to RECEIVER mode (the mode to operate this unit) since its mode may be changed to operate another component. 2. Press one of the following buttons depending on your choice from among the four listening modes.
Using the Listening Modes PLIIx Game/PLII Game PLIIz Height T-D THX Games THX S2 Games THX button You can select a THX listening mode. •• Selectable listening modes: THX Cinema THX Music THX Games THX S2 Cinema THX S2 Games THX S2 Music THX Surr EX PURE AUDIO button (main unit only) The display and analog video circuit is cut off to switch the unit to PURE AUDIO mode and provide purer sound. Selecting this mode lights the PURE AUDIO indicator on the unit.
Using the Listening Modes •• This listening mode can be selected only if your Blu-ray Disc/DVD player is digitally connected to the unit or the player's output setting is bitstream. Dolby Pro Logic IIx/Dolby Pro Logic II This mode expands any 2 ch source for 7.1-ch playback. It provides a very natural and seamless surround-sound experience, keeping the sound clear. •• In case of 5.1 ch without surround back speaker, the mode becomes Dolby Pro LogicII instead of Dolby Pro Logic IIx.
Using the Listening Modes •• Playback becomes DTS if no surround back speaker is connected. ES Matrix (DTS-ES Matrix) This mode is for use with DTS-ES Matrix soundtrack and enables 6.1 ch or 7.1 ch playback using matrix-encoded back channel. •• Input source: 6.1 ch •• Speaker configuration: 7.1 ch surround back •• This listening mode can be selected only if your Blu-ray Disc/DVD player is digitally connected to the unit or the player's output setting is bitstream.
Using the Listening Modes source and multichannel source. Surround back sound will differ depending on the source and selected listening mode. – Dolby Pro Logic II Game + THX Select2 Games: The combination of Dolby Pro Logic II/IIx*8 and THX Cinema/Music/Games modes can be used. The PLII/ PLIIx and THX indicators light on the unit’s display. •• Input source: STEREO •• Speaker configuration: 7.
Using the Listening Modes Dolby Digital Plus and Dolby TrueHD programs. When playing back software which has been encoded in Dolby Digital, Dolby Digital Plus and Dolby TrueHD, sometimes you may see a brief message in the front panel display which will read "DialogNorm: X dB" (X being a numeric value). The display is showing how the program level relates with THX calibration level. If you want to play the program at calibrated theatrical levels, you may wish to adjust the volume.
Advanced Settings 4. Press / to select the desired menu, and then press Operation Advanced Settings 1. Press RCV on the remote controller. • Always press RCV first to change the remote controller to RECEIVER mode (the mode to operate this unit) since its mode may be changed to operate another component. ENTER. SETUP 1. Input/Output Assign 1. Monitor Out 2. HDMI Input 3. Component Video Input How to Set 4. Composite Video Input 5.
Advanced Settings 1.Input/Output Assign Setting Item Resolution Monitor Out The video input signals input to the unit will be converted when they are output from the HDMI OUT jack to the TV so that their resolution can match that of the TV used. Setting Item Default Value Setting Details Monitor Out MAIN Select the jack to be used for HDMI output.
Advanced Settings HDMI Input Component Video Input It is possible to change assignment of input selector buttons and the HDMI IN jacks. CBL/SAT button is assigned to COMPONENT VIDEO IN jack as factory default setting. This assignment can be changed if necessary. If you do not assign a jack, select "-----". Setting Item Default Value Setting Details BD/DVD HDMI 1 "HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to BD/DVD button. If you do not assign a jack, select "-----".
Advanced Settings Composite Video Input Digital Audio Input It is possible to change assignment of input selector buttons and the COMPOSITE VIDEO IN V1 to 3 jacks. It is possible to change assignment of input selector buttons and the DIGITAL IN COAXIAL 1 to 3/OPTICAL 1 to 2 jacks. Setting Item Default Value Setting Details Setting Item Default Value Setting Details BD/DVD ----- "VIDEO 1" to "VIDEO 3": Desired COMPOSITE VIDEO IN jack can be assigned to BD/DVD button.
Advanced Settings 2.Speaker Setup Speaker Configuration Allows you to change the speaker configuration such as presence or not of subwoofer, crossover frequency, and so on. Settings are automatically configured if you use the Automatic Speaker Setup. Furthermore, this setting cannot be selected if headphones are connected or audio is output from the speakers of the TV. Allows you to change the speaker configuration such as presence or not of each speaker, crossover frequency, and so on.
Advanced Settings Setting Item Default Value Setting Details Setting Item Default Value Setting Details Back 80Hz(THX) Select the crossover frequency from "40Hz" to "200Hz" to start outputting bass frequencies for each channel. "Full Band": Full band will be output. "None": When no compatible speaker is connected •• In the following cases, the setting will be set to "None": –– "Surround" is set to "None". –– "Front Speakers Type" is set to "Bi-Amp".
Advanced Settings Speaker Distance Level Calibration Set the distance from each speaker to the listening position. Settings are automatically configured if you use the automatic speaker setup. Adjust the level of each speaker with the built-in test tone. Settings are automatically configured if you use the Automatic Speaker Setup. Setting Item Default Value Setting Details Setting Item Default Value Setting Details Unit feet/meters Specify the unit of distance for configuring settings.
Advanced Settings Setting Item Default Value Setting Details Height Right 0 dB Select a value between "-12 dB" to "+12 dB". A test tone will be output each time you change the value. Select the desired level. THX Audio Setup Setting Item Default Value Setting Details Surr Back Speaker Spacing >4ft/>1.2m Select the distance between the surround back speakers from the following values. When "Unit" is set to "feet" in "Speaker Distance": Select a value from "<1ft", "1ft-4ft", and ">4ft".
Advanced Settings Setting Item Default Value Setting Details 3.Audio Adjust Loudness Plus On When the "Loudness Plus" setting is set to "On", it is possible to enjoy even subtle nuances of audio expression at low volume. This is only available when the THX listening mode is selected. "On": Use this function "Off": Do not use this function THX Loudness Plus THX Loudness Plus is a new volume control technology featured in THX Ultra2 Plus™ and THX Select2 Plus™ Certified receivers.
Advanced Settings Dolby Setting Item Default Value Setting Details Make the settings for Dolby listening mode. Loudness Management On Enable the Late Night function that allows you to enjoy surround sound of Dolby TrueHD playback even in low volume.
Advanced Settings LFE Level 4.Source Setup Set the low-frequency effect (LFE) level of the Dolby Digital, DTS, Multichannel PCM, Dolby TrueHD, DTS-HD Master Audio and DSD signals. Adjust the volume level difference among the multiple devices connected to this unit, rename an input selector, or adjust the image quality. The setting can be separately set to each input selector button. When you select a desired input to check the video or audio, start playback of the connected device.
Advanced Settings Name Edit Picture Adjust Set an easy name to each input. The set name will be shown on the main unit display. Adjust the image quality. (Possible only when the video player is connected to the HDMI OUT MAIN jack) If you adjust it by checking the video, press ENTER. Press RETURN to return the screen to the previous status. Setting Item Default Value Setting Details Name Input name 1. Select a character or symbol with the cursors and press ENTER.
Advanced Settings Setting Item Default Value Setting Details Picture Mode Custom An appropriate image quality setting for cinema or game can be selected. You can also adjust each item to obtain your favorite image quality. "Custom": The items from "Game Mode" to "Color Temperature" below can be adjusted as desired. "Cinema": When the video source is cinema "Game": When the video source is game "Standard": The resolution will be changed but the image quality will not be adjusted.
Advanced Settings Audio Selector 5.Listening Mode Preset Make the audio input setting. The setting can be separately set to each input selector button. Select the input selector to configure. You can preset your favorite listening mode to each input. (For example, you can always apply straight decode to the Dolby TrueHD source of Blu-ray Disc to play it in unchanged sound field.) Select the input, signal type and listening mode.
Advanced Settings 6.Miscellaneous OSD Setup Volume Setup Make the setting of on-screen display function that can display the setting menu screen, volume operation screen and the like on the TV. Make the detailed volume setting of the unit. Setting Item Default Value Setting Details Volume Display Absolute Switch the volume display between the absolute value and relative value. The absolute value 82 is equivalent to the relative value 0 dB.
Advanced Settings Setting Item Default Value Setting Details Zone 3 Out Fixed Select which of the integrated amplifier in a separate room or this unit should be used to adjust the volume when Zone 3 is active. "Fixed": Adjust on the Integrated amplifier in a separate room "Variable": Adjust on the unit Zone 3 Maximum Volume Off Set the maximum value for Zone 3 to avoid too high volume. Select a value from "Off", "50" to "99".
Advanced Settings Setting Item Default Value Setting Details Setting Item HDMI Through Off You can display the video of an HDMI connected player on the TV even if the unit is in standby mode. This setting is effective only for an input selector to which an HDMI jack is assigned in "HDMI Input". It cannot be set to any other input selector unless an HDMI jack is assigned to it. "Off": The setting is disabled. Video of device connected to any jack will not be displayed.
Advanced Settings Setting Item Default Value Setting Details Audio TV Out (SUB) Off You can enjoy audio through the speakers of the HDMI connected TV while this unit is on. "On": Use this function "Off": Do not use this function •• Listening mode cannot be changed while "Audio TV Out (SUB)" is set to "On" and audio is being output through the speakers of the TV.
Advanced Settings Network Setting Item Default Value Setting Details Make the network setting. •• When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the setting automatically. ("Enable" is set by default) To assign fixed IP addresses to each components, you must set "DHCP" to "Disable" and assign an address to this unit in "IP Address" as well as set information related to your LAN, such as Subnet Mask and Gateway.
Advanced Settings Setting Item Default Value Setting Details Setting Item Default Value Setting Details Auto Reconnect On This function automatically reconnects to the Bluetooth-enabled device connected last when you change the input selector to "BLUETOOTH". "On": Use this function "Off": Do not use this function •• This function may not work depending on your Bluetooth-enabled device. Status – Displays the status of the Bluetooth-enabled device connected to the unit.
Advanced Settings 8.Remote Controller Setup Setting Item Default Value Setting Details Remote ID 1 Select an ID for the unit's remote controller from "1", "2", and "3" to prevent interference between the unit and other Onkyo components that are installed in the same room. After changing the ID on the main unit, change the ID on the remote controller accordingly with the following procedure. 1. While holding down RCV, press Q SETUP for about 3 seconds until the remote indicator lights. 2.
Operating Other Components with the Remote Controller 1. Press RCV and then press HOME on the remote Operating Other Components with the Remote Controller controller. Functions of REMOTE MODE Buttons You can control any other device than this unit by programming a specified remote control code to a REMOTE MODE button of the remote controller. Register a remote control code to a desired REMOTE MODE button and press it to enter the remote mode that allows you to operate the corresponding device. 2.
Operating Other Components with the Remote Controller The remote indicator stays lit in the input mode. 3. With the number buttons, enter the 5-digit remote control code within 30 seconds. • The registration is complete when the remote indicator flashes twice. The remote indicator flashes once slowly when registering the remote control code fails. Try the registration again. 2. Within 30 seconds, press the colored buttons from left to right, in the order you want to remap.
Operating Other Components with the Remote Controller 5 GUIDE 6 / / / , ENTER 7 SETUP 8 PREV CH 9 RETURN F AUDIO () 1 REMOTE MODE 2 SOURCE 3 MUTING 4 CH +/-, DISC +/- 2 1 G H 5 8 3 6 7 9 4 F I J , , , , , , () G H A (Red), B (Green), C (Yellow), D (Blue) I Number 1 to 9, 0, +10 J CLR, DISPLAY ½½ Not CEC-compatible.
Operating Other Components with the Remote Controller Satellite Receiver/Cable Receiver Operation Press the REMOTE MODE button programmed with the remote control code for the relevant AV component to switch the remote controller mode to that for the AV component. Then, operate by using the corresponding buttons. Available buttons vary depending on the product category of the component. Operation may be incorrect or impossible depending on the product.
Operating Other Components with the Remote Controller 1 REMOTE MODE 2 SOURCE 3 MUTING 4 4 , (Reverse Playback), , , , , To Operate CEC-compatible Components The TV and BD/DVD buttons on the remote controller are preprogrammed with remote control codes for linked operation of some CEC(Consumer Electronics Control)compatible TV sets and Blu-ray Disk players. By connecting to the unit via HDMI, you may operate them using the AV receiver's remote controller.
Advanced Speaker Connection 4 Select "Bi-Amp" with the cursors. Advanced Speaker Connection Bi-Amping •• Before bi-amping, be sure to remove the shortcircuit connector that connects the tweeter (treble) terminal and the subwoofer (bass) terminal. •• Use speakers supporting bi-amping only. For details, refer to the speakers' instruction manual.
Connecting and Operating Onkyo RI Components Connecting and Operating Onkyo RI Components 1. Press DISPLAY for 3 or more seconds while holding RI Connection and Setting down the REMOTE MODE button to which you want to program the remote control code. • The remote indicator stays lit. • The RCV, ZONE2, ZONE3 and TV buttons cannot be programmed.
Connecting and Operating Onkyo RI Components iPod/iPhone Operation The RI Dock allows you to use the AV receiver's remote controller to operate and play music on your iPod/iPhone. Moreover, it also allows you to view videos on your iPod/ iPhone on the screen of your TV, as well as perform RI operations if connected via RI. This operation is possible only when the RI remote control code is programmed.
Control Function between the Unit and External Component Control Function between the Unit and External Component You can enable the control functions between the unit and external devices using the terminals below. Special devices or cable connections are necessary to enable the functions. For more information about preparation, contact the specialized stores. RS232 port Use the port for connection with a commercially available integrated control system that can enable home automation.
Firmware Update Updating the Firmware via Network Firmware Update About Firmware Update There are two methods for updating the firmware: via network and via USB. Use the one that best suits your environment. •• For the latest information on updates, visit the Onkyo website. •• Before updating, make sure that the speaker setup microphone is not connected.
Firmware Update If an Error Message is Displayed Updating the Firmware via USB Case 1: When an error occurs, "- Error!" is appeared on the display of the unit. ("" represents an alphanumeric character.) Check the following: Before Start: •• Prepare a 64 MB or larger USB storage device. – Media inserted in a USB card reader may not be used for this function. – USB storage devices with security function are not supported. – USB hubs and USB devices with hub function are not supported.
Firmware Update The Home menu is displayed on the TV screen. If an Error Message is Displayed Case 1: When an error occurs, "- Error!" is appeared on the display of the unit. ("" represents an alphanumeric character.) Check the following: HOME Setup 7. With the cursors, select "Setup" - "7.Hardware Setup" "Firmware Update" - "Update via USB", and then press ENTER. • If "7.Hardware Setup" is grayed out and cannot be selected, wait for a while until it starts up.
Troubleshooting Troubleshooting Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the HDMI linked operation does not work, disconnecting/connecting the HDMI cable may solve it.
Troubleshooting ■■ Only the center speaker produces sound •• If you use the Dolby Pro Logic II listening mode with a mono source, such as an AM radio station or mono TV program, the sound is concentrated in the center speaker. •• Make sure the speakers are configured correctly. ■■ The surround speakers produce no sound •• When the T-D (Theater-Dimensional), Stereo or Mono listening mode is selected, the surround speakers produce no sound.
Troubleshooting •• "Resolution" is effective only for the HDMI OUT MAIN jack if "Monitor Out" is set to "MAIN+SUB". ■■ There is no picture from a source connected to an HDMI IN •• Reliable operation with an HDMI-to-DVI adapter is not guaranteed. In addition, video signals from a PC are not supported. •• Check if "Resolution Error" is displayed on the main unit display when video input via HDMI IN jack is not displayed. In this case, the TV does not support the resolution of the video input from the player.
Troubleshooting ■■ iPod/iPhone does not work properly •• Try reconnecting your iPod/iPhone. Multi-zone Function ■■ There is no sound •• When you connect a CD player or such other player without HDMI output jack, connect it to the analog audio input jacks of the unit. Multi-zone output is not possible if the connection is only with digital optical cable or digital coaxial cable. In case of analog connection, analog audio output setting may be necessary on the player.
Troubleshooting NET/USB Function ■■ Cannot access the network server •• When NET is blinking, the AV receiver is not properly connected to the home network. •• Make sure your network server has been started up. •• Make sure your network server is properly connected to the home network. •• Make sure your network server is correctly set. •• Make sure that the router LAN side port is properly connected to the AV receiver. •• Make sure that the correct IP address is allocated in "7.Hardware Setup" - "Network".
Troubleshooting ■■ The picture on your TV/monitor connected to the HDMI output(s) is unstable •• Try turning the DeepColor function off. To turn off the DeepColor function, press STB/DVR and ON/STANDBY on the AV receiver simultaneously. While holding down STB/DVR, press ON/STANDBY repeatedly until “Deep Color: Off” is appeared on the display. To reactivate the DeepColor function, repeat the above described step until “Deep Color: On” appears on the display. Radio Wave Caution The AV receiver uses a 2.
Troubleshooting Regarding the Video Resolution See below the video signal types and resolutions that the unit can output when it receives the input signals of the following types and resolutions. The supported resolutions are shown as "Input: Output".
Reference Information Reference Information Linked Operation with CEC-compatible Components The AV receiver is compatible with the following components (as of January 2014).
Reference Information About HDMI HDMI (High Definition Multimedia Interface) is a digital interface standard for connecting TVs, projectors, Bluray Disc/DVD players, set-top boxes, and other video components. Until now, several separate video and audio cables have been required to connect AV components. With HDMI, a single cable can carry control signals and digital audio of digital video (2-channel PCM, multichannel digital audio, and multichannel PCM). The HDMI video stream (i.e.
Reference Information ■■ CAT5 Ethernet cable The Ethernet cable is a cable that actually connects components that comprise the network. There are straight type and cross type Ethernet cables. •• Use a shielded CAT5 Ethernet cable (straight-type) to connect the unit to your home network. Consult your cable store for details of Ethernet cable. ■■ Network server (When PC etc./network server is used) Component that stores music files and provides those files at the time of playback.
Reference Information •• Remote playback does not support the gapless playback. Note: •• With remote playback, this unit does not support the following music file formats: – FLAC, Ogg Vorbis, DSD and Dolby TrueHD. ■■ MP3 (.mp3 or .MP3) •• Supported formats: MPEG-1/MPEG-2 Audio Layer 3 •• Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz •• Supported bitrates: Between 8 kbps and 320 kbps and VBR. ■■ WMA (.wma or .
Reference Information Remote Control Code List Television (A to E) A.R.
Reference Information ESA Euroman Europa Europhon Evesham Technology Excello Exquisit 10171 10037 10037 10037 11667 11037 10037 Genesis Genexxa GFM Gibralter Gibson Gintai Godrej GoGen GoldStar 12676 11585 10625, 11037, 10037, 10195, 11585, 12676 10037, 10171 10208 11667, 10714, 12676, 10037, 10556 10714, 10037, 11037, 10208, 10556 10208 10037 10037 10037 11636 10037 11826 10809 10809 13817, 10171, 11394, 11037, 10714 11037 10037 10037 11755 11447, 10178, 10625, 11454 10037 Goodmans Television (F to
Reference Information LG LiesenKotter Lifetec Linetech Linsar Local India Brand Local Malaysia Brand Lodos Loewe Logik Luma Lumatron Lumenio Lux May Luxor LXI Madison Magnavox Magnum Manesth Manhattan Marantz Mark Mastro Masuda Matsui 11840, 11860, 11423, 12731, 12182, 12358, 12362, 10178, 12424, 10037, 10714, 10017, 10556, 10698 10037 10037, 11037, 10714 12676 12676, 11667, 11585 10208 10698 11037 10633 11037, 10698, 11585 11037 10037 10037 10037 11037, 12676, 10208 10178 10037 12372, 11454, 11506, 1017
Reference Information Philips Phocus Phoenix Phonola Pioneer PJ Plantron Playsonic Polaroid Powerpoint Prima Prinston Pro Vision Profitronic Proline Proscan Prosonic Protech Proton Pulsar Pye Qingdao Quadro Quasar Quelle R-Line Radiola Radiomarelli 70 10037, 12800, 10556, 11887, 11867, 11506, 12372, 12680, 11454, 10171, 11365, 10017, 10000, 10178, 11394 10714 10037 10037, 10556 11457, 10037, 10698, 11636, 12171 11506 10037 10714, 10037 12676, 11826 10037, 10698 12461 11037 10037, 10556, 10714 10037 106
Reference Information Television (T to Z) Tacico Tai Yi Talent Tashiko Tatung TCL TCM Teac Tec Tech Line Technica Technics Technika TechniSat Technisson Techno Technosonic Techwood Tecnimagen Teco Tedelex Teknika TELE System Telecor Telefunken Telefusion Telegazi Telemeister Telesonic Telestar Teletech Teleview 10178, 11150 11150 10178 10650, 11150 10037, 11150 12434, 13183, 13426, 12414, 10698 10714 10037, 11037, 10698, 10714, 11755, 10171, 10178 10037 10037, 11585 11037 10556, 10650 11667, 12676 10
Reference Information Matsui Medion Mitsubishi OK.
Reference Information Integra Irradio ITT JDB JMB JVC Kansas Technologies Kendo Kennex Kenwood Kiiro Kupperbusch Leiker Lenco Lexicon LG Lifetec Linetech Linsar Lodos Loewe Logik Lumatron Lunatron Luxman Luxor Magnavox Manhattan Marantz Mark Marquant Matsui Maxim 32147, 30627, 31769, 30503, 31612, 30571, 31634 31233, 30646 31233 30730 32966 30623, 31602, 30503, 30539, 32966 31233 30713, 30831 30713, 30770 30490 30770 32966 30872 30713, 30770 32545 30741, 31602, 31233 30831 32966 32966 30713 30741, 30539
Reference Information Supratech Sylvania Symphonic Sytech Tandberg Targa Tascam Tatung TBoston Tchibo TCM Teac Technica Technics Technika Technosonic Techwood Telefunken Teletech Tensai Theta Digital Thomson Tokai Toshiba TRANS-continents Transonic Trevi TVE United Universum Urban Concepts Venturer Vestel VIZIO 74 32139 30675, 30630 30675 30831 30713 30741 31818 30770 32139 30741 30741 30571, 30675, 30741, 31818, 32139, 34004 30713 30490 30770, 30831 30730 30713, 32966 30551, 32966 30713 30770 30571 305
Reference Information ADB Advanced Broadband Advanced Telemedia Airwave Networks Akado Alabama Broadband Alcom Algona Municipal Utilities All West Communications Alleghany Cablevision Allegiance Communications Alliance Communications Allied Telesis Almega Cable Alpine Cable Alta Utilities Alternative Cable Altibox Altitude Communications Americable International American Broadband 02586, 01920, 01481, 01998, 02437, 03028 01376, 01877, 01982 01376, 01877, 01982 01376, 01982 02043 01376 02437 01376, 01877,
Reference Information Branch Cable Brandenburg Telecom Brandywine Cablevision Bresnan Briand et Moreau Cable Bright Green Communications Bright House Bristol Tennessee Essential Services Bristol Virginia Utilities 01376, 01877, 01982 01481, 01998, 03028 01376, 01877, 01982 01376, 01877 01376, 01877, 01982 01376, 01877, 01982 01877, 01376 01877, 01998 01376, 01877, 01982 British American 01376, 01877, 01982 Broadstar 01376, 01877, Communications 01982 Broadstripe 01376 Brockway Television 01376, 01877, 019
Reference Information Chester Telephone Chinook Progressive Club TV Chippewa Valley Cable Choice Cable TV Choice Communications Choice Television ChoiceCable Christy Cablevision CimTel Cincinnati Bell Circle Bar Cable Television Cisco Citizens Cable Citizens Cable TV Citizens Cablevision Citizens Mutual Telephone Citizens Telecom Citizens Telephone City Cablevision City of Barnesville Cable City of Baxter Springs Cable City of Hawarden Cable City of Norway Cable City of Quitman Cable 01376 01376, 01877, 0
Reference Information Crow Cable TV CRRS-TV CRST Telephone Authority Crystal Cable TV CSI Cable CT & R Cable CTC Cunningham Telephone & Cable Curtis Cable TV 01376, 01877, 01982 01376 01481, 01998, 03028 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376 01376 01376, 01877, 01982 CUTV 01376, 01877, 01982 CWA Cable 01376, 01877, 01982 D & D Cable Systems 01376, 01877, 01982 D & P Communications 01376 Daeryung 01877 Dairyland Cable 01376, 01877, Systems 01982 Dakota Central 02345 Telecommunic
Reference Information Fort Towson Cable Foster Communications Frank Howard TV Cable Frankfort Plant Board Cable Freebox FTC Full Channel TV Full Choice Communications Fusion Broadband Futuristic Cablevision Galaxy American Communication Galaxy Cable 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376 01976 01877, 01982, 01376 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01998 Gardonville Cooperative Telephone Gatehous
Reference Information Horizon Cable TV Horizon Telecom Horry Telephone Cooperative Hospers Telephone 01376, 02586 02586 01376, 01877, 01982 01376, 01877, 01982 Hotwire 02586 Houston Cable 01376, 01877, 01982 Hrvatski Telekom 02132 HTC Communications 01481, 01998, 03028 HTC Services 01376, 01877, 01982 Humax 00660, 02620, 02043, 02165 HunTel Systems 01376 Huxley 01376, 01877, Communications 01982 Hydaburg Cable TV 01376, 01877, 01982 HYDE County 01376, 01877, Cablevision 01982 i-CAN 02437 I-Speed 01376, 018
Reference Information Liberty Cablevision 01376 Liberty 01481, 02586 Communications Limestone Cablevision 01376, 01877, 01982 Lincoln Cable 01376 Television Lincolnville 01376 Lindsey 01376, 01877, Communications 01982 LISCO 01376, 01877, 01982 Litestream Holdings 01376, 01877, 01982 LNE Telco 01376, 01877, 01982 Localtel 01376, 01877, 01982 Lockesburg 01376, 01877 Cablevision Lodgenet 01376, 01877, Entertainment 01982 Lone Pine Cable TV 01376, 01877, 01982 Longview 01376, 01877, Communications 01982 Lonsda
Reference Information Mountain Shadows Cable TV Mountain Telecommunications Mountain Zone TV 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 Movistar 03288 Moxi 02187 Mt. Baker Cable 01376, 01877, 01982 MTC 01376, 01877, 01982 MTC Technologies 01376, 01982 MTS 01998 Multiband Cable 01376, 01877, 01982 Municipality Cable 01376, 01877, Operator 01982 Murphy Cable 01376, 01877 Murray Electric System 01376, 01877, 01982 Muscatine Power & 01376 Water N.W.
Reference Information Oxford Networks 01376, 01877, 01982 Pace 01877, 01060, 02620, 01982, 01582, 01376, 01883, 02401, 03454 Packerland Broadband 01376 Paleajook Cooperative 01376, 01877, 01982 Palmer Mutual 01376, 01877, Telephone 01982 Palmetto Rural 00858 Telephone Cooperative Panasonic 01982 Pangnirtung 01376, 01877, Cooperative 01982 Panhandle Telephone 01376 Panora 01481 Telecommunications Paragould Light & 01376, 01877, Water 01982 Parish 01376, 01877, Communications 01982 Park Region Mutual 01481,
Reference Information Ridgewood Cablevision Ringgold Telephone 01376, 01877, 01982 01376, 01877, 01982 Rio Virgin Telephone 01376, 01877, 01982 Riondel Community 01376, 01877, Cable Society 01982 Ripley Video Cable 01376, 01877, 01982 Ritter Cable 01376, 01877, 01982 River Road Cable 01376, 01877, 01982 River Valley Cable TV 01376, 01877, 01982 River Valley 01481, 01998, Telecommunications 03028 Riverside Cablevision 01376, 01877, 01982 Riviera Cable TV 01376, 01877, 01982 Robins Cable TV 01376, 01877, 019
Reference Information South Slope Communications Southeast Cable TV Southern Cayuga County Cable Southern Coastal Cable Southern Kansas Telephone Southern Plains Cable Southern Vermont Cable Southey Cable 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376 01376, 01877, 01982 01376, 01982 01376, 01877, 01982 Southside TV 01376, 01877, 01982 Southwest MN 01376, 01877, Broadband 01982 Southwestern Bell 01376, 01877, Video Services 01982 Spanish Fork 01376, 01877, 01982 Spen
Reference Information Trans-Video Trappers Loop Communications Trenton Cable Tri-County Cable TV TrioTel Communications Troy Cablevision Trust Cable TV TruVista Tudjaat Cooperative Tulalip Broadband Tullahoma Utilities Tulugak Cooperative Turquoise Turtle TV TV Cable TV Cable Company of Andalusia TV Cable of Winamac TV Northeast TV Service TVB TVC TVision TVMAX TVS Cable Twin Valley Communications 86 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376 01376, 01877, 01982 01376 01376, 01877,
Reference Information Western Wisconsin Communications Westman Communications Westphalia Broadband Wetherell Satellite Cable TV WFL Cable Television White County Video WideOpenWest Wikstrom Systems Wilco Electronic Systems Wilkes Telecommunications Willamette Broadband Windbreak Cable TV Windjammer Cable Windom Communications Windstream Winslow Communications Wire Tele-View 01376, 02586 WTCI Cable 01376, 02187 Wyandotte Municipal Yadkin Valley Telecom Ycom Networks 02586 01376, 01877, 01982 01376, 0187
Reference Information Foxtel Freesat Freesat+ Frontier Communications Fuji Onkyo Galaxis General Instrument General Satellite Globo GoGen GOI Gold Box Gold Vision Goodmans Gradiente Grocos Grundig Hanseatic HD+ HDT Hirschmann Hitachi Hornet HTS Huawei Hughes Network Systems Humax ibox ID Digital Illusion Imagin 88 01356, 00879, 01176 01692, 02376 02443 00775 01631 00853, 00879 00869 01176 02026, 02957 02738 00775 00853 01631 01284, 02376, 02034 00887, 00856, 00099 01409 00847, 02376, 02034, 01284, 00853
Reference Information Shinelco Sigmatek SilverCrest SKY Sky Brasil SKY Deutschland SKY Italia SKY Mexico SKY New Zealand SKY PerfecTV! SkyCable SkyLife Skylink Skymaster Skyplus SkySat Skyworth SL SM Electronic Smart Sony Star Star Choice Stream System Strong Sunny Sunstech Supernova T-Mobile 02738 02738, 02813 02026 00856, 00847, 01662, 00887, 01175, 02619, 01693, 00099, 01114, 01377, 01915, 02467, 03469 00856, 00887, 01377, 02619 02443, 01114, 01915, 02620 01693, 02467, 00853, 01356 00856, 02619, 0088
Reference Information Western Digital Woxter Xbox ZT Group 02558 02709 01805, 01272 01272 CD Advantage AH! Aiwa Arcam Atoll Electronique Audio Research Audiolab Audiomeca Audioton AVI Balanced Audio Technology Cairn California Audio Labs Cambridge Cambridge Audio Carver CCE Cyrus Denon DKK DMX Electronics Dynaco Genexxa Goldmund Grundig Harman/Kardon Hitachi Integra JVC Kenwood Krell Linn Loewe Magnavox 90 70032 70157 70157 70157 70157 70157 70157 70157 70157 70157 70157 70157 70029, 70303 70157 7015
Reference Information Cisco Citycable Cogeco Comcast Cox Darty Box Digeo Freebox Grande Communications Humax ImOn Communications Insight Inter Mountain Cable Kabel Deutschland Knology Mediacom MetroCast Cablevision Midcontinent Communications Motorola Moxi NET NorthwesTel Novus Numericable Pace Panasonic Philips Pioneer RCN Rogers Sagem Samsung 01877, 02589, 01982, 01582, 01883, 02401, 03265 03477 01376, 01877, 01982 01376, 01877, 01982, 02187 01877, 01376 02436 02187 01976 01877, 01376 02620, 02165 01877
Reference Information Microwave Satellite Technologies Millennium Telecom Minburn Communications MM&G Enterprises Motorola Movistar MTS NDTC North Central Telephone North Dakota Telephone North State Communications Norvado Nsight NU Telecom Oi TV Open IPTV Optimus Clix Orange OTEC Communications Pace Panora Telecommunications Paul Bunyan Communications Pine Island Telephone Polar Communications Poplar Bluff Municipal Utilities Portugal Telecom Price County Telephone Project Mutual Telephone 92 01481, 019
Reference Information Sony TiVo 20636 20739, 20636 93
Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, OSAKA 541-0041, JAPAN http://www.onkyo.com/ The Americas 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. For Dealer, Service, Order and all other Business Inquiries: Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ For Product Support Team Only: 1-800-229-1687 Europe Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4208-213 http://www.eu.onkyo.
